[1] 冯维, 曲兴华, 王惟婧, 等. 基于数字微镜成像系统的响应曲线标定方法研究［J］. 光学学报,2018,38(04):176—182.

    Feng Wei, Qu Xinhua,Wang Weiqing, et al. Research on response curve calibration method of imaging system based on digital micromirror device［J］. Acta Optica Sinica,2018,38(04):176—182.

[2] 高泽东, 朱院院, 高教波, 等. 动态红外三角形目标及干扰模拟技术研究［J］. 应用光学,2013,34(02):341—348.

    Gao Zedong, Zhu Yuanyuan, Gao Jiaobo, et al. Simulation technology of dynamic infrared triangle target with decoy［J］. Journal of Applied Optics,2013,34(02):341—348.

[3] 李林, 黄一帆, 王涌天. 现代光学设计方法［M］. 北京:北京理工大学出版社,2015.

    Li Lin, Huang Yifan, Wang Yongtian. Modern optical design［M］. Beijing:Beijing Institute of Technology Press, 2015.

[4] 陈哲, 张星祥, 陈长征, 等. 高分辨率共孔径同轴三反光学系统［J］. 中国激光,2015,42(11):310—316.

    Chen Zhe, Zhang Xingxiang, Chen Changzheng, et al. A common aperture coaxial three-mirror optical system with high resolution［J］. Chinese Journal of Lasers,2015,42,(11):310—316.

[5] 刘军, 刘伟奇, 康玉思, 等. 大视场离轴四反射镜光学系统设计［J］. 光学学报,2013,33(10):235—240.

    Liu Jun, Liu Weiqi, Kang Yusi, et al. Optical design of off-axis four-mirror optical system with wide field of view［J］. Acta Optica Sinica,2013,33(10):235—240.

[6] Seidl K, Knobbe J, Gruger H, et al. Design of an all-reflective unobscured optical-power zoom objective［J］. Applied Optics, 2009,48(21):4097—4107.

[7] 于鑫, 张葆, 洪永丰. 一种离轴三反射系统初始结构的求解方法［J］. 激光与光电子学进展,2015,52:112201.

    Yu Xin, Zhang Bao, Hong Yongfeng. A method for solving the initial structure of an off-axis tri-reflection system［J］. Progress in Laser and Optoelectronics, 2015,52:112201.

[8] 张峰. 高精度离轴凸非球面反射镜的加工及检测［J］. 光学精密工程,2010,18(12):2557—2563.

    Zhang Feng. Fabrication and testing of precise off-axis convex aspheric mirror［J］. Optics and Precision Engineering,2010,18(12):2557—2563.

[9] Zhong Yi, Gross Herbert. Initial system design method for non-rotationally symmetric systems based on gaussian brackets and Nodal aberration theory［J］. Optics express,2017,25(9):10016—10030.

[10] 孙永雪, 夏振涛, 韩海波, 等. 大口径红外离轴三反光学系统设计及公差分析［J］. 应用光学,2018,39(06):803—808.

    Sun Yongxue, Xia Zhengtao, Han Haibo, et al. Design and tolerance analysis of infrared off-axis three-mirror optical system with large aperture［J］. Journal of Applied Optics,2018,39(06):803—808.

[11] 李旭阳, 倪栋伟, 杨明洋. 基于自由曲面的大视场空间相机光学系统设计［J］. 光子学报,2018,47(09):0922003.

    Li Xuyang, Ni Dongwei, Yang Mingyang. Design of large field of view space camera optical system based on freeform surfaces［J］. Acta Photonica Sinica,2018,47(09):0922003.

[12] 潘君骅. 光学非球面的设计加工与检验［M］. 江苏:苏州大学出版社, 2004.

    Pan Junhua. The design, manufacture and test of the aspherical optical surfaces［M］. Jiangsu: Soochow University Press,2004.

[13] 赵文才. 改进的离轴三反光学系统的设计［J］. 光学精密工程, 2011,19(12):2837—2843.

    Zhao Wencai. Design of improved off-axial TMA optical systems［J］. Optics and Precision Engineering,2011,19(12): 2837—2843.

[14] 孟晓辉, 王永刚, 李文卿, 等. Φ420mm高次非球面透镜的加工与检测［J］. 光学精密工程,2016,24(12):3068—3075.

    Meng Xiaohui, Wang Yonggang, Li Wwenqin, et al. Fabricating and testing of Φ 420mm high-order aspheric lens［J］. Optics and Precision Engineering,2016,24(12):3068—3075.