[1] 江少恩,李文洪,孙可煦,等. 神光Ⅱ上柱形黑腔辐射驱动冲击波[J].物理学报,2004,53(10): 3424-3428.(Jiang Shaoen, Li Wenhong, Sun Kexu, et al. Shock wave driven by X-ray radiation from cylindrical hohlraum on ShenguangⅡlaser. Acta Physica Sinica,2004,53(10): 3424-3428)

[2] Foreman L R, Gobby P, Bamos J, et al. Hohlraum manufacture for inertial confinement fusion[R]. LA-UR-94-2065, 1994.

[3] 丁永坤,江少恩,刘慎业,等. 激光聚变研究中心聚变靶物理实验和诊断技术研究进展[J].强激光与粒子束,2013,25(12): 3077-3081.(Ding Yongkun, Jiang Shaoen, Liu Shenye, et al. Recent progress on physical experiment and target diagnostics in Research Center of Laser Fusion. High Power Laser and Particle Beams,2013,25(12): 3077-3081)

[4] 陈伯伦,蒋炜,景龙飞,等. 发射技术测量SGⅡ黑腔靶早期对称性[J].强激光与粒子束,2013,25(2): 385-388.(Chen Bolun, Jiang Wei, Jing Longfei, et al. Re-emission technique for early time, hohlraum radiation symmetry measurements on SGⅡ facility. High Power Laser and Particle Beams,2013,25(2): 385-388)

[5] 黄燕华,贺大兴,袁光辉. 加装气浮飞刀铣削装置的车床改造及应用[J].制造技术与机床,2009(12): 128-131.(Huang Yanhua, He Daxing, Yuan Guanghui. Transformation and application of the lathe with fly-cutter milling equipment. Manufacture Technology and Machine,2009(12): 128-131)

[6] 张昭瑞,朱磊,黄燕华,等.柱腔上微孔电火花加工技术[J].科学技术与工程,2012,12(1): 151-153.(Zhang Zhaorui, Zhu Lei, Huang Yanhua, et al. Micro-holes electrical discharge machining technology in cylinder hohlraums.Science Technology and Engineering,2012, 12(1): 151-153)

[7] 谢军, 张昭瑞, 梅鲁生, 等. SiO2/CH/Au复合黑腔诊断孔电火花加工技术[J].强激光与粒子束,2014,26: 112002.(Xie Jun, Zhang Zhaorui, Mei Lusheng, et al. Fabrication of diagnostic hole of SiO2/CH/Au hohlraum by micro-electrical discharge machining.High Power Laser and Particle Beams,2014,26: 112002)

[8] Schultz K R, Kea J L, Miller W J, et al. Status of inertial fusion target fabrication in the USA[R]. GA-A22610, 1997.

[9] 王振龙. 微细加工技术[M]. 北京:国防工业出版社,2005: 80-81.(Wang Zhenlong. Micro Manufacturing Technology. Beijing: National Defence Industry Press, 2005: 80-81)