[1] D’Urso P S 1998 Stereolithographic biomodelling in surgery PhD Thesis School of Medicine, The University of Queensland

[2] Pei X, Zhang B, Fan Y, Zhu X, Sun Y, Wang Q, Zhang X and Zhou C 2017 Bionic mechanical design of titanium bone tissue implants and 3D printing manufacture Mater. Lett. 208 133–7

[3] de Moraes P H, Olate S, Cantín M, Assis A F, Santos E, Silva F O and Silva L O 2015 Anatomical reproducibility through 3D printing in cranio-maxillo-facial defects Int. J. Morphol. 33 826–30

[4] Murr L E et al 2010 Next-generation biomedical implants using additive manufacturing of complex, cellular and functional mesh arrays Phil. Trans. A 368 1999–2032

[5] Ryan G, Pandit A and Apatsidis D P 2006 Fabrication methods of porous metals for use in orthopaedic applications Biomaterials 27 2651–70

[6] Hollander D A, Wirtz T, Von Walter M, Linker R, Schultheis A and Paar O 2003 Development of individual three-dimensional bone substitutes using ‘selective laser melting’ Eur. J. Trauma 29 228–34

[7] Bhargav A, Sanjairaj V, Rosa V, Feng L W and Yh J F 2017 Applications of additive manufacturing in dentistry: a review J. Biomed. Mater. Res. B 106B 2058–64

[8] Strietzel R 2010 Selective laser melting in dentistry Informatics in Oral Medicine: Advanced Techniques in Clinical and Diagnostic Techniques (Hershey, PA: ICI Global) pp 111–25

[9] Vandenbroucke B and Kruth J P 2008 Direct digital manufacturing of complex dental prostheses Bio-Materials and Prototyping Applications in Medicine (Boston, MA: Springer) pp 109–24

[10] Bibb R, Eggbeer D and Williams R 2006 Rapid manufacture of removable partial denture frameworks Rapid Prototyping J. 12 95–9

[11] Shi J, Zhu L, Li L, Li Z, Yang J and Wang X 2018 A TPMSbased method for modeling porous scaffolds for bionic bone tissue engineering Sci. Rep. 8 7395

[12] Cao X F, Song P J, Qiao Y J and Zhen P 2015 3D printing of bone tissue engineering scaffolds Chin. J. Tissue Eng. Res. 19 4076–80

[13] Yoo D 2012 New paradigms in internal architecture design and freeform fabrication of tissue engineering porous scaffolds Med. Eng. Phys. 34 762–76

[14] Melchels F P, Bertoldi K, Gabbrielli R, Velders A H, Feijen J and Grijpma D W 2010 Mathematically defined tissue engineering scaffold architectures prepared by stereolithography Biomaterials 31 6909–16

[15] Leong K F, Chua C K, Sudarmadji N and Yeong W Y 2008 Engineering functionally graded tissue engineering scaffolds J. Mech. Behav. Biomed. Mater. 1 140–52

[16] Leong K F, Cheah C M and Chua C K 2003 Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs Biomaterials 24 2363–78

[17] Zein I, Hutmacher D W, Tan K C and Teoh S H 2002 Fused deposition modeling of novel scaffold architectures for tissue engineering applications Biomaterials 23 1169–85

[18] Larsen R D, Svensson G K and Bj?rngard B E 1975 The use of wedge filters to improve dose distribution with the partial rotation technique Radiology 117 441–5

[19] Khaledy N, Arbabi A and Sardari D 2011 The effects of cutouts on output, mean energy and percentage depth dose of 12 and 14 MeV electrons J. Med. Phys. 36 213–9

[20] Hsu S-H, Roberson P L, Chen Y, Marsh R B, Pierce L J and Moran J M 2008 Assessment of skin dose for breast chest wall radiotherapy as a function of bolus material Phys. Med. Biol. 53 2593–606

[21] Evans P M, Hansen V N, Mayles W P M, Swindell W, Torr M and Yarnold J R 1995 Design of compensators for breast radiotherapy using electronic portal imaging Radiother. Oncol. 37 43–54

[22] Verhey L J 1995 Immobilizing and positioning patients for radiotherapy Semin. Radiat. Oncol. 5 100–14

[23] Allan E, Stanton A, Pye D, Collins C, Perry L, Filby M and Wilkinson J 1998 Fractionated high dose rate brachytherapy moulds—a precise treatment for carcinoma of the pinna Radiother. Oncol. 48 277–81

[24] Molineu A, Followill D S, Balter P A, Hanson W F, Gillin M T, Huq M S, Eisbruch A and Ibbott G S 2005 Design and implementation of an anthropomorphic quality assurance phantom for intensity-modulated radiation therapy for the radiation therapy oncology group Int. J. Radiat. Oncol. Biol. Phys. 63 577–83

