[1] . . A characterization of thick-film PTC resistors[J]. Sensors and Actuators A, 2005, 117: 256-266.

[2] 季凌飞, 杜新宇, 付宗义 等. 多种功能陶瓷的激光烧结技术[J]. 中国激光, 2007, 34(s1): 31～35

    Ji Lingfei, Du Xinyu, Fu Zongyi et al.. Laser sintering technique for functional ceramics [J]. Chinese J. Lasers, 2007, 34(s1): 31～35

[3] 付宗义, 季凌飞, 蒋毅坚. 激光烧结锆钛酸钡压电陶瓷[J]. 中国激光, 2007, 34(s1): 125～127

    Fu Zongyi, Ji Lingfei, Jiang Yijian. Laser sintering of Ba(Ti0.95Zr0.05)O3 piezoelectric ceramics [J]. Chinese. J. Lasers, 2007, 34(s1): 125～127

[4] . Chung, S.Ko. Damage-free low temperature pulsed laser printing of gold nanoinks on polymers[J]. ASME J. Heat Transfer, 2005, 127: 724-732.

[5] Edward Kinzel, Hjalti Sigmarsson, Xianfan Xu et al.. Selective laser sintering of microwave components[C]. Proceedings of International Symposium on Microelectronics, International Microelectronics and Packaging Society(IMAPS), Philadelphia, USA, 2005, 691～699

[6] 李祥友， 祁小敬， 曾晓雁. 玻璃基板激光微细熔覆柔性布线技术研究[J]. 中国激光，2005，32(5):713～717

    Li Xiangyou, Qi Xiaojing, Zeng Xiaoyan. Study of conductor fabrication by laser micro-cladding electronic pastes on glass substrate [J]. Chinese J. Lasers, 2005, 32(5):713～717

[7] 李慧玲， 曾晓雁. 搭接量对激光微细熔覆柔性直写厚膜电阻组织性能的影响[J]. 中国激光，2005，32(11):1554～1560

    Li Huiling, Zeng Xiaoyan. Effect of overlapped spaces on structure property of thick-film resistors flexibly and directly fabricated by laser micro-cladding [J]. Chinese J. Lasers, 2005, 32(11):1554～1560

[8] . 激光微细熔覆快速原型制造厚膜电感元件[J]. 电子元件与材料, 2006, 25(8): 46-49.

    . Study on thick film inductors fabricated by laser micro-cladding and rapid prototype[J]. Electronic Components & Materials, 2006, 25(8): 46-49.

[9] 王少飞， 曹宇， 王小宝 等. 激光微细熔覆快速制造微加热器阵列[J]. 中国激光，2007，34(11):1567～1570

    Wang Shaofei, Cao Yu, Wang Xiaobao et al.. Microheater array fabrication by laser micro-cladding method [J]. Chinese J. Lasers, 2007, 34(11):1567～1570

[10] 代青龙, 王小宝, 蔡志祥 等. 激光微熔覆法制备空芯薄膜电感的研究[J]. 中国激光, 2007, 34(s1): 231～234

    Dai Qinglong, Wang Xiaobao, Cai Zhixiang et al.. Study of thin film inductor with air core fabricated by laser micro-cladding method [J]. Chinese J. Lasers, 2007, 34(s1):231～234

[11] 李祥友， 蔡志祥， 曹宇 等. 基于微细笔和激光微熔覆的设备研制[J]. 应用激光, 2007，27(2):81～84

    Li Xiangyou, Cai Zhixiang, Cao Yu et al.. Equipment manufacture based on laser micro-cladding & micropen[J]. Applied Laser, 2007, 27(2):81～84