[1] 邾继贵, 于之靖. 视觉测量原理与方法[M]. 北京: 机械工业出版社, 2012.

    Zhu JG, Yu ZJ. Principle of vision metrology[M]. Beijing: China Machine Press, 2012.

[2] 尹仕斌, 任永杰, 刘涛, 等. 机器视觉技术在现代汽车制造中的应用综述[J]. 光学学报, 2018, 38(8): 0815001.

    Yin S B, Ren Y J, Liu T, et al. Review on application of machine vision in modern automobile manufacturing[J]. Acta Optica Sinica, 2018, 38(8): 0815001.

[3] Zhang S. Recent progresses on real-time 3D shape measurement using digital fringe projection techniques[J]. Optics and Lasers in Engineering, 2010, 48(2): 149-158.

[4] 周富强, 张广军, 江洁. 空间圆几何参数的非接触高精度测量方法[J]. 仪器仪表学报, 2004, 25(5): 604-607.

    Zhou F Q, Zhang G J, Jiang J. High accurate non-contact method for measuring geometric parameters of spatial circle[J]. Chinese Journal of Scientific Instrument, 2004, 25(5): 604-607.

[5] Koninckx T P, Van Gool L. Real-time range acquisition by adaptive structured light[J]. IEEE Transactions on Pattern Analysis and Machine Intelligence, 2006, 28(3): 432-445.

[6] 吴燕城. 基于线结构光三维测量关键技术研究[D]. 秦皇岛: 燕山大学, 2019: 1- 8.

    Wu YC. Research on key technologies of three-dimensional measurement based on line structure light[D]. Qinhuangdao: Yanshan University, 2019: 1- 8.

[7] 薛婷, 孙梅, 张涛, 等. 线结构光视觉传感器测圆(类圆)孔中心两步法[J]. 机械工程学报, 2008, 44(10): 206-209.

    Xue T, Sun M, Zhang T, et al. Two-step method for measuring center coordinates of spatial hole based on the structured light stripe vision sensor[J]. Chinese Journal of Mechanical Engineering, 2008, 44(10): 206-209.

[8] 薛婷, 吴斌, 张涛, 等. 基于线结构光视觉传感器的圆孔定位误差分析[J]. 光学精密工程, 2008, 16(4): 624-629.

    Xue T, Wu B, Zhang T, et al. Analysis on round-hole orientation error based on structured light stripe vision sensor[J]. Optics and Precision Engineering, 2008, 16(4): 624-629.

[9] Yu H T, Huang Y, Zheng D L, et al. Three-dimensional shape measurement technique for large-scale objects based on line structured light combined with industrial robot[J]. Optik, 2020, 202: 163656.

[10] Wei ZZ, XieM, Zhang GJ. Calibration method for line structured light vision sensor based on vanish points and lines[C]//2010 20th International Conference on Pattern Recognition. 23-26 Aug. 2010, Istanbul, Turkey.New York: IEEE Press, 2010: 794- 797.

[11] 陈状, 胡永祥, 郝晗. 基于3D视觉的线结构光测量算法[J]. 现代信息科技, 2019( 22): 33- 35.

    ChenZ, Hu YX, HaoH. Line structured light measurement algorithm based on 3D vision[J]. Modern Information Technology, 2019( 22): 33- 35.

[12] Safaee-RadR, Smith KC, BenhabibB, et al.An analytical method for the 3D-location estimation of circular features for an active-vision system[C]//1990 IEEE International Conference on Systems. 4-7 Nov. 1990, Los Angeles, CA, USA.New York: IEEE Press, 1990: 215- 220.

[13] Wu H Y, Chen Q, Wada T. Homography from conic intersection: camera calibration based on arbitrary circular patterns[J]. IPSJ Transactions on Computer Vision and Image Media, 2003, 139(2): 9-16.

[14] 李玥华, 刘朋, 周京博, 等. 基于BP神经网络的结构光光条中心提取[J]. 光学学报, 2019, 39(12): 1212005.

    Li Y H, Liu P, Zhou J B, et al. Center extraction of structured light stripe based on back propagation neural network[J]. Acta Optica Sinica, 2019, 39(12): 1212005.

[15] Steger C. An unbiased detector of curvilinear structures[J]. IEEE Transactions on Pattern Analysis and Machine Intelligence, 1998, 20(2): 113-125.

[16] 周京博, 李玥华, 秦志英, 等. 基于参考靶标的线结构光传感器标定[J]. 光学学报, 2019, 39(4): 0412005.

    Zhou J B, Li Y H, Qin Z Y, et al. Calibration of line structured light sensor based on reference target[J]. Acta Optica Sinica, 2019, 39(4): 0412005.

[17] 陈天飞, 赵吉宾, 吴翔. 基于共面靶标的线结构光传感器标定新方法[J]. 光学学报, 2015, 35(1): 0112004.

    Chen T F, Zhao J B, Wu X. New calibration method for line structured light sensor based on planar target[J]. Acta Optica Sinica, 2015, 35(1): 0112004.