[1] 常虹. 透射式红外系统光学稳定性关键技术研究[D]. 哈尔滨: 哈尔滨工业大学, 2011.

    CHANG Hong. Research on Key Techniques of Thermo-optical Stability for Refractive Infrared System[D]. Harbin: Harbin Institute of Technology,2011.

[2] David N, Jacobson Max N, Larry C, et al. Design of a large lightweight space telescope optical system for the next generation space telescope[C]//SPIE, 1998, 3356: 74-88.

[3] LI Fu, RUAN Ping, MA Xiaolong, et al. Methods of opto-mechanical analysis with Zernike polynomials[J]. Journal of Applied Optics, 2007,28(1): 38-42.

[4] Jacob M Miller, Marcus R Hatch. Integrated thermal/structural/optical evaluations of a spinning cryogenic infrared sensor undergoing thermal/mechanical distortions[J]//SPIE, 1978: 146-155(DOI: 10.1117/12. 955770).

[5] Tadeusz Kryszczynski, Marcin Lesniewski. Material problem in athermalization of optical systems[J]. Optical Engineering, 1997, 36(6):1596-1601

[6] Williams A L, Genberg V L, Gracewski S M, et al. Simultaneous design optimization of optomechanical systems[C]//SPIE, 1999, 3786: 236-247.

[7] Myung Cho. Opto-mechanical design of a beam launch telescope[C]//SPIE, 2005, 5877: 58770I.

[8] Segato Elisa, Vania Da Deppo, Stefano Debei, et al. Method for studying the effects of thermal deformations on optical systems for space application[J]. Applied Optics, 2011, 50(18): 2836-2845.

[9] 王克军. 天基大口径反射镜轻量化设计及复合支撑技术研究[D]. 长春: 中国科学院长春光学精密机械与物理研究所, 2016.

    WANG Kejun. Research on the Lightweight Design and Compound Support of the Large-aperture Mirror for Space-based Telescope[D].Changchun: Changchun Institute of Optics, Fine Mechanics and Physics,Chinese Academy of Sciences, 2016.

[10] 朱能兵. 轻量化反射镜支撑结构设计研究[D]. 成都: 中国科学院光电技术研究所, 2017.

    ZHU Nengbing. Research on the design of the supporting structure of light weight mirror[D]. Chengdu: Institute of Optoelectronic Technology,Chinese Academy of Sciences, 2017.

[11] 范磊. 2m 级地基望远镜SiC 主镜轻量化设计及支撑技术研究[D]. 长春: 中国科学院长春光学精密机械与物理研究所, 2013.

    FAN Lei. Research on the Lightweight Design and Support of the 2 m-SiC Primary Mirror for Ground-based Telescope[D]. Changchun:Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, 2013.

[12] 傅丹鹰, 殷纯勇, 乌崇德. 空间遥感器的热/结构/光学分析研究[J].宇航学报, 2001, 22(3): 105-110.

    FU Danying, YIN Chunyong, WU Chongde. A study of thermal/structural/optical analysis of a space remote sensor[J]. Journal of Astronautics, 2001, 22(3): 105-110.

[13] 黎明, 吴清文, 江帆. 三线阵立体测绘相机热控系统的设计[J]. 光学精密工程, 2010, 18(6): 1368-1372.

    LI Ming, WU Qingwen, JIANG Fan. Design of thermal control system for three-linear array mapping cameras[J]. Optics and Precision Engineering, 2010, 18(6): 1368-1372.

[14] 訾克明, 吴清文, 李泽学, 等. 空间光学遥感器的热设计实例及其仿真分析[J]. 计算仿真, 2008, 25(12): 77-80.

    ZI Keming, WU Qingwen, LI Zexue, et al. Simulation analysis of a space optical remote-sensor’s thermal design[J]. Computational Simulation, 2008, 25(12): 77-80.

[15] 陈荣利, 马臻, 杨文刚, 等.空间相机热光学分析与试验验证[J]. 光子学报, 2010, 39(11): 2068-2072.

    CHEN Rongli, MA Zhen, YANG Wenfang, et al. Thermal-optical analysis and test for high resolution space camera[J]. Photonics Journal,2010, 39(11): 2068-2072.

