[1] 罗海波,史泽林. 红外成像制导技术发展现状与展望［J］. 红外与激光工程,2009,38(4): 565-573.

    LUO H B, SHI Z L. Status and prospect of infrared imaging guidance technology ［J］. Infrared and Laser Engineering, 2009,38(4): 565-573. (in Chinese)

[2] 王铎. 红外成像制导运动模糊图像恢复技术研究［J］. 光电技术应用,2016,31(4): 15-17+21.

    WANG D. Research on motion-blur image restoration technology of infrared imaging guidance ［J］.Electro-optic Technology Application, 2016,38(4): 15-17+21. (in Chinese)

[3] 杨俊彦,吴建东,宋敏敏. 红外成像制导技术发展展望［J］. 红外,2016,37(8): 1-6+28.

    YANG J Y, WU J D, SONG M M, Development and prospect of infrared imaging guidance technology ［J］.Infrared, 2016,37(8): 1-6+28. (in Chinese)

[4] 訚胜利,潘洪涛,王子辰,等. 非制冷红外成像在对空制导中应用的关键问题［J］. 红外与激光工程,2015,45(8): 2315-2320.

    YIN SH L, PAN H T, WANG Z CH, et al.. Key subjects of UCIR guidance applied on air defence ［J］.Infrared and Laser Engineering, 2015, 45(8): 2315-2320. (in Chinese)

[5] 朱强华,李胜勇,姜涛. 稳像技术［J］. 舰船电子对抗,2006,29(5): 77-80.

    ZHU Q H, LI SH Y, JIANG T. Image stabilization technology ［J］. Shipboard Electronic Countermeasure, 2006, 29(5): 77-80. (in Chinese)

[6] 黄卫清,史小庆,王寅. 菱形压电微位移放大机构的设计［J］. 光学 精密工程,2015,23(3): 803-809.

    HUANG W Q, SHI X Q, WANG Y. Design of diamond piezoelectric micro displacement amplification mechanism［J］. Opt. Precision Eng., 2015, 23(3): 803-809. (in Chinese)

[7] 夏永泉,贾建军. 用于航空遥感的二维像移补偿镜的设计［J］. 红外,2008,29(8): 17-20.

    XIA Y Q, JIA J J. Design of 2D image motion compensation mirror for aerial remote sensing ［J］. Infrared, 2008, 29(8): 17-20. (in Chinese)

[8] 吴鑫,陈四海,仇力,等. 用于红外凝视成像系统的光学微扫描器［J］. 光机电信息,2010,27(11): 99-104.

    WU X, CHEN S H, CHOU L,et al.. An optical microscan for a staring infrared imaging system ［J］. OME Information, 2010, 27(11): 99-104. (in Chinese)

[9] 廖胜凯,刘银年,陈小文,等. 采用压电陶瓷驱动器的高频像移补偿系统［J］. 红外与激光工程,2011,41(3): 539-543.

    LIAO SH K, LIU Y N, CHEN X W,et al.. High frequency motion compensation system based on PZT actuator ［J］. Infrared and Laser Engineering, 2011,41(3): 539-543. (in Chinese)

[10] LUO J, HUANG CH J, LI H Y, et al.. Design and simulation of a bionic eye based on spherical　　　ultrasonic motor ［J］. The Journal of New Industrialization, 2013,3(7): 98-105.

[11] 卢倩,黄卫清,孙梦馨. 基于柔度比优化设计杠杆式柔性铰链放大机构［J］. 光学 精密工程,2016,24(1): 102-111.

    LU Q, HUANG W Q, SUN M X, Optimization design of amplification mechanism for level flexure hinge based on compliance ratio ［J］. Opt. Precision Eng., 2016,24(1): 102-111.(in Chinese)

[12] 杨志刚,刘登云,吴丽萍,等. 应用于压电叠堆泵的微位移放大机构［J］. 光学 精密工程,2007,15(6): 884-888.

    YANG ZH G, LIU D Y, WU L P, et al.. Micro-displacement magnifying mechanism used in piezo-stack pump ［J］. Opt. Precision Eng., 2007,15(6): 884-888. (in Chinese)

[13] 李会文,吴晖辉,胡俊峰.一种位移放大微动平台的设计和特性分析［J］.机床与液压, 2014,42(15): 101-103.

    LI H W, WU H H, HU J F. Properties analysis and design of a displacement amplification micro-stage ［J］.Machine Tool & Hydraulics, 2014, 42(15): 101-103. (in Chinese)

[14] 马力,谢炜,刘波, 等.柔性铰链微定位平台的设计［J］.光学 精密工程,2014,22(2): 238-245.

    MA L, XIE W, LIU B, et al.. Design of micro-positioning stage with flexure hinge ［J］. Opt. Precision Eng., 2014, 22(2): 238-245. 　　　(in Chinese)

[15] 汪建新,刘曜宁,张玲聪,等. 磁致伸缩换能器辐射板位移放大机构设计［J］.机械设计与制造,2015(3): 201-207.

    WANG J X, LIU Y N, Z HANG L C, et al.. Magnetostrictive transducer radiating plate displacement magnifying mechanism design ［J］.Machinery Design and Manufacture, 2015(3): 201-207. (in Chinese)

[16] 徐志科,鄢珂,金龙. 一种正交型压电位移放大机构的研究［J］. 压电与声光,2009,31(2): 207-209+212.

    XU ZH K, YAN K, JIN L. Research of orthogonal micro-displacement amplifier with piezoelectric actuator ［J］. Piezoelectrics & Acoustooptics, 2009,31(2): 207-209+212. (in Chinese)

[17] 朱华,曹如意,菅磊. 应用于干涉显微镜的直线压电作动器［J］. 光学 精密工程,2013,21(6): 1524-1530.

    ZHU H, CAO R Y, GUAN L. Linear piezoelectric actuator applied to interference microscope ［J］. Opt. Precision Eng., 2013,21(6): 1524-1530. (in Chinese)

[18] 方楚,郭劲,徐新行,等. 适用于FSM系统的菱形微位移放大机构设计［J］. 红外与激光工程,2016,46(10): 170-176.

    FANG CH, GUO J,XU X H, et al.. Design of rhomboid micro stroke amplifier for FSM system ［J］. Infrared and Laser Engineering, 2016,46(10): 170-176.(in Chinese)