强激光与粒子束, 2016, 28 (10): 104001, 网络出版: 2016-09-14  

硬化伪影的新型表现形式及其校正

Form and correction of a new type of artifact induced by beam hardening
陈云斌 1,2,*陈思 1,2李敬 1,2
作者单位
1 中国工程物理研究院 应用电子学研究所, 四川 绵阳 621900
2 国家X射线数字化成像仪器中心, 四川 绵阳 621000
引用该论文

陈云斌, 陈思, 李敬. 硬化伪影的新型表现形式及其校正[J]. 强激光与粒子束, 2016, 28(10): 104001.

Chen Yunbin, Chen Si, Li Jing. Form and correction of a new type of artifact induced by beam hardening[J]. High Power Laser and Particle Beams, 2016, 28(10): 104001.

参考文献

[1] Herman G T. Correction for beam hardening in computed tomography[J]. Phys Med Biol, 1979, 24(1): 81-106.

[2] 叶侠娟, 张朋. CT系统的能谱估计及射束硬化校正算法[J]. CT理论与应用研究, 2003, 12(2): 10-15. (Ye Xiajuan, Zhang Peng. Estimation of energy spectra of CT system and beam hardening correction algorithm. CT Theory and Applications, 2003, 12(2): 10-15)

[3] 李岭, 高富强, 周钦, 等. 低能X射线工业CT图像杯状伪影校正[J]. 强激光与粒子束, 2014, 26: 059004. (Li Ling, Gao Fuqiang, Zhou Qin, et al. Cupping artifact correction for low-energy X-ray industrial CT images. High Power Laser and Particle Beams, 2014, 26: 059004)

[4] Prell D, Kalender W A, Kyriakou Y. Development, implementation and evaluation of a dedicated metal artifact reduction method for interventional flat-detector CT[J]. The British Journal of Radiology, 2010, 83: 1052-1062.

[5] Prell D, Kyriakou Y, Beister M, et al. A novel forward projection-based metal artifact reduction method for flat-detector computed tomography[J]. Physics in Medicine and Biology, 2009, 54: 6575-6591.

[6] 杨民, 路宏年, 路远. CT重构中射线硬化的校正研究[J]. 光学技术, 2003, 29(2) : 177-178. (Yang Min, Lu Hongnian, Lu Yuan. Method of beam hardening correction for CT reconstruction. Optical Technique, 2003, 29(2): 177-178)

[7] 张全红, 路宏年, 杨民. 基于重投影的多项式拟合校正射束硬化[J]. 光学技术, 2005, 31(4): 633-635. (Zhang Quanhong, Lu Hongnian, Yang Min. Beam hardening correction using polynomial fitting based on reprojection. Optical Technique, 2005, 31(4): 633-635)

[8] 李寿涛, 陈云斌, 陈浩, 等. 单材质物体锥束CT成像的硬化校正[J]. 光电工程, 2012, 39(1): 135-139. (Li Shoutao, Chen Yunbin, Chen Hao, et al. Beam hardening correction of single-material objects in CT imaging. Opto-Electronic Engineering, 2012, 39(1): 135-139)

[9] Van de Casteele E, Van Dyck D, Sijbers J. An energy-based beam hardening model in tomography[J]. Physics in Medicine and Biology, 2002, 47(23): 4181-4190.

[10] 彭光含, 蔡新华, 韩忠, 等. X射线TICT在复合材料工件检测中的射束硬化拟合校正研究[J]. 光谱学与光谱分析, 2007, 27(9): 1882-1885. (Peng Guanghan, Cai Xinhua, Han Zhong, et al. Beam hardening simulated correction research for X-ray TICT in testing composites workpiece. Spectroscopy and Spectral Analysis, 2007, 27(9): 1882-1885)

[11] Hsieh J, Molthen R C, Dawson C A. An iterative approach to the beam hardening correction in cone beam CT[J]. Med Phys, 2000, 27(1): 23-29.

陈云斌, 陈思, 李敬. 硬化伪影的新型表现形式及其校正[J]. 强激光与粒子束, 2016, 28(10): 104001. Chen Yunbin, Chen Si, Li Jing. Form and correction of a new type of artifact induced by beam hardening[J]. High Power Laser and Particle Beams, 2016, 28(10): 104001.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!