镍硅硼合金粉末激光熔覆中熔池光谱检测分析
顾振杰, 雷剑波, 张传鹏, 王云山. 镍硅硼合金粉末激光熔覆中熔池光谱检测分析[J]. 中国激光, 2014, 41(11): 1103009.
Gu Zhenjie, Lei Jianbo, Zhang Chuanpeng, Wang Yunshan. Detection and Analysis of Spectrum Distribution of Laser Molten Pool in Nickel Silicon Boron Alloy Powder Laser Cladding[J]. Chinese Journal of Lasers, 2014, 41(11): 1103009.
[1] 朱天柱. 压电式喷射三维打印成型系统开发与实验研究[D]. 武汉: 华中科技大学, 2012. 1-11.
Zhu Tianzhu. Development of Three Dimensional Printing System Using Piezoelectric Inkjet Technology and Its Experimental Study[D]. Wuhan: Huazhong University of Science and Technology, 2012. 1-11.
[2] Scalfani, V F Josh Sahib. A model for managing 3D printing services in academic libraries[J]. Issues in Science & Technology Librarianship, 2013, 72: 1-8.
[3] Feifei Yan, Yuanyuan Liu, Haying Chen, et al.. A multi-scale controlled tissue engineering scaffold prepared by 3D printing and NFES technology[J]. AIP Advances, 2014, 4(3): 031321.
[4] 孙道金, 刘继常, 李钦栋. 激光熔覆纯镍熔池底部组织生长的相场法模拟[J]. 中国激光, 2013, 40(4): 0403005.
[5] 孟庆武, 耿林, 祝文卉, 等. 反应放热激光熔覆过程中的熔池状态分析[J]. 应用激光, 2009, 29(4): 282-285.
[6] O B Kovalev, A M Gurin. Multivortex convection of metal in molten pool with dispersed impurityinduced by laser radiation[J]. International Journal of Heat and Mass Transfer, 2014, 68: 269-277.
[7] D Beckmann, D Schnitzler, D Schaefor, et al.. Beam shaping of laser diode radiation by waveguides with arbitrary cladding geometry written with fs-laser radiation[J]. Optics Express, 2011, 19(25): 25418-25425.
[8] 王霄, 薛国春, 李品, 等. 激光透射连接硅与玻璃熔池研究[J]. 中国激光, 2013, 40(6): 0603007.
[9] 赵海玲. 激光熔覆熔池温度场和流场的数值模拟[D]. 秦皇岛: 燕山大学, 2013. 19-40.
Zhao Hailing. Numerical Simulation of Temperature Field and Flow Field during Laser Cladding of Molten Pool[D]. Qinhuangdao: Yanshan University, 2013. 19-40.
[10] 陈静, 张凤英, 谭华, 等. 激光多层熔覆沉积预混合Ti-xAl-yV合金粉末在熔池中的熔化与偏析行为[J]. 中国激光, 2010, 37(8): 2154-2159.
[11] 雷剑波, 杨洗陈, 陈娟, 等. 激光熔覆熔池表面温度场分布的检测[J]. 中国激光, 2008, 35(10): 1605-1608.
[12] 杨洗陈, 栗丽, 张烨. 激光熔覆中同轴粉末流温度场的数值模拟[J]. 光学学报, 2009, 29(11): 3114-3120.
[13] 谭华, 陈静, 黄卫东, 等. 激光快速成形过程中熔池形态的演化[J]. 中国激光, 2007, 34(3): 442-446.
[14] 谭华, 张凤英, 黄卫东, 等. 激光立体成形粉末流输送的数值模拟研究[J]. 中国激光, 2011, 38(10): 1003003.
[15] 李媛媛. 同轴送粉式激光熔覆气体粉末流对熔池形貌的影响研究[D]. 长沙: 湖南大学, 2012. 16-22.
Li Yuanyuan. Effect of Gas-Powder Flow on Molten Pool Morphology for Coaxial Powder-Feed Laser Cladding[D]. Changsha: Hunan University, 2012. 16-22.
[16] 胡晓冬, 于成松, 姚建华. 激光熔覆熔池温度监测与控制系统的研究现状[J]. 激光与光电子学进展, 2013, 50(12): 120003.
[17] 洪蕾, 胡肇炜, 马保亮. 激光熔覆熔凝过程等离子体光信号的监测[J]. 中国激光, 2011, 38(2): 0203006.
[18] 辛成运, 程晓舫, 张忠政. 基于光谱响应定标的辐射测温方法[J]. 光谱学与光谱分析, 2012, 32(10): 2735-2738.
[19] Xiaohui Li, Benjamin W Smith, Nicoló Omenetto, et al.. Relative spectral response calibration of a spectrometer system for laser induced breakdown spectroscopy using the argon branching ratio method[J]. Journal of Analytical Atomic Spectrometry, 2014, 29(4): 657-664.
顾振杰, 雷剑波, 张传鹏, 王云山. 镍硅硼合金粉末激光熔覆中熔池光谱检测分析[J]. 中国激光, 2014, 41(11): 1103009. Gu Zhenjie, Lei Jianbo, Zhang Chuanpeng, Wang Yunshan. Detection and Analysis of Spectrum Distribution of Laser Molten Pool in Nickel Silicon Boron Alloy Powder Laser Cladding[J]. Chinese Journal of Lasers, 2014, 41(11): 1103009.