[25] Shrimpton P C, Wall B F and Fisher E S 1981 The tissueequivalence of the Alderson Rando anthropomorphic phantom for x-rays of diagnostic qualities Phys. Med. Biol. 26 133–9

[26] Yaffe M J 1987 Anthropomorphic phantoms US Patent Specification 4638502

[27] Chan R, Manzke R, Stanton D A and Shechter G 2011 Anatomically and functionally accurate soft tissue phantoms and method for generating same US Patent Application 12/ 520326

[28] Khan F M and Gerbi B J 2012 Treatment Planning in Radiation Oncology (Philadelphia, PA: Kluwer)

[29] Thwaites D, Scalliet P, Leer J W and Overgaard J 1995 Quality assurance in radiotherapy. European society for therapeutic radiology and oncology advisory report to the commission of the European union for the ‘Europe against cancer programme Radiother. Oncol. 35 61–73

[30] Ferreira I H, Dutreix A, Bridier A, Chavaudra J and Svensson H 2000 The ESTRO-QUALity assurance network (EQUAL) Radiother. Oncol. 55 273–84

[31] Peters L J, O’Sullivan B, Giralt J, Fitzgerald T J, Trotti A, Bernier J, Bourhis J, Yuen K, Fisher R and Rischin D 2010 Critical impact of radiotherapy protocol compliance and quality in the treatment of advanced head and neck cancer: results from TROG 02.02 J. Clin. Oncol. 28 2996–3001

[32] Schweikard A 1995 Treatment planning method and apparatus for radiosurgery and radiation therapy US Patent Specification 5438125

[33] Ju S G, Kim M K, Hong C-S, Kim J S, Han Y, Choi D H, Shin D and Lee S B 2014 New technique for developing a proton range compensator with use of a 3-dimensional printer Int. J. Radiat. Oncol. ? Biol. ? Phys. 88 453–8

[34] Kim S-W, Shin H-J, Kay C S and Son S H 2014 A customized bolus produced using a 3-dimensional printer for radiotherapy PLoS One 9 e110746

[35] Arenas M, Sabater S, Sintas A, Arguis M, Hernandez V, Arquez M, Lopez I, Rovirosa A and Puig D 2017 Individualized 3D scanning and printing for non-melanoma skin cancer brachytherapy: a financial study for its integration into clinical workflow J Contemp. Brachyther. 9 270–6

[36] Ehler E D, Barney B M, Higgins P D and Dusenbery K E 2014 Patient specific 3D printed phantom for IMRT quality assurance Phys. Med. Biol. 59 5763–73

[37] Meyer T, Quirk S, D’Souza M, Spencer D and Roumeliotis M 2018 A framework for clinical commissioning of 3D-printed patient support or immobilization devices in photon radiotherapy J. Appl. Clin. Med. Phys. 19 499–505

[38] Harris B D, Nilsson S and Poole C M 2015 A feasibility study for using ABS plastic and a low-cost 3D printer for patientspecific brachytherapy mould design Australas. Phys. Eng. Sci. Med. 38 399–412

[39] Butson M J, Cheung T, Yu P and Metcalfe P 2000 Effects on skin dose from unwanted air gaps under bolus in photon beam radiotherapy Radiat. Meas. 32 201–4

[40] Robar J and Su S 2019 System and method for manufacturing bolus for radiotherapy using a three-dimensional printer US Patent Specification 10350435

[41] Canters R A, Lips I M, Wendling M, Kusters M, van Zeeland M, Gerritsen R M, Poortmans P and Verhoef C G 2016 Clinical implementation of 3D printing in the construction of patient specific bolus for electron beam radiotherapy for non-melanoma skin cancer Radiother. Oncol. 121 148–53

[42] Burleson S, Baker J, Hsia A T and Xu Z 2015 Use of 3D printers to create a patient-specific 3D bolus for external beam therapy J. Appl. Clin. Med. Phys. 16 5247

[43] Ehler E, Sterling D, Dusenbery K and Lawrence J 2018 Workload implications for clinic workflow with implementation of three-dimensional printed customized bolus for radiation therapy: a pilot study PLoS One 13 e0204944

[44] ?ukowiak M, Jezierska K, Boehlke M, Wi?cko M, ?ukowiak A, Podraza W, Lewocki M, Masoj? B and Falco M 2017 Utilization of a 3D printer to fabricate boluses used for electron therapy of skin lesions of the eye canthi J. Appl. Clin. Med. Phys. 18 76–81