[16] 姬文晨. 红外镜头的光机热集成分析方法的研究[D]. 昆明: 昆明理工大学, 2016.

    JI Wenchen. The Research of Integrated Optical-structural-thermal Analysis Method of Infrared Lens[D]. Kunming: Kunming University of Science and Technology, 2016.

[17] 朱峰. 基于光机热集成的机械被动式消热差红外镜头设计[D]. 昆明:昆明理工大学, 2017.

    ZHU Feng. The Design of Mechanical Passive Athermal Infrared Lens based on the Structural-thermal-optical Integrated Analysis[D].Kunming: Kunming University of Science and Technology, 2017.

[18] 乔亚天. 梯度折射率光学[M]. 北京: 科学出版社, 1991.

    QIAO Yatian. Gradient Index Optics[M]. Beijing: Science Press, 1991.

[19] 宋席发. 光机热一体化研究及成像分析[D]. 北京: 北京理工大学,2015.

    SONG Xifa. Integrated research on opto-thermal analysis and imaging analysis[D] . Beijing: Beijing Institute of Technology, 2015.

[20] 许京荆. Ansys Workbench 工程实例详解[M]. 北京: 人民邮电出版社, 2015.

    XU Jingjn. Ansys Workbench Project Examples Explain[M]. Beijing:People's Posts and Telecommunications Press, 2015.

[21] 李志忠, 赵振宇. 齿轮箱螺栓结合面的有限元建模研究[J]. 机电工程,2014, 31(6): 734-739.

    LI Zhizhong, ZHAO Zhenyu. Research on finite element modeling of gearbox bolted joint surface[J]. Mechanical and Electrical Engineering,2014, 31(6): 734-739.

[22] 冷骏. 螺栓预紧力的加载方法研究[J]. 机电设备, 2013(2): 32-35.

    LENG Jun. The loading approaches of bolt pre-tightening force[J].Mechanical and Electrical Equipment, 2013(2): 32-35.

[23] 陈义东. 利用Ansys Workbench 对螺栓组件进行应力分析[J]. 机械工程师, 2013(3): 80-81.

    CHEN Yidong. Stress analysis of bolt assemblies with Ansys Workbench[J]. Mechanical Engineer, 2013(3): 80-81.

[24] Doyle K B, Genberg V L. Integrated Optomechanical Analysis[M].Washington: Publication of SPIE, 2002.

[25] 陈永聪. 基于有限元法的大口径平行光管主反射镜支撑技术研究[D].西安: 中国科学院西安光学精密机械研究所, 2007.

    CHEN Yongcong. Research on Supporting Technology of Main Mirror of Large Diameter Parallel Light Pipe Based on Finite Element Method[D]. Xi'an: Xi'an Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, 2007.

[26] Marckmann G, Verron E. A theory of network alteration for the Mullins effect[J]. Journal of the Mechanics and Physics of Solids, 2002, 50:2011-2028.

[27] Rivlin R S. Large elastic deformation of isotropic materials: I.Fundamental concepts, II. Some uniqueness theories for pure homogeneous deformation[J]. Philos. Trans. Roy. Soc. Lond. Ser. A,1948, 240: 459-508.

[28] Mooney R. A theory of large elastic deformation[J]. J. Appl. Phys.,1940(11): 582-592.

[29] 王勖成, 邵敏. 有限单元法基本原理和数值方法[M]. 北京: 清华大学出版社, 1997.

    WANG Xucheng, SHAO Min. Basic Principle and Numerical Method of Finite Element Method[M]. Beijing: Tsinghua University Press, 1997.

[30] 张洪伟. ANSYS 非线性有限元分析方法及范例应用[M]. 北京: 水利水电出版社, 2013.

    ZHANG Hongwei. ANSYS Nonlinear Finite Element Analysis Method and Sample Application[M]. Beijing: Water Resources and Hydropower Press, 2013.

[31] 夏卫明, 骆桂林. 橡胶结构有限元分析收敛问题的对策[J]. 机械设计与制造, 2013(7): 265-268.

    XIA Weiming, LUO Guixiang. The countermeasures for the convergence problem of finite element analysis of rubber structures[J]. Mechanical Design and Manufacturing, 2013(7): 265-268.