强激光与粒子束, 2005, 17 (11): 1730, 网络出版: 2006-04-28
基于多导体传输线理论的脉冲变压器锥形绕组电压分布数值分析
Numerical calculation of voltage distribution on pulse transformer's conical windings based on multi-conductor transmission line theory
脉冲变压器 电压分布 有限元 多导体传输线 Pulse transformer Voltage distribution Finite element Multi-conductor transmission line
摘要
为了研究脉冲变压器锥形绕组在脉冲电压作用下的电压分布特性,采用多导体传输线方法,根据实际脉冲变压器锥形绕组的结构,建立了电气参数有限元简化计算模型及等效多导体传输线分析数学模型,以此模型计算了锥形绕组在脉冲电压激励下匝间的电压分布.计算结果表明,此模型可对脉冲变压器锥形绕组的电压分布进行有效计算,对绕组匝间绝缘设计有一定的参考意义.
Abstract
In order to study the voltage distribution on the pulse transformer's conical windings,according to the structure of the actual pulse transformer's taper windings,the finite element model and equivalent circuit were built based on the multi-conductor transmission line theory.Using the model and circuit,the voltage distribution between the coils on the pulse was calculated.Computational results are presented to illustrate that the model can be used to calculate the voltage distribution in taper coil efficiently,which gives some references for the design of inter-turn insulation.
李名加, 常安碧, 康强, 阮江军, 彭迎, 张宇. 基于多导体传输线理论的脉冲变压器锥形绕组电压分布数值分析[J]. 强激光与粒子束, 2005, 17(11): 1730. LI Ming-jia, CHANG An-bi, KANG Qiang, RUAN Jiang-jun, PENG Ying, ZHANG Yu. Numerical calculation of voltage distribution on pulse transformer's conical windings based on multi-conductor transmission line theory[J]. High Power Laser and Particle Beams, 2005, 17(11): 1730.
PDF全文