[45] Park S-Y, Choi C H, Park J M, Chun M, Han J H and Kim J-I 2016 A patient-specific polylactic acid bolus made by a 3D printer for breast cancer radiation therapy PLoS One 11 e0168063

[46] Su S, Moran K and Robar J L 2014 Design and production of 3D printed bolus for electron radiation therapy J. Appl. Clin. Med. Phys. 15 4831–4831

[47] Ricotti R, Ciardo D, Pansini F, Bazani A, Comi S, Spoto R, Noris S, Cattani F, Baroni G and Orecchia R 2017 Dosimetric characterization of 3D printed bolus at different infill percentage for external photon beam radiotherapy Phys. Med. 39 25–32

[48] Markovic A 2017 3D printed bolus with flexible materials: treatment planning accuracy and practical aspects Int. J. Radiat. Oncol. Biol. Phys. 99 E696

[49] Park J M, Son J, An H J, Kim J H, Wu H-G and Kim J-I 2019 Bio-compatible patient-specific elastic bolus for clinical implementation Phys. Med. Biol. 64 105006

[50] 2019 PLA-Flex, S SOFT PLA-Flex Filament2Print (https:// filament2print.com/gb/special-pla/660-soft-pla-flex.html) (Accessed: 27 August 2019)

[51] Constantinou C and Harrington J C 1989 Tissue compensators made of solid water or lead for megavoltage x-ray radiotherapy Med. Dosim. 14 41–7

[52] Spicka J, Fleury K and Powers W 1988 Polyethylene-lead tissue compensators for megavoltage radiotherapy Med. Dosim. 13 25–7

[53] Chang S X, Cullip T J, Deschesne K M, Miller E P and Rosenman J G 2004 Compensators: an alternative IMRT delivery technique J. Appl. Clin. Med. Phys. 5 15–36

[54] Skinner L, Fahimian B P and Yu A S 2019 Tungsten filled 3D printed field shaping devices for electron beam radiation therapy PLoS One 14 e0217757

[55] Mohan R and Grosshans D 2017 Proton therapy—present and future Adv. Drug Deliv. Rev. 109 26–44

[56] Lee M-Y, Han B, Jenkins C, Xing L and Suh T-S 2016 A depth-sensing technique on 3D-printed compensator for total body irradiation patient measurement and treatment planning Med. Phys. 43 6137–44

[57] Park S-Y, Kim J.-I., Joo Y H, Lee J C and Park J M 2017 Total body irradiation with a compensator fabricated using a 3D optical scanner and a 3D printer Phys. Med. Biol. 62 3735–56

[58] Avelino S R, Silva L F and Miosso C J 2012 Use of 3Dprinters to create intensity-modulated radiotherapy compensator blocks Conf. Proc. IEEE Eng. Med. Biol. Soc. 2012 5718–21

[59] Zou W et al 2015 Potential of 3D printing technologies for fabrication of electron bolus and proton compensators J. Appl. Clin. Med. Phys. 16 4959

[60] CIRS Atom? Dosimetry Verification Phantoms—CIRS (https://cirsinc.com/products/radiation-therapy/atomdosimetry- verification-phantoms/) (Accessed: 28 August 2019)

[61] CIRS Pediatric Anthropomorphic Training Phantoms—CIRS (https://cirsinc.com/products/x-ray-fluoro/pediatricanthropomorphic- training-phantoms/) (Accessed: 1 June 2019)

[62] Radiology Support Devices 2019 The Alderson Radiation Therapy Phantom (http://rsdphantoms.com/radiationtherapy/ the-alderson-radiation-therapy-phantom/) (Accessed: 28 August 2019)

[63] Universal Medical 2019 RSD Transparent PIXY Phantom (https://universalmedicalinc.com/rsd-transparent-pixyphantom. html) (Accessed: 28 August 2019)

[64] Tino R, Yeo A, Leary M, Brandt M and Kron T 2019 A systematic review on 3D-printed imaging and dosimetry phantoms in radiation therapy Technol. Cancer Res. Treatment 18 31514632

[65] Filippou V and Tsoumpas C 2018 Recent advances on the development of phantoms using 3D printing for imaging with CT, MRI, PET, SPECT, and ultrasound Med. Phys. 45 e740–60

[66] Hazelaar C, Van Eijnatten M, Dahele M, Wolff J, Forouzanfar T, Slotman B and Verbakel W F A R 2018 Using 3D printing techniques to create an anthropomorphic thorax phantom for medical imaging purposes Med. Phys. 45 92–100

[67] Kamomae T et al 2017 Three-dimensional printer-generated patient-specific phantom for artificial in vivo dosimetry in radiotherapy quality assurance Phys. Med. 44 205–11

