[1] 王匀,周建忠,戴亚春 等. 微成形技术在塑性加工中的应用研究[J]. 锻压技术, 2004, (6): 81～85

    Wang Yun, Zhou Jianzhong, Dai Yachun et al.. Application of micro-forming technology in plastic processing[J]. Forging & Stamping Technology, 2004, (6): 81～85

[2] . 金属微成形技术[J]. 塑性工程学报, 2006, 10(6): 5-8.

    . . Metal microform technology[J]. J. Plasticity Engineering, 2006, 10(6): 5-8.

[3] A. Kratky, G. Liedl, R. Bielak. Laser assisted deep drawing [J]. Laser Assisted Machining, 2004, (4): 1125～1134

[4] . Ikeuchik, Liao J. Weld. HAZ toughness and its improvement of low alloy steel SQV-2A for pressure vessels[J]. Transactions of Joining and Welding Research Institute, 1993, 22(2): 215-221.

[5] . Netal. Cleavage fracture model for granular bainite in simulated coarse-grained heat-affected zones of high-strength low-alloyed steels[J]. JSME International J. Series, 1997, 40(2): 179-188.

[6] 石经纬, 李俐群, 陈彦宾 等. 不同激光热源模式下薄板弯曲特性数值模拟[J]. 中国激光, 2007, 34(9): 1303～1307

    Shi Jingwei, Li Liqun, Chen Yanbin et al.. Numerical simulation of bending properties for sheet metal with different laser source modes[J]. Chin. J. Lasers, 2007, 34(9): 1303～1307

[7] 王秀凤, 陈光南, 胡世光 等. 激光点热源作用下动态微变形的数值模拟与校验[J]. 中国激光, 2004, 31(12): 1518～1522

    Wang Xiufeng, Chen Guangnan, Hu Shiguang et al.. Simulation and verification of the dynamic micro-deformation under laser point source[J]. Chin. J. Lasers, 2004, 31(12): 1518～1522

[8] 王扬,谭建国,杨立军. 板材激光加热弯曲成型实验研究[J]. 光电子·激光, 2003, 14(4): 415～418

    Wang Yang, Tan Jianguo, Yang Lijun. The experimental study on laser bending of sheet metal[J]. J. Optoelectronics·Laser, 2003, 14(4): 415～418

[9] 刘顺发, 陈洪斌. 激光加热物体的三维模型计算[J]. 光子学报, 2000, 29(3): 267～270

    Liu Shunfa, Cheng Hongbin. Calculating the temperaturefield of 3-D object heated by laser[J]. Acta Photonica Sinica, 2000, 29(3): 267～270

[10] 许国良,王晓墨. 工程传热学[M]. 北京: 中国电力出版社, 2005. 236～237

    Xu Guoliang, Wang Xiaomo. Engineering Heat Transfer[M]. Beijing: China Electric Power Press, 2005. 236～237

[11] 魏在福,查鸿逵,王润文. 激光加热温度场物理分析[J]. 光学学报, 1994, 14(4): 355～359

    Wei Zaifu, Cha Hongkui, Wang Runwen. Physical analysis of the laser-induced temperature field[J]. Acta Optica Sinica, 1994, 14(4): 355～359

[12] 黄晨光,段祝平. 激光微弯曲成形机理的数值研究[J]. 中国激光, 2002, 29(3): 281～285

    Huang Chenguang, Duan Zhuping. Numerical simulation on the micro-scale bending induced by pulsed laser beam[J]. Chin. J. Lasers, 2002, 29(3): 281～285