z轴单层行程对激光熔覆成形的影响
王鑫林, 邓德伟, 胡恒, 宋弘韬, 张洪潮. z轴单层行程对激光熔覆成形的影响[J]. 激光技术, 2015, 39(5): 702.
WANG Xinlin, DENG Dewei, HU Heng, SONG Hongtao, ZHANG Hongchao. Effect of single z-increment on laser cladding forming[J]. Laser Technology, 2015, 39(5): 702.
[1] ZHOU X W,WANG X Zh.Application of laser cladding in industrial[J].Journal of Zhongzhou University,2005,22(4):110-111(in Chinese).
[2] ZHONG M,LIU W.Laser surface cladding:the state of the art and challenges[J].Journal of Mechanical Engineering Science,2010,224(5):1041-1060.
[4] ZHONG M L,NING G Q,LIU W J.Research and development on laser direct manufacturing metallic components[J].Laser Technology,2002,26(5):387-391(in Chinese).
[5] LI Ch X,PENG Sh H,XIE P Sh,et al.The principle and application of rapid prototyping technology[J].Journal of Gansu University of Technology,2000,26(3):89-92(in Chinese).
[6] ZHOU Zh T.Application of RPM in modern manufacturing[J].Journal of Compressor Technology,2008(4):17-19(in Chinese).
[7] HUANG W D,LIN X,CHEN J,et al.Laser solid forming technology[M].Xi’an:Northwestern Polytechnical University Press,2007:51-52(in Chinese).
[9] GRIFFITH M L,KEICHER D M,ATWOOD C L,et al.Free form fabrication of metallic components using laser engineered net shaping(LENSTM)[C]//Solid Freeform Fabrication Proceedings.Austin,Texas,USA:University of Texas,1996:125-131.
[10] GE J B,ZHANG A F,LI D Ch,et al.Process research on DZ125L superalloy parts by laser metal direct forming[J].Chinese Journal of Lasers,2011,38(7):41-46(in Chinese).
[12] WANG X Y,JING H,XU W J,et al.Laser cladding forming of are-section inclined thin-walled parts with variable z-increments[J].Chinese Journal of Lasers,2011,38(10):78-84(in Chinese).
[13] WANG X Y,GUO H R,XU W J,et al.Laser cladding forming of a ramp thin wall with variable powder feed rate[J].China Mechanical Engineering,2011,22(6):701-705(in Chinese).
[14] CHRYSSOLOURIS G,ZANNIS S,TSIRBAS K,et al.An experimental investigation of laser cladding[J].CIRP Annals-Maunfactu-ring Technology,2002,51(1):145-148.
[15] LEE H K.Effect of the cladding parameters on the deposition efficiency in pulsed Nd:YAG laser cladding[J].Journal of Materials Processing Technology,2008,202 (1/3):321-327.
王鑫林, 邓德伟, 胡恒, 宋弘韬, 张洪潮. z轴单层行程对激光熔覆成形的影响[J]. 激光技术, 2015, 39(5): 702. WANG Xinlin, DENG Dewei, HU Heng, SONG Hongtao, ZHANG Hongchao. Effect of single z-increment on laser cladding forming[J]. Laser Technology, 2015, 39(5): 702.