[68] Alssabbagh M, Tajuddin A A, Abdulmanap M and Zainon R 2017 Evaluation of 3D printing materials for fabrication of a novel multi-functional 3D thyroid phantom for medical dosimetry and image quality Radiat. Phys. Chem. 135 106–12

[69] Yea J W, Park J W, Kim S K, Kim D Y, Kim J G, Seo C Y, Jeong W H, Jeong M Y and Oh S A 2017 Feasibility of a 3D-printed anthropomorphic patient-specific head phantom for patient-specific quality assurance of intensity-modulated radiotherapy PLoS One 12 2017

[70] Hernandez-Giron I, den Harder J M, Streekstra G J, Geleijns J and Veldkamp W J H 2019 Development of a 3D printed anthropomorphic lung phantom for image quality assessment in CT Phys. Med. 57 47–57

[71] Mayer R, Liacouras P, Thomas A, Kang M, Lin L and Simone C B 2015 3D printer generated thorax phantom with mobile tumor for radiation dosimetry Rev. Sci. Instrum. 86 074301

[72] Jahnke P, Schwarz S, Ziegert M, Schwarz F B, Hamm B and Scheel M 2019 Paper-based 3D printing of anthropomorphic CT phantoms: feasibility of two construction techniques Eur. Radiol. 29 1384–90

[73] Jahnke P, Schwarz F B, Ziegert M, Almasi T, Abdelhadi O, Nunninger M, Hamm B and Scheel M 2018 A radiopaque 3D printed, anthropomorphic phantom for simulation of CTguided procedures Eur. Radiol. 28 4818–23

[74] Nowak L J and Pawlowska E 2019 Technical Note: an algorithm and software for conversion of radiotherapy contour-sequence data to ready-to-print 3D structures Med. Phys. 46 1829–32

[75] Leary M, Kron T, Keller C, Franich R, Lonski P, Subic A and Brandt M 2015 Additive manufacture of custom radiation dosimetry phantoms: an automated method compatible with commercial polymer 3D printers Mater. Des. 86 487–99

[76] Leary M, Tino R, Keller C, Franich R, Yeo A, Lonski P, Kyriakou E, Kron T and Brandt M 2019 Additive manufacture of lung equivalent anthropomorphic phantoms: a method to control hounsfield number utilizing partial volume effect J. Eng. Sci. Med. Diagnos. Ther. 3 011001

[77] Tino R, Leary M, Yeo A, Brandt M and Kron T 2019 Gyroid structures for 3D-printed heterogeneous radiotherapy phantoms Phys. Med. Biol. 64 21NT05

[78] Okkalidis N 2018 A novel 3D printing method for accurate anatomy replication in patient-specific phantoms Med. Phys. 45 4600–6

[79] Irnstorfer N, Unger E, Hojreh A and Homolka P 2019 An anthropomorphic phantom representing a prematurely born neonate for digital x-ray imaging using 3D printing: proof of concept and comparison of image quality from different systems Sci. Rep. 9 14357

[80] Yoon K, Jeong C, Kim S-W, Cho B, Kwak J, Kim S S, Song S Y, Choi E K, Ahn S and Lee S-W 2018 Dosimetric evaluation of respiratory gated volumetric modulated arc therapy for lung stereotactic body radiation therapy using 3D printing technology PLoS One 13 e0208685

[81] Jakobsen A, Iversen P, Gadeberg C, Hansen J L and Hjelm-Hansen M 1987 A new system for patient fixation in radiotherapy Radiother. Oncol. 8 145–51

[82] Dickens C 1981 Personalized fixation using a vacuum consolidation technique Br. J. Radiol. 54 257–8

[83] Landberg T, Svahn-Tapper G and Bengtsson C-G 1977 Whole-body-casts for patient immobilization in mantle treatment, treatment of the inverted-Y and moving strip Int. J. Radiat. Oncol. Biol. Phys. 2 809–13

[84] Bentel G C 1990 Positioning and immobilization device for patients receiving radiation therapy for carcinoma of the breast Med. Dosim. 15 3–6

[85] Bentel G 1991 Positioning and immobilization of patients undergoing radiation therapy for Hodgkin’s disease Med. Dosim. 16 111–7

[86] Buscher M 1990 A modification of the HS3 thoracic Alpha Cradle for breast/chestwall patients Med. Dosim. 15 19–20

[87] Frank L E, Rowley L A, Shanahan T G and Mehta M P 1990 Technical aspects in the use of ‘belly boards’ for small bowel minimization Med. Dosim. 15 13–6

[88] Goldschmidt E J Jr and Holst R J 1990 Medulloblastoma immobilization and treatment considerations Med. Dosim. 15 7–11

