[1] Zhou Shengfeng, Dai Xiaoguang, Zeng Xiaoyan. Effects of processing parameters on structure of Ni-based WC composite coatings during laser induction hybrid rapid cladding［J］. Applied Surface Science, 2009, 255(20):8494-8500.

[2] Huang Fengxiao, Jiang Zhonghao, Liu Ximing, et al. Microstructure and properties of thin wall by laser cladding forming［J］. Journal of Materials Processing Technology, 2010, 256(11):5985-5992.

[3] Amitesh K, Subhransu R. Effect of three-dimensional melt pool convection on process characteristics during laser cladding［J］. Computational Materials Science, 2009, 46(2):495-506.

[4] 张晓伟,刘洪喜,蒋业华,等.激光原位合成TiN/Ti3Al基复合涂层［J］.金属学报, 2011, 47(8):1086-1093.(Zhang Xiaowei, Liu Hongxi, Jiang Yehua, et al. Laser in stiu synthesized TiN/Ti3Al composite coatings. Acta Metallurgica Sinica, 2011, 47(8):1086-1093)

[5] 刘振侠,黄卫东,万柏涛.送粉式激光熔覆数值模型基本问题研究［J］.中国激光, 2003, 30(6):567-570.(Liu Zhenxia, Huang Weidong, Wan Baitao. Investigation of basicproblems of the numerical model for powder-feed laser cladding. Chin J Lasers, 2003, 30(6):567-570)

[6] El Cheikh H, Courant B, Guillen R, et al. Prediction and analytical description of the single laser track geometry in direct laser fabrication from process parameters and energy balance reasoning［J］. Journal of Materials Processing Technology, 2012, 136(12):1-27.

[7] 关振中.送粉激光熔覆应用基础理论的研究［D］.长春:中国科学院, 2000.(Guan Zhenzhong. An investigation on the appling fundamentals of powder feeding laser cladding. Changchun: Chinese Academy of Sciences, 2000)

[8] 靳绍巍,何秀丽,武扬,等.同轴送粉激光熔覆中粉末流对光束能量的衰减作用［J］.中国激光, 2011, 38(9):1-6.(Jin Shaowei, He Xiuli, Wu Yang, et al. Laser power attenuation by powder flow in coaxial laser cladding. Chin J Lasers, 2011, 38(9):1-6)

[9] 张庆茂,刘文今,杨森,等.送粉式激光熔覆激光热有效利用率的检测方法及其影响因素［J］.应用激光, 2001, 21(5):299-302.(Zhang Qingmao, Liu Wenjin, Yang Sen, et al. The experimental measurement of the effective heat utilization of laser and related factors in the process of powder feeding laser cladding. Applied Laser, 2001, 21(5):299-302)

[10] Zhou Shengfeng, Dai Xiaoqin, Zheng Haizhong. Analytical modeling and experimental investigation of laser induction hybrid rapid cladding for Ni-based WC composite coatings［J］. Optics and Laser Technology, 2012, 43:613-621.

[11] Picasso M, Marsden C F, Wagniere J D, et al. A simple but realistic model for laser cladding［J］. Metall Mater Trans B, 1994, 25(2):281-291.

[12] 张庆茂,刘文今,杨森,等.送粉式激光熔覆层横截面面积的分析模型［J］.材料热处理学报, 2001, 22(4):65-69.(Zhang Qingmao, Liu Wenjin, Yang Sen, et al. The cross-section analytical model of the laser cladded coating by powder feeding method. Transactions of Materials and Heat Treatment, 2001, 22(4):65-69)

[13] 王志坚,董世运,徐滨士,等.激光熔覆工艺参数对金属成形效率和形状的影响［J］.红外与激光工程, 2010, 39(2):315-319.(Wang Zhijian, Dong Shiyun, Xu Binshi, et al. Effect of laser cladding processing efficiency and parameters on metal forming geometry. Infrared and Laser Engineering, 2010, 39(2):315-319)

[14] 朱润生.自熔合金粉末的研究［J］.粉末冶金工业, 2000, 10(2):7-14.(Zhu Runsheng. Investigation on self-fluxing alloy powders. Powder Metallurgy Industry, 2000, 10(2):7-14)

[15] 张庆茂,刘文今,钟敏霖,等.宽带激光熔覆工艺参数对熔覆层质量的影响［J］.钢铁研究学报, 2001, 13(4):14-18.(Zhang Qingmao, Liu Wenjin, Zhong Minlin, et al. Effect of processing parameters for broad beam laser on quality of cladded coating. Journal of Iron and Steel Research, 2001, 13(4):14-18)

[16] 刘喜明,连建设.送粉式激光熔覆热和熔覆材料有效利用率影响因素的研究［J］.中国表面工程, 2000, 48(3):34-37.(Liu Ximing, Lian Jianshe. A study on the factors influencing the effective utility rates of cladding heat and coating material in powder feeding type laser cladding. China Surface Engineering, 2000, 48(3):34-37)