[1] CAO T F, JIANG Y Ch. Combining ANSYS and MATLAB to solve the problems of optinum design for reinforced concrete frames[J]. Sichuan Building Science,2009,35(3): 36-38(in Chinese).

[2] ZHOU Ch J, TANG M. Textbook case of Visual Basic programming[M]. Beijing: Higher Education Press,2007: 30-78(in Chinese).

[3] YE X L, SHI Y J. Application ANSYS engineering analysis software[M]. Beijing: Tsinghua University Press,2003: 5-20(in Chinese).

[4] LI M, ZHANG L M. Optimal design of plane frame based on ANSYS[J]. Journal of Henan Normal University(Natural Science Edition),2009,37(5): 146-148(in Chinese).

[5] QIU D R, DONG H Y, LIU J. Program of optimal design for portal frame based on APDL [J]. Steel Construction,2008,23(1): 69-71(in Chinese).

[6] ZHANG X Y, XIONG J, HAO X, et al. Finite element analyses and structure optimal design of the column of a horizontal processing center[J]. Mechanical Science and Technology for Aerospace Engineering,2008,27(12): 1602-1605(in Chinese).

[7] ZHANG R, CHEN Zh Y, YANG Sh M. Optimize and redesign the primary mirror supporting system of space solar telescope[J]. Optical Technique,2007,33(1): 23-26(in Chinese).

[8] ZHAO D B, FAN J, LI G Zh. Topology optimization design of bicycle frame based on ANSYS[J]. Journal of Engineering Design,2009,16(5): 391-394(in Chinese).

[9] ZHANG Sh,WU F Q. The optimum design of ultraviolet polarizing prism of iceland and barium fluoride[J]. Laser Technology,2007,31(3): 285-287(in Chinese).

[10] LI G L, SONG L K, HAO D Zh, et al. Optimal design of rhomb-type achromatism retarder[J]. Laser Technology,2006,30(5): 539-540(in Chinese).

[11] OU P,YAN P, GONG M L, et al. Optimum design of three-position-pumped high-power double-clad fiber lasers[J]. Laser Technology,2007,31(1): 57-60(in Chinese).

[12] SHI G, LIAO Y, WANG Y X, et al. The optimal analysis of Siegman rate equations of passively Q-switched microchip laser[J]. Laser Technology,2005,29(6): 636-638(in Chinese).

[13] CAO X G, ZHOU J Zh, YUAN G D, et al. Orthogonal optimum design of laser peen forming based on finite element simulation[J].Laser Technology,2007,31(6): 656-658(in Chinese).