[89] Hook S and Pardy J 1990 Alpha cradles in breast cancer treatment: easy immobilization for the potentially difficult breast set up Med. Dosim. 15 21–4

[90] Makino N, Kaneka M, Tanaka Y, Takai M, Fuwa N, Kitazawa S and Gotoh S 1984 Clinical applications of patient’s positioning and immobilization using the rigid urethane foam Rinsho. Hoshasen. Clin. Radiogr. 29 1135–8

[91] Makino N 1984 Improvement of the immobilization method in combination with a rigid urethane foam supporter and a thermoplastic cast Nihon Igaku Hoshasen Gakkai zasshi. Nippon Radiol. 44 732

[92] Makino N 1984 Development of the head and neck immobilization device, using rigid polyurethane foam Nihon Igaku Hoshasen Gakkai zasshi. Nippon Radiol. 44 714–26

[93] Gerber R, Marks J and Purdy J 1982 The use of thermal plastics for immobilization Int. J. Radiat. Oncol. Biol. Phys. 8 1460–2

[94] Goldson A L, Young J Jr, Espinoza M C and Henschke U K 1978 Simple but sophisticated immobilization casts Int. J. Radiat. Oncol. Biol. Phys. 4 1105–6

[95] Tsujii H, Mizoe J.-E., Arimoto T, Kamada T, Shirato H and Irie G 1984 Treatment planning with head and neck immobilization shell Nippon Igaku Hoshasen Gakkai Zasshi 44 1391–5

[96] Verhey L J, Goitein M, McNulty P, Munzenrider J E and Suit H D 1982 Precise positioning of patients for radiation therapy Int. J. Radiat. Oncol. Biol. Phys. 8 289–94

[97] Inoue T, Chatani M, Teshima T, Hata K, Izawa K and Sasaki J 1985 Immobilization and reproducibility in radiotherapy for cancer of the larynx and pharynx using simplified shell and bite-block Strahlentherapie 161 642–5

[98] Wong J W, Binns W R, Cheng A Y, Geer L Y, Epstein J W, Klarmann J and Purdy J A 1990 On-line radiotherapy imaging with an array of fiber-optic image reducers Int. J. Radiat. Oncol. Biol. Phys. 18 1477–84

[99] Dimitriadis A, Kirkby K J, Nisbet A and Clark C H 2016 Current status of cranial stereotactic radiosurgery in the UK Br. J. Radiol. 89 20150452

[100] Stiegelis H E, Ranchor A V and Sanderman R 2004 Psychological functioning in cancer patients treated with radiotherapy Patient Educ. Counsel. 52 131–41

[101] Sharp L, Lewin F, Johansson H, Payne D, Gerhardsson A and Rutqvist L E 2005 Randomized trial on two types of thermoplastic masks for patient immobilization during radiation therapy for head-and-neck cancer Int. J. Radiat. Oncol. Biol. Phys. 61 250–6

[102] Oultram S, Findlay N, Clover K, Cross L, Ponman L and Adams C 2012 A comparison between patient self-report and radiation therapists’ ability to identify anxiety and distress in head and neck cancer patients requiring immobilization for radiation therapy J. Radiother. Pract. 11 74–82

[103] Goldsworthy S D, Tuke K and Latour J M 2016 A focus group consultation round exploring patient experiences of comfort during radiotherapy for head and neck cancer J. Radiother. Pract. 15 143–9

[104] Haefner M F et al 2018 3D-Printed masks as a new approach for immobilization in radiotherapy—a study of positioning accuracy Oncotarget 9 6490–8

[105] Laycock S D, Hulse M, Scrase C D, Tam M D, Isherwood S, Mortimore D B, Emmens D, Patman J, Short S C and Bell G D 2015 Towards the production of radiotherapy treatment shells on 3D printers using data derived from DICOM CT and MRI: preclinical feasibility studies J. Radiother. Pract. 14 92–8

[106] Fisher M, Applegate C, Ryalat M, Laycock S, Hulse M, Emmens D and Bell D 2014 Evaluation of 3D printed immobilisation shells for head and neck IMRT Open J. Radiol. 4 322–8

[107] Sousa E, Vieira L, Costa D, Costa D C, Parafita R and Loja A 2017 Comparison between 3D laser scanning and computed tomography on the modelling of head surface 3rd Int. Conf. Numerical and Symbolic Computation (SYMCOMP) pp 119–28

[108] Loja M A R, Craveiro D S, Vieira L, Sousa E, Rodrigues J A and Portal R J F 2019 Radiotherapycustomized head immobilization masks: from modeling and analysis to 3D printing Nucl. Sci. Tech. 30 142

