中国激光, 2009, 36 (s1): 151, 网络出版: 2009-06-18  

基于激光热应力的软质涂层结合强度表征与测试

Characterization and Measurement of Bonding Strength of Soft Coating Based on Laser Thermal Stress
作者单位
1 江苏工业学院低维材料微纳器件与系统研究中心, 江苏 常州 213016
2 江苏大学机械工程学院, 江苏 镇江 212013
3 上海工程技术大学机械工程学院, 上海 201620
4 江苏省镇江市出入境检验检疫局, 江苏 镇江 212013
引用该论文

孔德军, 罗开玉, 张雷洪, 宋广山. 基于激光热应力的软质涂层结合强度表征与测试[J]. 中国激光, 2009, 36(s1): 151.

Kong Dejun, Luo Kaiyu, Zhang Leihong, Song Guangshan. Characterization and Measurement of Bonding Strength of Soft Coating Based on Laser Thermal Stress[J]. Chinese Journal of Lasers, 2009, 36(s1): 151.

参考文献

[1] . 涂层/基体材料界面结合强度测量方法的现状与展望[J]. 力学进展, 2007, 37(1): 67-79.

    . . A review on measurement methods for interfacial bonding strength between coating and substrate[J]. Advances in Mechanics, 2007, 37(1): 67-79.

[2] 殷苏民, 程昌, 冯爱新 等. 界面结合强度的激光划痕综合检测装置的设计[J]. 中国激光, 2008, 35(6): 947~951

    Yin Sumin, Cheng Chang, Feng Aixin et al.. Testing method of the laser scratching based on image acquisition system [J]. Chinese J. Lasers, 2008, 35(6): 947~951

[3] . 涂层与基体界面结合强度测定模型的有限元模拟[J]. 吉林大学学报(工学版), 2007, 37(2): 357-361.

    . . Finite element simulation of a test model for interface bonding strength between coating and substrate[J]. Journal of Jilin University (Engineering and Technology Edition), 2007, 37(2): 357-361.

[4] . 利用应力波测量涂层的结合强度[J]. 兵工学报, 2006, 27(2): 306-309.

    . . Measurement of bond strength of coating using stress wave[J]. Acta Armamentarii, 2006, 27(2): 306-309.

[5] . 纯钛基材上环氧基涂层界面结合强度的研究[J]. 兵器材料科学与工程, 2007, 30(1): 59-62.

    . . Interfacial bonding strength of epoxy coating on pure titanium substrate[J]. Ordnance Material Science and Engineering, 2007, 30(1): 59-62.

[6] . 高斯激光束照射圆柱体-端面上引起温升和热应力的分析[J]. 强度与环境, 2001, 28(3): 14-21.

    . Analysis of the temperature rise and the thermal stress which produced by Gauss laser radiated on an end of the cylinder[J]. Structure & Environment Engineering, 2001, 28(3): 14-21.

[7] . 激光照射圆柱体产生热应力的分布[J]. 应用力学学报, 1999, 16(4): 123-129.

    . . The distribution of the thermal stress in the cylinder produced by the laser radiation[J]. Chinese Journal of Applied Mechanics, 1999, 16(4): 123-129.

[8] 杜少军, 陆启生, 舒柏宏. 激光辐照下铝膜反射镜温升和热应力的计算[J]. 红外与激光工程, 2001, 30(2): 128~131

    Du Shaojun, Lu Qisheng, Shu Bohong. Calculation of laser-induced temperature increment and thermal stress of Al-film reflector [J]. Infrared and Laser Engineering, 2001, 30(2): 128~131

[9] . 基于XRD的镀锌钝化膜残余应力试验研究[J]. 物理学报, 2007, 56(7): 4056-4061.

    . . Experimental study of residual stress of galvanized passive film based on XRD[J]. Acta Physica Sinica, 2007, 56(7): 4056-4061.

[10] . 热喷涂涂层中残余应力分析和检测研究进展[J]. 力学进展, 2002, 32(1): 41-56.

    . . A review of researches on the residual stress in thermal spray coatings[J]. Advances in Mechanics, 2002, 32(1): 41-56.

孔德军, 罗开玉, 张雷洪, 宋广山. 基于激光热应力的软质涂层结合强度表征与测试[J]. 中国激光, 2009, 36(s1): 151. Kong Dejun, Luo Kaiyu, Zhang Leihong, Song Guangshan. Characterization and Measurement of Bonding Strength of Soft Coating Based on Laser Thermal Stress[J]. Chinese Journal of Lasers, 2009, 36(s1): 151.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!