中国激光, 2013, 40 (8): 0802007, 网络出版: 2013-07-26
800 mJ高光束质量全固态1319 nm脉冲激光器 下载: 549次
800 mJ High Beam Quality All-Solid-State 1319 nm Pulsed Laser
激光器 全固态激光器 高能量激光 1319 nm激光 光束质量 lasers all-solid-state laser high energy laser 1319 nm laser beam quality
摘要
报道了一台高能量、高光束质量激光二极管抽运全固态1319 nm激光器,激光器采用了主振荡器与放大器(MOPA)结构。通过反射镜镀膜和插入45°反射镜增加损耗以抑制1338 nm和1064 nm激光起振。主振荡器腔内插入温控法布里珀罗(F-P)标准具实现线宽压窄和波长选择。为充分提取放大器能量以获得高能量脉冲输出,两级激光放大器均为双程放大,并对激光驱动电源信号进行处理,使激光器主放大器注入激光脉冲与驱动电源脉冲在时域上的重合性更好。在主放大器抽运电流为140 A时获得了脉冲能量为800 mJ的1319 nm激光输出,光束质量因子M2=1.49,线宽为1.05 GHz,重复频率为50 Hz,脉宽约为200 μs。
Abstract
A high energy and high beam quality laser diode pumped all-solid-state laser is reported. Master oscillator and power amplifier construction is used. The 1338 nm and 1064 nm oscillations are suppressed by coating reflector and inserting 45° mirror to increase losses. A temperature-controlled Fabry-Porro etalon is inserted in resonant cavity to realizing linewidth narrowing and wavelength selecting. In order to achieve high output energy, the laser is amplified twice in pre-amplifier and main amplifier. Drive source signal is delayed to make injected laser pulse of main amplifier and drive source pulse time-synchronization better. When pumping current of the main amplifier is 140 A, the laser output energy is 800 mJ, the beam quality foctor M2 is 1.49, and the linewidth is 1.05 GHz. The repetition frequency is 50 Hz with the pulse width of about 200 μs.
李楠, 庞毓, 鲁燕华, 张雷, 谢刚, 王卫民, 许晓小. 800 mJ高光束质量全固态1319 nm脉冲激光器[J]. 中国激光, 2013, 40(8): 0802007. Li Nan, Pang Yu, Lu Yanhua, Zhang Lei, Xie Gang, Wang Weimin, Xu Xiaoxiao. 800 mJ High Beam Quality All-Solid-State 1319 nm Pulsed Laser[J]. Chinese Journal of Lasers, 2013, 40(8): 0802007.