[109] Michiels S et al 2016 Towards 3D printed multifunctional immobilization for proton therapy: initial materials characterization Med. Phys. 43 5392–402

[110] Ostyn M, Wang S, Kim Y-S, Kim S and Yeo W-H 2019 Radiotherapy-compatible robotic system for multi-landmark positioning in head and neck cancer treatments Sci. Rep. 9 1–9

[111] Cardenas M, Perks J and Benedict S 2019 A novel 3D-printed patient positioning platform to accommodate curved couch of MR scanner optimizes precision treatment planning workflow for abdominal radiotherapy Int. J. Radiat. Oncol. Biol. Phys. 105 S200–1

[112] Kitamori H, Sumida I, Tsujimoto T, Shimamoto H, Murakami S and Ohki M 2019 Evaluation of mouthpiece fixation devices for head and neck radiotherapy patients fabricated in PolyJet photopolymer by a 3D printer Phys. Med. 58 90–8

[113] Burns L, Young S, Beaudry J, Gill B, Coope R and Duzenli C 2019 Rapid prototyping, design and early testing of a novel device for supine positioning of large volume or pendulous breasts in radiotherapy World Congress on Medical Physics and Biomedical Engineering (Singapore: Springer) pp 429–35

[114] Guinot J L, Rembielak A, Perez-Calatayud J, Rodríguez-Villalba S, Skowronek J, Tagliaferri L, Guix B, Gonzalez-Perez V, Valentini V and Kovacs G 2018 GECESTRO ACROP recommendations in skin brachytherapy Radiother. Oncol. 126 377–85

[115] Ouhib Z, Kasper M, Calatayud J P, Rodriguez S, Bhatnagar A, Pai S and Strasswimmer J 2015 Aspects of dosimetry and clinical practice of skin brachytherapy: the American Brachytherapy Society working group report Brachytherapy 14 840–58

[116] Joslin C, Liversage W and Ramsey N 1969 High dose-rate treatment moulds by afterloading techniques Br. J. Radiol. 42 108–12

[117] Sabbas A M, Kulidzhanov F G, Presser J, Hayes M K and Nori D 2004 HDR brachytherapy with surface applicators: technical considerations and dosimetry Technol. Cancer Res. Treatment 3 259–67

[118] Laan R C, Nout R A, Dankelman J and van de Berg N J 2019 MRI-driven design of customised 3D printed gynaecological brachytherapy applicators with curved needle channels 3D Printing in Medicine 5 8

[119] Oare C, Wilke C, Ehler E, Mathew D, Sterling D and Ferreira C 2019 Dose calibration of Gafchromic EBT3 film for Ir-192 brachytherapy source using 3D-printed PLA and ABS plastics 3D Printi. Med. 5 3

[120] Baltz G C, Chi P-C M, Wong P-F, Wang C, Craft D F, Kry S F, Lin S S H, Garden A S, Smith S A and Howell R M 2019 Development and validation of a 3D-printed bolus cap for total scalp irradiation J. Appl. Clin. Med. Phys. 20 89–96

[121] Kong Y, Yan T, Sun Y, Qian J, Zhou G, Cai S and Tian Y 2019 A dosimetric study on the use of 3D-printed customized boluses in photon therapy: a hydrogel and silica gel study J. Appl. Clin. Med. Phys. 20 348–55

[122] Sasaki D K, McGeachy P, Aviles J E A, McCurdy B, Koul R and Dubey A 2019 A modern mold room: meshing 3D surface scanning, digital design, and 3D printing with bolus fabrication J. Appl. Clin. Med. Phys. 20 78–85

[123] An H J, Kim M S, Kim J, Son J, Choi C H, Park J M and Kim J-I 2019 Geometric evaluation of patient-specific 3D bolus from 3D printed mold and casting method for radiation therapy Prog. Med. Phys. 30 32–8

[124] Bustillo J P, Tumlos R and Remoto R Z 2019 Intensity modulated radiotherapy (IMRT) phantom fabrication using fused deposition modeling (FDM) 3D printing technique World Congress on Medical Physics and Biomedical Engineering (Singapore: Springer) pp 509–15

[125] Kadoya N, Abe K, Nemoto H, Sato K, Ieko Y, Ito K, Dobashi S, Takeda K and Jingu K 2019 Evaluation of a 3Dprinted heterogeneous anthropomorphic head and neck phantom for patient-specific quality assurance in intensitymodulated radiation therapy Radiol. Phys. Technol. 12 351–6

