[1] Zhou F F, Wang Y, Wang L, et al. High temperature oxidation and insulation behavior of plasma-sprayed nanostructured thermal barrier coatings[J]. Journal of Alloys and Compounds, 2017, 704: 614-623.

[2] Wang Y Z, Li J L, Liu H Z, et al. Study on thermal resistance performance of 8YSZ thermal barrier coatings[J]. International Journal of Thermal Sciences, 2017, 122: 12-25.

[3] Han M, Zhou G D, Huang J H, et al. Optimization selection of the thermal conductivity of the top ceramic layer in the double-ceramic-layer thermal barrier coatings based on the finite element analysis of thermal insulation[J]. Surface and Coatings Technology, 2014, 240: 320-326.

[4] Bernard B, Quet A, Bianchi L, et al. Thermal insulation properties of YSZ coatings: suspension plasma spraying (SPS) versus electron beam physical vapor deposition (EB-PVD) and atmospheric plasma spraying (APS)[J]. Surface and Coatings Technology, 2017, 318: 122-128.

[5] 周圣丰, 刘佳, 熊征, 等. 提高MCrAlY涂层抗高温氧化性能方法的研究进展[J]. 激光与光电子学进展, 2015, 52(12): 120004.

    Zhou S F, Liu J, Xiong Z, et al. Research progress on improving the high-temperature oxidation resistance of MCrAlY coatings[J]. Laser & Optoelectronics Progress, 2015, 52(12): 120004.

[6] Bakan E, Mack D E, Mauer G, et al. Gadolinium zirconate/YSZ thermal barrier coatings: plasma spraying, microstructure, and thermal cycling behavior[J]. Journal of the American Ceramic Society, 2014, 97(12): 4045-4051.

[7] Xu Z H, He L M, Mu R D, et al. Double-ceramic-layer thermal barrier coatings based on La2(Zr0.7Ce0.3)2O7/La2Ce2O7 deposited by electron beam-physical vapor deposition[J]. Applied Surface Science, 2010, 256(11): 3661-3668.

[8] Pereira J C, Zambrano J C, Rayón E, et al. Mechanical and microstructural characterization of MCrAlY coatings produced by laser cladding: the influence of the Ni, Co and Al content[J]. Surface and Coatings Technology, 2018, 338: 22-31.

[9] 周圣丰, 戴晓琴, 熊征, 等. 激光感应复合快速熔覆功能梯度YSZ/NiCrAlY涂层的研究[J]. 中国激光, 2013, 40(4): 0403004.

    Zhou S F, Dai X Q, Xiong Z, et al. Functionally graded YSZ/NiCrAlY coating prepared by laser induction hybrid rapid cladding[J]. Chinese Journal of Lasers, 2013, 40(4): 0403004.

[10] Rezanka S, Somsen C, Eggeler G, et al. A TEM investigation of columnar-structured thermal barrier coatings deposited by plasma spray-physical vapor deposition (PS-PVD)[J]. Plasma Chemistry and Plasma Processing, 2018, 38(4): 791-802.

[11] 张小锋, 周克崧, 宋进兵, 等. 等离子喷涂-物理气相沉积7YSZ热障涂层沉积机理及其CMAS腐蚀失效机制[J]. 无机材料学报, 2015, 30(3): 287-293.

    Zhang X F, Zhou K S, Song J B, et al. Deposition and CMAS corrosion mechanism of 7YSZ thermal barrier coatings prepared by plasma spray-physical vapor deposition[J]. Journal of Inorganic Materials, 2015, 30(3): 287-293.

[12] Yanar N M, Helminiak M, Meier G H, et al. Comparison of the failures during cyclic oxidation of yttria-stabilized (7 to 8 weight percent) zirconia thermal barrier coatings fabricated via electron beam physical vapor deposition and air plasma spray[J]. Metallurgical and Materials Transactions A, 2011, 42(4): 905-921.

[13] Wu J, Guo H B, Abbas M, et al. Evaluation of plasma sprayed YSZ thermal barrier coatings with the CMAS deposits infiltration using impedance spectroscopy[J]. Progress in Natural Science: Materials International, 2012, 22(1): 40-47.

[14] Schlichting K W, Padture N P, Jordan E H, et al. Failure modes in plasma-sprayed thermal barrier coatings[J]. Materials Science and Engineering: A, 2003, 342(1/2): 120-130.

[15] Pereira J C, Zambrano J C, Tobar M J, et al. High temperature oxidation behavior of laser cladding MCrAlY coatings on austenitic stainless steel[J]. Surface and Coatings Technology, 2015, 270: 243-248.

[16] Zeng S B, Liu Y J, Fan X Z, et al. Thermal shock resistance of APS 8YSZ thermal barrier coatings on titanium alloy[J]. Journal of Thermal Spray Technology, 2012, 21(2): 335-343.