镀锌钢激光添粉焊接的等离子体监测机理
张屹, 段林勇, 周惦武, 李时春, 王存山. 镀锌钢激光添粉焊接的等离子体监测机理[J]. 中国激光, 2012, 39(5): 0503005.
Zhang Yi, Duan Linyong, Zhou Dianwu, Li Shichun, Wang Cunshan. Monitoring Mechanism of Plasma Generated by Laser Welding Galvanized Steel with Powder Feeding[J]. Chinese Journal of Lasers, 2012, 39(5): 0503005.
[1] 卢兵兵, 白车身车顶侧围激光焊接工艺参数分析与优化[J]. 中国激光, 2010, 37(5): 1375~1379
[2] 陈根余, 陈飞, 张屹 等. 对接间隙对车用高强钢光纤激光焊接的影响[J]. 中国激光, 2011, 38(6): 0603013
[3] 张健, 杨锐. 基于径向基函数神经网络的激光焊接熔池强分布预测[J]. 中国激光, 2010, 37(7): 1856~1860
[4] 张屹, 李时春, 金湘中 等. 镀锌钢板激光焊接关键技术研究[J]. 激光与光电子学进展, 2010, 46(7): 071401
Zhang Yi, Li Shichun, Jin Xiangzhong et al.. Research on the key technology of laser welding of galvanized steel[J]. Laser & Optoelectronics Progress, 2010, 46(7): 071401
[5] 高世一, 吴瑞珉, 陈卫东 等. 激光焊接过程监测及焊缝质量检测技术研究现状[J]. 世界钢铁, 2010, 10(3): 51~54
Gao Shiyi, Wu Ruimin, Chen Weidong et al.. Development status of laser welding process monitor and seam quality detection[J]. World Iron & Steel, 2010, 10(3): 51~54
[6] 段爱琴, 胡伦骥, 王亚军. 激光深熔焊焊缝的熔透性监测研究[J]. 中国激光, 2005, 32(1): 131~134
[7] 曾浩, 周祖德, 陈幼平 等. 激光焊接过程实时监测[J]. 中国激光, 2001, A28(3): 284~288
[8] 王春明, 余福林, 段爱琴. 非穿透激光深熔焊熔深与等离子体光信号的关系[J]. 焊接学报, 2002, 23(5): 45~49
Wang Chunming, Yu Fulin, Duan Aiqin. The relationship between penetration and plasma optical signal of deep non-penetrating laser welding[J]. Transactions of the China Welding Institution, 2002, 23(5): 45~49
[9] 李明星. 镀锌板的激光填充粉末焊接[D]. 北京: 北京工业大学, 2006. 6~9
Li Mingxing. Laser Welding of Zinc-Coated Steels with Filler Powder[D]. Beijing: Beijing University of Technology, 2006. 6~9
[10] 熊建钢, 胡伦骥, 刘建华 等. 镀锌板激光焊接工艺及锌行为研究[J]. 激光技术, 1998, 22(1): 26~28
Xiong Jiangang, Hu Lunji, Liu Jianhua et al.. Study on laser welding of zinc coated steel and the effects of zinc vaporization[J]. Laser Technology, 1998, 22(1): 26~28
[11] 崔怀洋, 陈铠, 左铁钏. 镀锌钢板的CO2激光焊焊接性[J]. 焊接学报, 2004, 25(4): 115~118
Cui Huaiyang, Chen Kai, Zuo Tiechuan. CO2 laser welding of galvanized steel welding[J]. Transactions of The China Welding Institution, 2004, 25(4): 115~118
[12] A. Loredo, B. Martin, H. Andrzejewski et al.. Numerical support for laser welding of zinc-coated sheets process development[J]. Applied Surface Science, 2002, 195: 297~303
[13] Weichiat Chen, Paul Ackerson, Pal Molian. CO2 laser welding of galvanized steel sheets using vent holes[J]. Materials and Design, 2009, 30: 245~251
[14] 唐霞辉, 周毅, 李适民 等. 粉末冶金材料激光深熔焊接光致等离子体行为及控制[J]. 中国激光, 2004, 31(2): 237~240
[15] 张盛海, 陈铠, 肖荣诗 等. 填充粉末对铝合金高功率CO2激光焊接的影响[J]. 中国激光, 2005, 32(6): 860~863
[16] Guohua Li, Yan Cai, Yixiong Wu. Stability information in plasma image of high-power CO2 laser welding[J]. Opt. & Lasers in Engng., 2009, 47: 990~994
[17] 辛仁轩. 等离子体发射光谱分析[M]. 北京: 化学工业出版社, 2005. 19~21
Xin Renxuan. Spectrum Analysis of Plasma Emission[M]. Beijing: Chemical Industry Press, 2005. 19~21
张屹, 段林勇, 周惦武, 李时春, 王存山. 镀锌钢激光添粉焊接的等离子体监测机理[J]. 中国激光, 2012, 39(5): 0503005. Zhang Yi, Duan Linyong, Zhou Dianwu, Li Shichun, Wang Cunshan. Monitoring Mechanism of Plasma Generated by Laser Welding Galvanized Steel with Powder Feeding[J]. Chinese Journal of Lasers, 2012, 39(5): 0503005.