[126] Zhang F, Zhang H, Zhao H, He Z, Shi L, He Y, Ju N, Rong Y and Qiu J 2019 Design and fabrication of a personalized anthropomorphic phantom using 3D printing and tissue equivalent materials Quant. Imaging Med. Surg. 9 94

[127] Niebuhr N I, Johnen W, Echner G, Runz A, Bach M, Stoll M, Giske K, Greilich S and Pfaffenberger A 2019 The ADAMpelvis phantom-an anthropomorphic, deformable and multimodal phantom for MRgRT Phys. Med. Biol. 64 04NT05

[128] Makris D N, Pappas E P, Zoros E, Papanikolaou N, Saenz D L, Kalaitzakis G, Zourari K, Efstathopoulos E, Maris T G and Pappas E 2019 Characterization of a novel 3D printed patient specific phantom for quality assurance in cranial stereotactic radiosurgery applications Phys. Med. Biol. 64 105009

[129] Price E, Robinson A P, Cullen D M, Tipping J, Calvert N, Hamilton D, Oldfield C, Page E, Pietras B and Smith A 2019 Improving molecular radiotherapy dosimetry using anthropomorphic calibration Phys. Med. 58 40–6

[130] He Y et al 2019 3D-printed breast phantom for multi-purpose and multi-modality imaging Quant. Imaging Med. Surg. 9 63–74

[131] Wood S, Martins T and Ibrahim T S 2019 How to design and construct a 3D-printed human head phantom J. 3D Print. Med. 3 119–25

[132] Grehn M, Stille M, Ziemann C, Cremers F, Rades D and Buzug T M 2019 A new phantom for individual verification of the dose distribution in precision radiotherapy for headand- neck cancer Anticancer Res. 39 6931–8

[133] Lancellotta V et al 2019 Individual 3-dimensional printed mold for treating hard palate carcinoma with brachytherapy: a clinical report J. Prosthetic Dentistry 121 690–3

[134] Casey S, Bahl G and Awotwi-Pratt J B 2019 High dose rate 192-Ir-brachytherapy for basal cell carcinoma of the skin using a 3D printed surface mold Cureus 11 e4913–4913

[135] Bassi S, Langan B and Malone C 2019 Dosimetry assessment of patient-specific 3D printable materials for HDR surface brachytherapy Phys. Med. 67 166–75

[136] Park S-Y, Kang S, Park J M, An H J, Oh D H and Kim J-I 2019 Development and dosimetric assessment of a patientspecific elastic skin applicator for high-dose-rate brachytherapy Brachytherapy 18 224–32

[137] Chmura J, Erdman A, Ehler E, Lawrence J, Wilke C T, Rogers B and Ferreira C 2019 Novel design and development of a 3D-printed conformal superficial brachytherapy device for the treatment of non-melanoma skin cancer and keloids 3D Print. Med. 5 10

[138] D’Alimonte L, Ravi A, Helou J, Morrison D, Mendez L C, Easton H and Morton G 2019 Optimized penile surface mold brachytherapy using latest stereolithography techniques: a single-institution experience Brachytherapy 18 348–52

[139] Imber B S, Wolden S L, Stambuk H E, Matros E, Wexler L H, Drew A S, Rosen E B, Ganly I, Cohen G A N and Damato A L 2019 Novel intraoperative radiotherapy utilizing prefabricated custom threedimensionally printed high-dose-rate applicators Brachytherapy 18 277–84

[140] Zhao Z, Tang X, Mao Z and Zhao H 2019 The design of an individualized cylindrical vaginal applicator with oblique guide holes using 3D modeling and printing technologies J. Contemp. Brachyther. 11 479–87

[141] Taggar A, Barnes E, Martell K, Ahmed B, Paudel M and Ravi A 2019 3D printed individually customized high-doserate brachytherapy applicator for treatment of chronic digital psoriasis Brachytherapy 18 S22

[142] Hodgdon T et al 2018 Logistics of three-dimensional printing: primer for radiologists Acad. Radiol. 25 40–51

[143] Ballard D H et al 2018 Clinical applications of 3D printing: primer for radiologists Acad. Radiol. 25 52–65

[144] Frazer J 2002 Creative design and the generative evolutionary paradigm Creative Evolutionary Systems (Amsterdam: Elsevier) pp 253–74

[145] Leary M (ed) 2019 Design for Additive Manufacturing 1st edn (Sydney: Elsevier) p 358

[146] Au A K, Lee W and Folch A 2014 Mail-order microfluidics: evaluation of stereolithography for the production of microfluidic devices Lab. Chip. 14 1294–301

[147] Wood S, Krishnamurthy N, Santini T, Raval S, Farhat N, Holmes J A and Ibrahim T S 2017 Design and fabrication of a realistic anthropomorphic heterogeneous head phantom for MR purposes PLoS One 12 e0183168

