[1] 丁大钊,叶春堂,赵志祥,等.中子物理学: 原理、方法与应用[M].北京: 原子能出版社, 2001.(Ding Dazhao, Ye Chuntang, Zhao Zhixiang, et al. Neutron physics: principle, method and application. Beijing: Atomic Energy Press, 2001)

[2] 魏宝杰,钟海明.中子管及其应用技术[M].长春: 东北师范大学出版社, 1997: 86-115.(Wei Baojie, Zhong Haiming. Neutron tube technology and its application. Changchun: Northeast Normal University Press, 1997: 86-115)

[3] Sandia National Labs. Science-based solution for NNSA mission needs[R/OL]. http: //www.sandia.gov/pcnsc/research/nnsa-missions.html.

[4] Yushkov G Y, Anders A, Oks E M, et al. Ion velocities in vacuum arc plasmas[J]. J Appl Phys, 2000, 88(10): 5618-5622.

[5] Cheifetz E, Adar U, Davara G. Ions emitted by a pulsed titanium-hydride spark plasma source[C]//17th International Symposium on Discharges and Electrical Insulation in Vacuum. 1996: 194-198.

[6] Chen L, Jin D Z, Cheng L, et al. Ion charge state distribution and ion velocities in the titanium hydride cathodic vacuum arc plasmas[J]. Vacuum, 2011, 86(7): 813-816.

[7] 杨振,彭宇飞,龙继东,等.脉冲离子束作用下靶面次级电子的抑制[J].强激光与粒子束, 2012, 24(9): 2198-2202.(Yang Zhen, Peng Yufei, Long Jidong, et al. Suppression of secondary electrons from target surface under pulsed ion beam bombardment. High Power Laser and Particle Beams, 2012, 24(9): 2198-2202)

[8] 王小胡,杨振,章林文,等.基于二次电子发射的离子束剖面测量[J].强激光与粒子束, 2013, 25(8): 2121-2124.(Wang Xiaohu, Yang Zhen, Zhang Linwen, et al. An ion beam profiler based on secondary electron emission. High Power Laser and Particle Beams, 2003, 25(8): 2121-2124)

[9] 陈思富,夏连胜,章林文,等.强流短脉冲电子束束剖面测量技术[J].强激光与粒子束, 2003, 15(3): 279-282.(Chen Sifu, Xia Liansheng, Zhang Linwen, et al. Measurement technology of beam profile of the high-current short-pulse electron-beam. High Power Laser and Particle Beams, 2003, 15(3): 279-282)

[10] 赵墨田,曹永明,陈刚,等.无机质谱概论[M]. 北京: 化学工业出版社, 2006: 54-129.(Zhao Motian, Cao Yongming, Chen Gang, et al. Introduction to inorganic mass spectrometry. Beijing: Chemical Industry Press, 2006: 54-129)

[11] James F Z. SRIM-2003[J]. Nuclear Instruments and Methods in Physics Research Section B, 2004, 219/220: 1027-1036.