[1] 黄秋实, 李良琦, 高彬彬. 国外金属零部件增材制造技术发展概述[J]. 国防制造技术, 2012( 5): 28- 31.

    Huang QS, Li LQ, Gao BB. Development of metalworking material for foreign metal parts[J]. Defense Manufacturing Technology, 2012( 5): 28- 31.

[2] 林鑫, 黄卫东. 高性能金属构件的激光增材制造[J]. 中国科学: 信息科学, 2015, 45(9): 1111-1126.

    Lin X, Huang W D. Laser additive manufacturing of high-performance metal components[J]. Scientia Sinica (Informationis), 2015, 45(9): 1111-1126.

[3] Griffith ML, Keicher DM, Atwood CL, et al. Free form fabrication ofmetallic components using laser engineerednet shaping (LENS)[C]. Austin: Solid Freeform Fabrication Symposium, 1996.

[4] Griffith M L, Schliengera ME, Harwella L D, et al. Understanding thermalbehavior in the LENS process[J]. Materials & Design, 1999, 20(2/3): 107-113.

[5] Gaumann M, Henry S, Cleton F, et al. Epitaxial laser metal forming: Analysis of microstructure formation[J]. Materials Science and Engineering: A, 1999, 271(1/2): 232-241.

[6] 宁国庆, 钟敏霖, 杨林, 等. 激光直接制造金属零件过程的闭环控制研究[J]. 应用激光, 2002, 22(2): 172-176.

    Ning G Q, Zhong M L, Yang L, et al. Research about close-loop control system during laser direct manufacturing metallic components[J]. Applied Laser, 2002, 22(2): 172-176.

[7] 黄卫东, 李延民, 冯莉萍, 等. 金属材料激光立体成形技术[J]. 材料工程, 2002, 3(10): 40-43.

    Huang W D, Li Y M, Feng L P, et al. Laser solid forming of metal powdermaterials[J]. Journal of Materials Engineering, 2002, 3(10): 40-43.

[8] 葛江波, 张安峰, 李涤尘, 等. 激光金属直接成形DZ125L高温合金零件工艺的研究[J]. 中国激光, 2011, 38(7): 0703004.

    Ge J B, Zhang A F, Li D C, et al. Process research on DZ125L super alloy parts by laser metal direct forming[J]. Chinese Journal of Lasers, 2011, 38(7): 0703004.

[9] 张安峰, 李涤尘, 梁少端, 等. 高性能金属零件激光增材制造技术研究进展[J]. 航空制造技术, 2016( 22): 16- 22.

    Zhang AF, Li DC, Liang SD, et al. Research progress of high-performance metal parts laser gain manufacturing technology[J]. Aeronautical Manufacturing Technology, 2016( 22): 16- 22.

[10] Choi S, Bieler T R, Lucas J P, et al. Characterization of the growth of intermetallic interfacial layers of Sn-Ag and Sn-Pb eutectic solders and their composite solders on Cu substrate during isothermal long-term aging[J]. Journal of Electronic Materials, 1999, 28(11): 1209-1215.

[11] KestenbaumA, Serafino A J. Electrical conductor deposition method: US5064685A[P].1991-11-12.

[12] Amey DI, Horowitz SJ. Materials performance at frequencies up to 20 GHz[C]. Tokyo: International Electronic Manufacturing Symposium and the International Microelectronics Conference, 1998: 331- 336.

[13] Wang T, Li Y X, Yao J Q, et al. The duoble-ended 750 nm and 532 nm laser output from PPLN-FWM[J]. Chinese Physics Letters, 2013, 30(6): 064203.

[14] 邓宗全. 间折展机构设计[M]. 哈尔滨: 哈尔滨工业大学出版社, 2013.

    Deng ZQ. Design of interdisciplinary institutions[M]. Harbin: Harbin Institute of Technology Press, 2013.

[15] 卢冯昕, 饶晓雷, 李纲. 粘结钕铁硼永磁体的应用和发展[J]. 稀土信息, 2013, 346(1): 19-21.

    Lu F X, Rao X L, Li G. Application and development of bonded NdFeB permanent magnets[J]. Rare Earth Information, 2013, 346(1): 19-21.

[16] 秦兰兰, 陈长军, 张敏, 等. Zr对激光增材制备镁合金组织及性能的影响[J]. 应用激光, 2016, 36(4): 391-396.

    Qin L L, Chen C J, Zhang M, et al. Effect of Zr on microstructure and properties of magnesium alloy prepared by laser[J]. Applied Laser, 2016, 36(4): 391-396.

[17] 李建奇. 高温烧结钕铁硼磁体的制备及性能研究[D]. 广州: 华南理工大学, 2012: 121- 124.

    Li JQ. Preparation and properties of high temperature sintered NdFeB magnet[D]. Guangzhou: South China University of Technology, 2012: 121- 124.

[18] 王霄, 王东生, 高雪松, 等. 轻合金构件激光增材制造研究现状及其发展[J]. 应用激光, 2016, 36(4): 478-483.

    Wang X, Wang D S, Gao X S, et al. Research status and development in laser additive manufacturing of light alloy components[J]. Applied Laser, 2016, 36(4): 478-483.