[148] Brunelle M, Ferralli I, Whitsitt R and Medicus K 2017 Current use and potential of additive manufacturing for optical applications Proc. SPIE 10448 104480P

[149] Van der Veen A C, Coenders J, Veer F, Nijsse R, Houtman R and Schonwalder J 2015 The structural feasibility of 3D-printing houses using printable polymers Proc. Int. Association for Shell and Spatial Structures (IASS) Symp. Future Visions (Amsterdam, The Netherlands, 17–20 August 2015)

[150] Skylar-Scott M A, Mueller J, Visser C W and Lewis J A 2019 Voxelated soft matter via multimaterial multinozzle 3D printing Nature 575 330–5

[151] Soultanidis G et al 2019 Development of an anatomically correct mouse phantom for dosimetry measurement in small animal radiotherapy research Phys. Med. Biol. 64 12NT02

[152] Bader C, Kolb D, Weaver J C, Sharma S, Hosny A, Costa J and Oxman N 2018 Making data matter: voxel printing for the digital fabrication of data across scales and domains Sci. Adv. 4 eaas8652

[153] Hosny A et al 2018 From improved diagnostics to presurgical planning: high-resolution functionally graded multimaterial 3D printing of biomedical tomographic data sets 3D Print. Additive Manuf. 5 103–13

[154] Stratasys 2019 J750TM Digital AnatomyTM 3D Printer (https://stratasys.com/3d-printers/j750-digital-anatomy) (Accessed: 8 September 2019)

[155] Keall P J, Mageras G S, Balter J M, Emery R S, Forster K M, Jiang S B, Kapatoes J M, Low D A, Murphy M J and Murray B R 2006 The management of respiratory motion in radiation oncology report of AAPM Task Group 76 a Med. Phys. 33 3874–900

[156] Brock K K, Mutic S, McNutt T R, Li H and Kessler M L 2017 Use of image registration and fusion algorithms and techniques in radiotherapy: report of the AAPM radiation therapy committee task group No. 132 Med. Phys. 44 e43–76

[157] Aerts H J et al 2014 Decoding tumour phenotype by noninvasive imaging using a quantitative radiomics approach Nat. Commun. 5 4006

[158] Kumar V et al 2012 Radiomics: the process and the challenges Magn. Reson. Imaging 30 1234–48

[159] Sanduleanu S,Woodruff H C, de Jong E E C, van Timmeren J E, Jochems A, Dubois L and Lambin P 2018 Tracking tumor biology with radiomics: a systematic review utilizing a radiomics quality score Radiother. Oncol. 127 349–60

[160] van Timmeren J E, Leijenaar R T H, van Elmpt W, Reymen B, Oberije C, Monshouwer R, Bussink J, Brink C, Hansen O and Lambin P 2017 Survival prediction of nonsmall cell lung cancer patients using radiomics analyses of cone-beam CT images Radiother. Oncol. 123 363–9

[161] Larue R et al 2018 Pre-treatment CT radiomics to predict 3-year overall survival following chemoradiotherapy of esophageal cancer Acta Oncol. 57 1475–81

[162] Traverso A, Wee L, Dekker A and Gillies R 2018 Repeatability and reproducibility of radiomic features: a systematic review Int. J. Radiat. Oncol. Biol. Phys. 102 1143–58

[163] Plautz T E, Zheng C, Noid G and Li X A 2019 Time stability of delta-radiomics features and the impact on patient analysis in longitudinal CT images Med. Phys. 46 1663–76

[164] NIH 3D Print Exchange 2019 A collection of biomedical 3D printable files and 3D printing resources supported by the National Institutes of Health (NIH) (https://3dprint.nih. gov/) (Accessed: 8 September 2019)

[165] RSNA 2019 RSNA and ACR to Collaborate on Landmark Medical 3D Printing Registry (https://rsna.org/en/news/ 2019/August/3D-Printing-Registry) (Accessed: 5 October 2019)

[166] Ehler E, Craft D and Rong Y 2018 3D printing technology will eventually eliminate the need of purchasing commercial phantoms for clinical medical physics QA procedures J. Appl. Clin. Med. Phys. 19 8–12

[167] IEEE 2011 IEEE Guide—Adoption of the Project Management Institute (PMI?) Standard 4th edn A Guide to the Project Management Body of Knowledge (PMBOK? Guide) pp 39–47

[168] Sigaux N, Pourchet L, Breton P, Brosset S, Louvrier A and Marquette C A 2019 3D Bioprinting:principles, fantasies and prospects J. Stomatol., Oral Maxillofacial Surg. 120 128–32