[1] 高培丽.光形限定的照明光学设计研究［D］.江南大学,2015.

    GAO Pei-li. The study of optical design for limited shape lighting［D］. Jiangnan University, 2015.

[2] 颜重光,盛玉林.新一代超薄LED平板灯概述［J］.新材料产业,2015, (07):58-60.

    YAN Chong-guang, SHENG Yu-lin. Overview of a new generation of ultra-thin LED flat lamp［J］. Advanced Materials Industry.2015, (07): 58-60.

[3] 肖箫,文尚胜,陈建龙,等.直下式LED背光源模组第二扩散导光板光学特性分析［J］.光电子.激光, 2013, 24(4): 679-686.

    XIAO Xiao, WEN Shang-sheng, CHEN Jian-long, et al. Optical performance of secondary lightguide-diffusive component in direct LED backlight module［J］. Journal of Optoelectronics·Laser, 2013, 24(4): 679-686.

[4] 陈浩伟,文尚胜,马丙戌,陈颖聪,黄诗敏.基于Taguchi法设计带有圆锥台元件的超薄直下式LED平板灯［J］.光子学报,2015(10) :1022003.

    CHEN Hao-wei, WEN Shang-sheng, MA Bing-xu, et al.Design of super slim direct-down LED panel with tapered optical elements based on Taguchi method［J］.Acta Photonica Sinica,2015(10): 1022003.

[5] 陈俄振,郭震宁,智佳军.LED扩展光源均匀照明的透镜设计［J］. 华侨大学学报(自然科学版),2013, 34(6): 632-633.

    CHEN E-zhen,GUO Zhen-ning,ZHI Jia-jun. Lens design with uniform illumination of the LED extended sources［J］. Journal of Huaqiao University (Natural Scicnce), 2013, 34(6): 632-633.

[6] 孙智慧,常军,赵楠,等.一种新的用于直下式LCD背光源的LED［J］. 光学技术,2007, 33(suppl): 282-284.

    SUN Zhi-hui, CHANG Jun, ZHAO Nan, et al. A novel LED for LCD backlight［J］. Optical Technique, 2007, 33(suppl): 282-284.

[7] 祝振敏,曲兴华,梁海昱,等.基于发光二极管环形阵列与漫反射表面的均匀照明光源研究［J］.光学学报, 2011, 31(1):0115001.

    ZHU Zhen-min, QU Xing-hua, LIANGHai-yu, et al. Uniform illumination study by light-emitting diode ring array and diffuse reflection surface［J］.Acta Optica Sinica, 2011, 31(1): 0115001.

[8] 史晨阳,文尚胜,陈颖聪.基于Taguchi方法的曲面LED阵列照度问题研究［J］.发光学报, 2015, 36(3): 348-354.

    SHI Chen-yang, WEN Shang-shen, CHEN Ying-cong. Study on curved surface LED array illumination problem based on Taguchi method［J］. Chinese Journal of Luminescence, 2015, 36(3): 348-354.

[9] 史晨阳,文尚胜,陈颖聪.基于Taguchi方法的曲面底板LED阵列重影问题研究［J］.发光学报, 2015(06):651-656.

    SHI Chen-yang, WEN Shang-shen, CHEN Ying-cong.Study of surface LED array multi-shadow problem based on Taguchi method［J］. Chinese Journal of Luminescence, 2015(06):651-656.

[10] 兰志勇,杨向宇,王芳媛,等.Taguchi方法在内嵌式正弦波永磁同步电机优化设计中的应用［J］.电工技术学报, 2011, 26(12): 37-42.

    LAN Zhi-yong, YANG Xiang-yu, WANG Fang-yuan, et al. Application for optimal designing of sinusoidal interior permanent magnet synchronous motors by using the Taguchi method［J］. Transactions of China Electrotechnical Society, 2011, 26(12): 37-42.

[11] FANG Yi-Chin, TZENG Yih-Fong, LI Si-Xian. Multi-objective design and extended optimization for developing a miniature light emitting diode pocket-sized projection display［J］. Optical Review, 2008, 15(5): 241-250.

[12] 颜稳萍,郭震宁,林介本,等.直下式LED平板灯的均匀照明设计［J］. 光电子.激光, 2014, 25(10):1878-1885

    YAN Wen-ping, GUO Zhen-ning, LIN Jie-ben,et al. Direct-down LED panel light design for uniform illumination［J］.Journal of Optoelectronics·Laser, 2014, 25(10): 1878-1885.

[13] 陈俄振,郭震宁,智佳军,等.背光源导光板散射网点形状的研究［J］. 激光与光电子学进展, 2013,50(3):161-166.

    CHEN E-zhen,GUO Zhen-ning,ZHI Jia-jun,et al.Study on dot shape for the llight guide plate of back-light［J］. Laser &Optoelectronics Progress, 2013, 50(3): 161-166.

[14] 彭响方,刘婷, 陈金伟.精密注塑成型技术的最新进展［J］.塑料,2004,33(6):79-83.

    PENG Xiang-fang, LIU Ting, CHEN Jin-wei. Recent development of precision injection molding technology［J］.Plastics, 2004, 33(6): 79-83.

[15] 宋满仓, 颜克辉. 薄壁注塑成型数值模拟技术的发展现状［J］. 塑料科技, 2006, 34(1):51-54.

    SONG Man-cang, YAN Ke-hui. Present situations of numerical simulation technology for this wall injection molding［J］. Plastics Science and Technology, 2006, 34(1): 51-54.

[16] 张盛桂.基于PVT特性的精密注塑成型控制机理及设备的研究［D］.北京化工大学,2013.

    ZHANG Sheng-gui. Study on control mechanism and equipment of precision injection molding based on polymer PVT property［D］.Beijing University of Chemical Technology, 2013.

[17] 李天梁, 谭跃刚, 张翔, 等. 受弯件上粘贴型光纤布拉格光栅的应变传递规律［J］. 光学精密工程, 2015, 23(5): 1254-1264.

    LI Tian-liang, TAN Yue-gang, ZHANG Xiang, et al. Strain transfer factors of pasted FBG on bending part surface［J］. Optics and Precision Engineering, 2015, 23(5): 1254-1264.