[1] 方沁林. 圆度误差评定的算法研究与软件设计[D]. 武汉: 华中科技大学, 2007.

    Fang Qinlin. Research on roundness evaluation algorithm and programming[D]. Wuhan: Huazhong University of Science and Technology, 2007. (in Chinese)

[2] Endrias D H, Feng H Y. Mininum-zone form tolerance evaluation using rigid-body coordinate transformation[J]. Journal of Computing and Information Science in Engineering, 2003, 3(1): 31-38.

[3] 周森, 郭永彩, 高潮. 用于大尺寸工件的动态长度测量系统. 光学 精密工程, 2012, 20(11): 2472-2478.

    Zhou Sen, Guo Yongcai, Gao Chao. Dynamic length measuring system for large scale workpieces[J]. Optics and Precision Engineering, 2012, 20(11): 2472-2478. (in Chinese)

[4] 胡文川, 裘祖荣, 张国雄. 大尺寸空间异面直线夹角的检测[J]. 光学 精密工程, 2012, 20(7): 1427-1433.

    Hu Wenchuan, Qiu Zurong, Zhang Guoxiong. Measurement of large-scale space angle formed by non-uniplanar lines[J]. Optics and Precision Engineering, 2012, 20(7): 1427-1433. (in Chinese)

[5] 李结安, 谭久彬, 崔继文. 基于滤波的准直光束漂移反馈补偿方法研究[J]. 光电子 激光, 2013, 4(2): 336-342.

    Li Jiean, Tan Jiubin, Cui Jiwen. Study on method of feedback compensation drift of collimation beam based on filter[J]. Journal of Optoeletronics Laser, 2013, 4(2): 336-342. (in Chinese)

[6] 张震, 周孟莲, 张检民, 等. CCD中激光光斑阴影现象及机理[J]. 光学 精密工程, 2013, 21(5): 1365-1370.

    Zhang Zhen, Zhou Menglian, Zhang Jianmin, et al. Shadows of laser spots in CCD and their mechanism[J]. Optics and Precision Engineering, 2013, 21(5): 1365-1370. (in Chinese)

[7] 王希军. 激光散斑的亚像素位移法计算及比较[J]. 中国光学, 2012, 5(6): 652-657.

    Wang Xijun. Computation and comparison of laser speckle with sub-pixel measurement methods[J]. Chinese Optics, 2012, 5(6): 652-657. (in Chinese)

[8] 刘杰, 李华, 常何民, 等. 内套筒安装测量系统及其圆度误差滤除算法[J]. 中国激光, 2014, 41(6): 626-630.

    Liu Jie, Li Hua, Chang Hemin, et al. System contributing to install inside sleeve anf filtering algorithm to evaluate its roundness error[J]. Chinese Journal of Lasers, 2014, 41(6): 626-630. (in Chinese)

[9] 张春阳, 雷贤卿, 李济顺, 等. 基于几何优化的圆度误差评定算法[J]. 机械工程学报, 2010, 46(12): 8-11.

    Zhang Chunyang, Lei Xianqing, Li Jishun, et al. Method of roundness error evaluation based on geometry optimization [J]. Journal of Mechanical Engineering, 2010, 46(12): 8-11. (in Chinese)

[10] 雷贤卿, 畅为航, 薛玉君, 等. 圆度误差的网格搜索算法[J]. 仪器仪表学报, 2008, 29(11): 2324-2329.

    Lei Xianqing, Chang Weihang, Xue Yujun, et al. Evaluation of roundness error based on mesh searching arithmetic[J]. Chinese Journal of Scientific Instrument, 2008, 29(11): 2324-2329. (in Chinese)

[11] 黄富贵, 郑育军. 基于区域搜索的圆度误差评定方法[J]. 计量学报, 2008, 29(2): 117-119.

    Huang Fugui, Zheng Yujun. A method for roundness error evaluation based on area hunting[J]. Acta Metrological Sinica, 2008, 29(2): 117-119. (in Chinese)

[12] 刘书桂, 杨芳, 陶晋. 计算几何在测试计量技术中的应用——求解最小外接圆[J]. 工程图学学报, 2000, 3: 83-89.

    Liu Shugui, Yang Fang, Tao Jin. Valuation of minimum circumscribed circle form error by computational geometry approach[J]. Journal of Engineering Graphics, 2000, 3: 83-89. (in Chinese)

[13] 岳武陵, 吴勇. 基于仿增量算法的圆度误差快速准确评定[J]. 机械工程学报, 2008, 44(1): 87-91.

    Yue Wuling, Wu Yong. Roundness error based on quasi-incremental algorithm[J]. Chinese Journal of Mechanical Engineering, 2008, 44(1): 87-91. (in Chinese)