基于激光熔覆制备的梯度耐磨涂层性能研究
张昌春, 石岩, 王洪新. 基于激光熔覆制备的梯度耐磨涂层性能研究[J]. 应用激光, 2017, 37(6): 763.
Zhang Changchun, Shi Yan, Wang Hongxin. Research on Properties of Gradient Wear-resisting Coating Based on Laser Cladding[J]. APPLIED LASER, 2017, 37(6): 763.
[1] ASANTA M, GANESH P, RAKESH K, et al.Development of a hard nano-structured multi-component ceramic coating by laser cladding[J].Materials Science and Engineering, 2009, A508(1-2): 134-140.
[2] CYLOK S, WEISHEIT A, KELBASSA I.Functionally graded multi-layers by laser cladding for increased wear and corrosion protection[J].Physics Procedia, 2010, 5: 359-367.
[3] XU G J, MUNAHARU K, LIU Z J, et al.Characteristic behaviours of clad layer by a multi-layer laser cladding with powder mixture of stellite-6 and tungsten carbide[J].Surface and Coatings Technology, 2006, 201(6): 3385-3392.
[4] 杨胶溪, 左铁钏, 王喜兵, 等.9Cr2Mo冷轧辊激光宽带熔覆修复强化[J].应用激光, 2008, 28(1): 1-5.
[5] 王增平, 胡芳友, 胡滨, 等.K418高温合金多层多道激光熔覆工艺研究[J].新技术新工艺, 2009(4): 78-80.
WANG ZENGPING, HU FANGYOU, HU BING, et al.Research on laser cladding super alloy K418 by multipass and multi-layer method[J].New Technology & New Process, 2009(4): 78-80.
[6] 李胜, 曾晓雁, 胡乾午, 等.多层熔覆对激光熔覆层微观组织和硬度的影响[J].金属热处理, 2007, 32(7): 44-47.
LI SHENG, ZENG XIAOYAN, HU QIANWU, et al.Influence of multilayer cladding on microstructure and hardness of laser-clad layers[J].Heat Treatment of Metals, 2007, 32(7): 44-47.
[7] 董江, 刘芳, 陈岁元, 等.铜板上激光熔覆制备Co-Ni-Cu梯度涂层[J].东北大学学报(自然科学版), 2008, 29(11): 1581-1584.
DONG JIANG, LIU FANG, CHEN SUIYUAN, at al.Preparation of Co-Ni-Cu gradient coatings by CO2 laser cladding on copperplate[J].Journal of Northeastern University(Natural Science), 2008, 29(11): 1581-1584.
[8] 张永忠, 席明哲, 石力开.激光熔覆沉积制备多层316L不锈钢-Stellite31合金梯度功能材料[J].金属热处理, 2007, 32(9): 45-47.
ZHANG YONGZHONG, XI MINGZHE, SHI LIKAI.Multi-layer functional gradient materials of 316L stainless steel to stellite 31 alloy prepared by laser clad deposition[J].Heat Treatment of Metals, 2007, 32(9): 45-47.
[9] 乔世杰, 刘秀波, 翟永杰, 等.TA2合金激光熔覆钛基自润滑耐磨复合涂层的高温摩擦学性能[J].中国激光, 2016, 43(12): 1202008.
QIAO SHIJIE, LIU XIUBO, ZHAI YONGJIE, at al.High temperature tribological properties of laser cladding titanium matrix self-lubricating wear resistant composite coating on TA2 alloy[J].Chinese Journal of Lasers, 2016, 43(12): 1202008.
[10] 任佳, 刘秀波, 余鹏程, 等.不同载荷下钛合金激光熔覆 Ni60 / h-BN自润滑耐磨复合涂层的摩擦学性能[J].摩擦学学报, 2015, 35(4): 407-414.
REN JIA, LIU XIUBO, YU PENGCHENG, at al.Effect of normal load on tribological properties of Ni60 /h-BN self-lubricating anti-wear composite coating on Ti6Al4V alloy by laser cladding[J].Tribology, 2015, 35(4): 407-414.
[11] 何波, 庄家良, 兰姣姣, 等.激光熔覆碳化钨／钴基合金复合涂层的组织与耐磨性能[J].应用激光, 2017, 37(3), 314-318.
[12] 刘其斌, 王存山, 夏元良.宽带激光熔覆WCp/Ni基合金梯度涂层中WCp的溶解机理[J].金属热处理学报, 2001, 22(3): 33-36.
LIU QIBIN, WANG CUNSHAN, XIA YUANLIANG.Study on solution mechanism of cast WCp /Ni base alloy gradient coating by wide-band laser cladding[J].Transactions of Materials and Heat Treatment, 2001, 22(3): 33-36.
[13] 郭娜.H13钢表面激光熔覆梯度涂层及其组织与性能研究[D].沈阳: 东北大学, 2014.
GUO NA.Investigation on microstructure and properties of gradient coating prepared by laser cladding on H13 steel[D].Shenyang: Northeastern University, 2014.
[14] FERNANDEZ E, CADENAS M, GONZALEZ R, at al.Wear behaviour of laser clad NiCrBSi coating[J].Wear, 2005, 259(7-12): 870-875.
[15] DESALE G R, PAUL C P, GANDHI B K, et al.Erosion wear behavior of laser clad surfaces of low carbon austenitic steel[J].Wear, 2009, 266(9-10): 975-987.
张昌春, 石岩, 王洪新. 基于激光熔覆制备的梯度耐磨涂层性能研究[J]. 应用激光, 2017, 37(6): 763. Zhang Changchun, Shi Yan, Wang Hongxin. Research on Properties of Gradient Wear-resisting Coating Based on Laser Cladding[J]. APPLIED LASER, 2017, 37(6): 763.
PDF全文
