[1] Singhal G,Subbarao P M V,Rajesh R,et al.Realization of an advanced nozzle concept for compact chemical oxygen iodine laser[J].Optics and Laser Technology,2007,39(3):577.

[2] Mirels H,Hofland R,King W S.Simplified model of CW diffusion-type chemical laser[J].AIAA Journal,1973,11(2):156-164.

[3] 黄华,姜宗福.压力恢复系统引射器工作效率工作估算[J].国防科技大学学报,2001,23(3):35-39.(Huang H,Jiang Z F.Study on ejector efficiency engineering calculation in pressure recovery system.Journal of National University of Defense Technology,2001,23(3):35-39)

[4] Matsuo K,Sasaguchi K,Tasaki K,et al.Investigation of supersonic air ejectors (part 1.performance in the case of zero-secondary flow)[J].Bulletin of the JSME,1981,24(198):2090-2097.

[5] 张鲲鹏,薛飞,潘卫明,等.高压气体引射器的试验研究和仿真[J].热科学与技术,2004,3(2):133-138.(Zhang K P,Xue F,Pan W M,et al.Experimental investigation and numerical simulation of high-pressure gas ejector.Journal of Thermal Science and Technology,2004,3(2):133-138)

[6] 徐万武,邹建军,王振国,等.超声速环型引射器启动特性试验研究[J].火箭推进,2005,31(6):7-11.(Xu W W,Zou J J,Wang Z G,et al.Experimental investigation of the start performances of the supersonic annular ejector.Journal of Rocket Propulsion,2005,31(6):7-11)

[7] Stephens S E,Bates L B.Effect of geometric parameters on the performance of second throat annular steam ejectors[R].TN:Arnold Engineering Development Center,Arnold Air Force Station.1991.

[8] Kim S,Kwon S.Experimental determination of geometric parameters for an annular injection type supersonic ejector[J].Journal of Fluids Engineering-Transactions of the ASME,2006,128:1164-1171.

[9] 凌其扬,廖达雄.风洞引射器试验研究[J].气动实验与测量控制,1994,8(2):10-18.(Ling Q Y,Liao D X.Experimental investigation on wind tunnel ejector.Aerodynamical Experiment and Instrument Control,1994,8(2):10-18)

[10] 张堃元,徐辉,沈炳炎,等.主流倾斜的引射器试验研究[J].航空动力学报,2000,15(4):439-441,438.(Zhang K Y,Xu H,Shen B Y,et al.Experimental investigation on two-stage ejector model with oblique mainstream.Journal of Aerospace Power,2000,15(4):439-441,438)

[11] 廖达雄,任泽斌,余永生,等.等压混合引射器设计与实验研究[J].强激光与粒子束,2006,18(5):728-732.(Liao D X,Ren Z B,Yu Y S,et al.Design and experiment of constant pressure mixing ejector.High Power Laser and Particle Beams,2006,18(5):728-732)

[12] Dufflocq M,Benjamin M A,Roan V P,et al.Initial development of the axisymmetric ejector shear layer[C]//AIAA,SAE,ASME,and ASEE,Joint Propulsion Conference and Exhibit.1992:13.

[13] German R C,Bauer R C.Effects of diffuser length on the performance of ejectors without induced flow[R].AEDC-TN-61-89.1961.

[14] Sullins G,McLaffertyu G H.Experimental results of shock trains in rectangular ducts[R].AIAA-92-5103,1992.

[15] Desevaux P,Hostache G,Jacquet P.Static pressure measurement along the centerline of an induced flow ejector[J].Experiments in Fluids,1994,16(3/4):289-291.