基于三维激光扫描的移动大尺寸圆柱体工件长度快速检测系统
周森, 郭永彩, 高潮, 吴小燕. 基于三维激光扫描的移动大尺寸圆柱体工件长度快速检测系统[J]. 光学 精密工程, 2014, 22(6): 1524.
ZHOU Sen, GUO Yong-cai, GAO Chao, WU Xiao-yan. Rapid length measuring system for mobile and large scale cylinder workpieces based on 3D laser scanning[J]. Optics and Precision Engineering, 2014, 22(6): 1524.
[1] DENNIS A S. Length and dimensional measurements at NIST［J］. Journal of Research of the National Institute of Standards and Technology, 2001, 106(1): 1-23.
[2] ESTLER W T, EDMUNDSON K L, PEGGS G N, et al.. Large- scale metrology an update ［J］. CIRP Annals-Manufacturing Technology, 2002, 51(2): 587-609.
[3] 张福民, 曲兴华, 叶声华. 大尺寸测量中多传感器的融合［J］. 光学 精密工程, 2008, 16(7): 1237-1240.
ZHANG F M, QU X H, YE SH H. Multiple sensor fusion in large scale measurement ［J］. Opt. Precision Eng., 2008, 16(7):1237-1240. (in Chinese)
[4] 刘建伟, 梁晋, 梁新合. 大尺寸工业视觉测量系统［J］. 光学 精密工程, 2010, 18(1): 126-134.
[5] WECKENMANN A, ESTLER T, PEGGS G, et al.. Probing systems in dimensional metrology ［J］. CIRP Annals-Manufacturing Technology, 2004, 53(2): 657-684.
[6] 裘祖荣, 石照耀, 李岩. 机械制造领域测量技术的发展研究［J］. 机械工程学报, 2010, 46(14):1-11.
QIU Z R, SHI ZH Y ,LI Y. Research on the development of measurement technology mechanical manufacture ［J］. Mechanical Engineering, 2010, 46(14):1-11. (in Chinese)
[7] LSHEIL A, GONNET J P, JOANNIC D,et al.. Systematic error correction of a 3D laser scanning measurement device ［J］. Optics and Laser in Engineering, 2011, 49:16-24.
[8] ZHAO H B, JEAN P K, NICK V G, et al. Automated dimensional inspection planning using the combination of laser scanner and tactile probe ［J］. Measurement, 2012, 45: 1057-1066.
[9] MAILHE J,LINARES J M. Geometrical checking by virtual gauge, including measurement uncertainties［J］. CIRP Annals-Manufacturing Technology, 2008, 57: 513-516.
[10] ZHU SH P,FANG J CH,ZHOU R. A new noncontact flatness measuring system of large 2-D flat workpiece ［J］. IEEE Transactions on instrumentation and measurement, 2008, 12(57): 2891-2904.
[11] JUNG C L, GAO W, YUKI S, et al.. Precision measurement of carriage slide motion error of a drum roll lathe ［J］. Precision Engineering, 2012, 36: 244-251.
[12] GAO W, SATO SHI KIYONO. High accuracy profile measurement of a machined surface by the combined method ［J］. Measurement, 1996, 19(1):55-64.
[13] EIKI O. Multi-probe method for straightness profile measurement based on least uncertainty propagation (1st report)［J］. Precision Engineering, 2010, 34: 49-54.
[14] NICK V G, STEVEN C, PHILIP B,et al.. A performance evaluation test for laser line scanners on CMMs ［J］. Optics and Laser in Engineering, 2009, 47:336-342.
[15] 刘万里, 曲兴华, 欧阳健飞, 等. 激光跟踪测量系统角度自动校正装置设计［J］. 光学 精密工程, 2008, 16(9):1696-1700.
LIU W L, QU X H, OU YANG J F, et al.. Design of angular automatic calibration mechanism for laser tracker system［J］. Opt. Precision Eng., 2008, 16(9):1696-1700. (in Chinese)
周森, 郭永彩, 高潮, 吴小燕. 基于三维激光扫描的移动大尺寸圆柱体工件长度快速检测系统[J]. 光学 精密工程, 2014, 22(6): 1524. ZHOU Sen, GUO Yong-cai, GAO Chao, WU Xiao-yan. Rapid length measuring system for mobile and large scale cylinder workpieces based on 3D laser scanning[J]. Optics and Precision Engineering, 2014, 22(6): 1524.
PDF全文
