[1] . C. Stuart, M. D. Feit, S. Herman et al.. Optical ablation by high-power short-pulse lasers[J]. J. Optical Society of America B, 1996, 13(2): 459-468.

[2] . Liu, D. Du, G. Mourou. Laser ablation and micromachining with ultrashort laser pulses[J]. IEEE J. Quantum Electron., 1997, 33(10): 1706-1716.

[3] . M. Davis, K. Miura, N. Sugimoto et al.. Writing waveguides in glass with a femtosecond laser[J]. Opt. Lett., 1996, 21(21): 1729-1731.

[4] . N. Glezer, M. MIlosavljevic, L. Huang et al.. Three-dimensional optical storage inside transparent materials[J]. Opt. Lett., 1996, 21(24): 2023-2025.

[5] . Marcinkevicius, S. Juodkazis, M. Watanabe et al.. Femtosecond laser-assisted three-dimensional microfabrication in silica[J]. Opt. Lett., 2001, 26(5): 277-279.

[6] C. Hnatovsky, R. S. Taylor, E. Simova et al.. Fabrication of microchannels in glass using focused femtosecond laser radiation and selective chemical etching[J]. Applied Physics A:Materials Science & Processing, 2006, 84(1～2):47～61

[7] He Fei, Cheng Ya. Femtosecond laser micromachining: frontier in laser precision micromachining[J]. Chin. J. Lasers, 2007, 34(5):595～622
何飞, 程亚. 飞秒激光微加工:激光精密加工领域的新前沿[J]. 中国激光, 2007, 34(5):595～622

[8] Yinzhong Wu, Ching-yue Wang, Wei Jia et al.. Influence of scanning velocity on femtosecond laser direct writing lines on FOTURAN glass[J]. Chin. Opt. Lett., 2008, 6(1):51～53

[9] . M. Kowalevicz, V. Sharma, E. P. Ippen et al.. Three-dimensional photonic devices fabricated in glass by use of a femtosecond laser oscillator[J]. Opt. Lett., 2005, 30(9): 1060-1062.

[10] . Wang, K. Sugioka, Y. Hanada et al.. Optical waveguide fabrication and integration with a micro-mirror inside photosensitive glass by femtosecond laser direct writing[J]. Applied Physics A: Materials Science & Processing, 2007, 88(4): 699-704.

[11] . Taccheo, G. D. Valle, R. Osellame et al.. Er∶Yb-doped waveguide laser fabricated by femtosecond laser pulses[J]. Opt. Lett., 2004, 29(22): 2626-2628.

[12] . J. Mihailov, C. W. Smelser, P. Lu et al.. Fiber Bragg gratings made with a phase mask and 800-nm femtosecond radiation[J]. Opt. Lett., 2003, 28(12): 995-997.

[13] . Sugioka, C. Ya, K. Midorikawa et al.. Three-dimensional micromachining of glass using femtosecond laser for lab-on-a-chip device manufacture[J]. Applied Physics A: Materials Science & Processing, 2005, 81(1): 1-10.

[14] . Takeshima, Y. Narita, T. Nagata et al.. Fabrication of photonic crystals in ZnS-doped glass[J]. Opt. Lett., 2005, 30(5): 537-539.

[15] Liu Bowen, Hu Minglie, Song Youjian et al.. 39 fs, 16 W all photonic crystal fiber laser system[J]. Chin. J. Lasers, 2008, 35(6):811～814
刘博文, 胡明列, 宋有建 等. 39 fs, 16 W全光子晶体光纤飞秒激光放大系统[J]. 中国激光, 2008, 35(6):811～814

[16] . . Large mode area photonic crystal fiber laser output high average power femtosecond pulses[J]. Chin. J. Lasers, 2007, 34(12): 1603-1606.

[17] . Minoshima, A. W. Kowalevicz, I. Hartl et al.. Photonic device fabrication in glass by use of nonlinear materials processing with a femtosecond laser oscillator[J]. Opt. Lett., 2001, 26(19): 1516-1518.