[1] 常军, 翁志成, 姜会林, 等. 宽覆盖、离轴空间相机光学系统的设计[J].光学 精密工程, 2003, 11(1): 55-58.

    CHANG Jun, WENG Zhicheng, JIANG Huilin, et al. Design of optical system for space camera with long focal length, wide coverage and high resolution[J]. Optics and Precision Engineering, 2003, 11(1): 55-58.

[2] 张科科, 阮宁娟, 傅丹鹰. 国外空间用三反离轴相机发展分析与思考[J].航天返回与遥感, 2008, 29(3): 63-70.

    ZHANG Keke, RUAN Ningjuan, FU Danying. Analysis and consideration of development of overseas space off-axis TMA system camera[J]. Spacecraft Recovery & Remote Sensing, 2008, 29(3): 63-70.

[3] 张雷, 贾学志. 大型离轴三反相机桁架式主支撑结构的设计与优化[J].光学 精密工程, 2009, 17(3): 603-608.

    ZHANG Lei, JIA Xuezhi. Design and optimization of trussed supporting structure for off-axis three-mirror reflective space camera[J]. Optics and Precision Engineering, 2009, 17(3): 603-608.

[4] 李威, 刘宏伟, 郭权锋, 等. 空间相机主次镜间的薄壁筒和支杆组合支撑结构[J].光学 精密工程, 2010, 18(12): 2633-2641.

    LI Wei, LIU Hongwei, GUO Quanfeng, et al. Combined supporting structure of thin wall joint cylinder and supporting bar between primary mirror and second mirror in space camera[J]. Optics and Precision Engineering, 2010, 18(12): 2633-2641.

[5] 李威, 刘宏伟. 空间光学遥感器中碳纤维复合材料精密支撑构件的结构稳定性[J].光学 精密工程, 2008, 16(11): 2173-2179.

    LI Wei, LIU Hongwei. Structure stability of precision component made of carbon fiber composite in space optical remote sensor[J]. Optics and Precision Engineering, 2008, 16(11): 2173-2179.

[6] 张雷, 金光. 同轴轻型空间遥感器支撑桁架的设计与试验[J].光学 精密工程, 2010, 18(5): 1099-1104.

    ZHANG Lei, JIN Guang. Design and test of supporting truss for light space remote sensor[J]. Optics and Precision Engineering, 2010, 18(5): 1099-1104.

[7] 范斌, 王艳. 国外长焦距高分辨率遥感相机桁架结构研究[J].航天返回与遥感, 2008, 29(2): 35-41.

    FAN Bin, WANG Yan. Research on truss structure of foreign remote-sensing cameras with long focal length and high resolution[J]. Spacecraft Recovery & Remote Sensing, 2008, 29(2): 35-41.

[8] 陈志平, 陈志远, 杨世模. 空间太阳望远镜主桁架的模态分析与试验[J].光电工程, 2004, 31(12): 1-3.

    CHEN Zhiping, CHEN Zhiyuan, YANG Shimo. Modal analysis and experiment on the main truss of Space Solar Telescope[J]. Opto-Electronic Engineering, 2004, 31(12): 1-3.

[9] O’Brien T P, Atwood B. Adjustable truss for support, optical alignment, and athermalization of a Schmidt camera[J]. Proc. of SPIE(S0277-786X), 2003, 4841: 403-410.

[10] Stanley S. Smeltzer III. Development of bonded joint technology for a rigidizable-inflatable deployable truss[J]. Proc. of SPIE(S0277-786X), 2006, 6222: 622201-1-11.

[11] 杨利伟, 李志来, 鲍赫. 基于静定空间桁架原理的空间相机结构设计[J].光电工程, 2010, 37(11): 73-77.

    YANG Liwei, LI Zhilai, BAO He. Design for structure of space camera based on the theory of statically determinate spatial frameworks[J]. Opto-Electronic Engineering, 2010, 37(11): 73-77.

[12] 陈志平, 杨世模, 胡企千, 等. 空间太阳望远镜主构架的力学分析与优化[J].计算力学学报, 2005, 22(1): 89-94.

    CHEN Zhiping, YANG Shimo, HU Qiqian, et al. Mechanical analysis and optimization of the main truss in space solar telescope[J]. Chinese Journal of Computational Mechanics, 2005, 22(1): 89-94.

[13] 林再文, 刘永琪, 梁岩, 等. 碳纤维增强复合材料在空间光学结构中的应用[J].光学 精密工程, 2007, 15(8): 1181-1185.

    LIN Zaiwen, LIU Yongqi, LIANG Yan, et al. Application of carbon fiber reinforced composite to optical structure[J]. Optics and Precision Engineering, 2007, 15(8): 1181-1185.

[14] 辛宏伟, 关英俊, 柴方茂. 离轴空间遥感器主支撑结构设计[J].光学 精密工程, 2012, 20(6): 1257-1264.

    XIN Hongwei, GUAN Yingjun, CHAI Fangmao. Design for main support of off-axis space remote sensor[J]. Optics and Precision Engineering, 2012, 20(6): 1257-1264.