光学学报, 1985, 5 (2): 170, 网络出版: 2011-09-16
多模梯度石英光纤拉丝、涂复技术及对光、力学性能的影响
Drawing and coating techniques of multi-mode grade silica optical fiber
摘要
本文描述了多模梯度石英光纤的拉丝、涂杂技术及其对光纤性能影响,对于GeO2-P2O5-SiO2三元系采用该技术可望获得强度~100kpsi,0.85μm损耗~2.5db/km,1.30μm损耗~0.7db/km,丝径125±3μm的涂复均匀、同心度良好的一次涂复光纤。文后列有一批反映工艺重复性的数据。
Abstract
Drawing and coating techniques of multi-mode graded-index silica optical fiber and their influences on the optical, mechanical properties are described. High-quality optical fibers with short wavelength loss (at 0.85μm)~2.5db/km, long wavelenth loss (at 1.8μ/m)~0.7db/km, strength ~100kpsi, fiber diameter 125±8μm and good coating concentricity may be fabricated by this technique for ternary system of GeO2-P2O5-SiO2. In addition, technological repeat was identified by some of the new data given in the end of this paper.
王建国, 陈惠民, 秦晨. 多模梯度石英光纤拉丝、涂复技术及对光、力学性能的影响[J]. 光学学报, 1985, 5(2): 170. WANG JIANGUO, CHEN HUIMIN, QIN CHEN. Drawing and coating techniques of multi-mode grade silica optical fiber[J]. Acta Optica Sinica, 1985, 5(2): 170.