[1] 唐金兰, 刘佩进. 固体火箭发动机原理[M]. 北京: 国防工业出版社, 2013: 50- 54.

    Tang JL, Liu PJ. Principles of solid rocket motor[M]. Beijing: National Defense Industry Press, 2013: 50- 54.

[2] 李疏芬, 金乐骥. 铝粉粒度对含铝推进剂燃烧特性的影响[J]. 含能材料, 1996, 4(2): 68-74.

    Li S F, Jin L J. Effects of aluminum particle size on combustion behavior of propellants[J]. Energetic Materials, 1996, 4(2): 68-74.

[3] Takahashi K, Oide S, Kuwahara T. Agglomeration characteristics of aluminum particles in AP/AN composite propellants[J]. Propellants, Explosives, Pyrotechnics, 2013, 38: 555-562.

[4] 姚龙超, 吴学成, 林小丹, 等. 基于高速数字全息的燃烧生物质颗粒测试[J]. 激光与光电子学进展, 2019, 56(10): 100901.

    Yao L C, Wu X C, Lin X D, et al. Measurement of burning biomass particles via high-speed digital holography[J]. Laser & Optoelectronics Progress, 2019, 56(10): 100901.

[5] 李疏芬, 金荣超. 固体推进剂燃烧残渣的粒度分析[J]. 固体火箭技术, 1995, 18(4): 23-28.

    Li S F, Jin R C. Particle size analysis of combustion residue of solid propellant[J]. Journal of Solid Rocket Technology, 1995, 18(4): 23-28.

[6] 刘鑫. 基于光学拍摄技术的含铝固体推进剂燃面处铝团聚研究[D]. 西安: 西北工业大学, 2016: 31- 54.

    LiuX. Investigation on aluminum agglomeration on the burning surface of solid propellants by optical observation technology[D]. Xi'an:Northwestern Polytechnical University, 2016: 31- 54.

[7] 金秉宁, 刘佩进, 王志新. 数字全息在固体推进剂铝燃烧三维测量中的应用研究[J]. 推进技术, 2018, 39(9): 2102-2109.

    Jin B N, Liu P J, Wang Z X. Application of digital holography in 3D measurement of aluminum combustion in solid propellant[J]. Journal of Propulsion Technology, 2018, 39(9): 2102-2109.

[8] 邱俊, 陈晨, 罗晓庆, 等. 一种固体火箭发动机燃烧室凝相产物粒径在线测量方法[J]. 固体火箭技术, 2018, 41(3): 303-307, 312.

    Qiu J, Chen C, Luo X Q, et al. An on-line measurement method for particle diameter determinations of solid-phase products of a SRM combustor[J]. Journal of Solid Rocket Technology, 2018, 41(3): 303-307, 312.

[9] 徐峰, 蔡小舒, 赵志军, 等. 光散射粒度测量中采用Fraunhofer衍射理论或Mie理论的讨论[J]. 中国粉体技术, 2003, 9(2): 1-6.

    Xu F, Cai X S, Zhao Z J, et al. Discussion of Fraunhofer diffraction theory and Mie's theory in particle sizing[J]. China Powder Science and Technology, 2003, 9(2): 1-6.

[10] 徐峰, 蔡小舒, 沈嘉祺. 米氏理论的近似及在粒度测量中的应用[J]. 光学学报, 2003, 23(12): 1464-1469.

    Xu F, Cai X S, Shen J Q. Geometric approximation of light scattering in arbitrary diffraction regime for absorbing particles: application in laser particle sizing[J]. Acta Optica Sinica, 2003, 23(12): 1464-1469.

[11] 蔡小舒, 苏明旭, 沈建琪, 等. 颗粒粒度测量技术及应用[M]. 北京: 化学工业出版社, 2010: 67- 76.

    Cai XS, Su MX, Shen JQ, et al.Particle sizing technology and application[M]. Beijing: Chemical Industry Press, 2010: 67- 76.

[12] 张茂根, 翁志学, 黄志明, 等. 颗粒统计平均粒径及其分布的表征[J]. 高分子材料科学与工程, 2000, 16(5): 1-4.

    Zhang M G, Weng Z X, Huang Z M, et al. Characterization of statistical average particle size and particle size distribution[J]. Polymer Materials Science & Engineering, 2000, 16(5): 1-4.

[13] 王天恩, 沈建琪, 林承军. 前向散射颗粒粒径分布分析中的向量相似度反演算法[J]. 光学学报, 2016, 36(6): 0629002.

    Wang T E, Shen J Q, Lin C J. Vector similarity retrieval algorithm in particle size distribution analysis of forward scattering[J]. Acta Optica Sinica, 2016, 36(6): 0629002.

[14] Yang B, Guo H R, Gui X Y, et al. On-line combustion temperature measurements of solid rocket propellant by using radiation spectroscopy[J]. Spectroscopy and Spectral Analysis, 2018, 38(6): 1958-1962.

[15] 沈建琪, 王乃宁. 关于小角前向散射激光测粒仪准则数X的讨论[J]. 中国激光, 1998, 25(10): 891-896.

    Shen J Q, Wang N N. A discussion on the criterion number X of a small-angle forward scattering laser particle sizer[J]. Chinese Journal of Lasers, 1998, 25(10): 891-896.

[16] 胡华, 张福根, 吕且妮, 等. 激光粒度仪的测量上限[J]. 光学学报, 2018, 38(4): 0429001.

    Hu H, Zhang F G, Lü Q N, et al. Measurement upper limit of laser particle size analyzer[J]. Acta Optica Sinica, 2018, 38(4): 0429001.