激光快速成形304不锈钢试件组织与拉伸断口特性分析
余金水, 邱长军, 周炬, 何彬, 樊湘芳. 激光快速成形304不锈钢试件组织与拉伸断口特性分析[J]. 激光与光电子学进展, 2012, 49(1): 011402.
Yu Jinshui, Qiu Changjun, Zhou Ju, He Bin, Fan Xiangfang. Analysis on Microstructure and Tensile Fracture Characteristic of 304 Stainless Steel Specimens Made by Laser Rapid Forming[J]. Laser & Optoelectronics Progress, 2012, 49(1): 011402.
[1] 姬生钦, 李鹏, 曾晓雁. 激光熔覆直接制造金属零件的组织及力学性能分析[J]. 激光技术, 2006, 30(2): 130~132
[2] Xue Chunfang, Dai Yao, Tian Xinli. Laser engineered net shaping of Co-based superalloys[J]. Transaction of Nonferrous Metals Society of China, 2006, 16(23): s1982~s1985
[3] M. Gaumann, C. Bezencon, P. Canalis et al.. Single-crystal laser deposition of superalloys: processing-microstructure map[J]. Acta Mater., 2001, 49(6): 1051~1062
[4] 李鹏. 基于激光熔覆的三维金属零件激光直接制造技术研究[D]. 武汉: 华中科技大学, 2005
Li Peng. Direct Laser Fabrication of 3-Dimentional Metal Parts Based on Laser Cladding[D]. Wuhan: Huazhong University of Science and Technology, 2005
[5] 贾文鹏, 林鑫, 陈静 等. 空心叶片激光快速成形过程的温度/应力场数值模拟[J]. 中国激光, 2007, 34(9): 1308~1322
[6] 王华明, 张凌云, 李安 等. 先进材料与高性能零件快速凝固激光加工研究进展[J]. 世界科技研究与发展, 2004, 26(3): 27~31
Wang Huaming, Zhang Lingyun, Li An et al.. Process on rapid solidification laser processing for advanced materials and components[J]. World Sci-Tech R&D, 2004, 26(3): 27~31
[7] 杨健, 黄卫东, 陈静 等. 激光快速成形金属零件的残余应力[J]. 应用激光, 2004, 24(1): 5~8
[8] A. Plati. Residual stress generation during laser cladding of steel with a particulate metal matrix composite[J]. Advanced Engineering Materials, 2006, 8(7): 619~623
[9] U. de Oliveira. Microstresses and microstructure in thick cobalt-based laser deposited coating[J]. Surface and Coatings Technology, 2007, 201(14): 6363~7124
[10] 昝林, 陈静, 林鑫 等. 激光快速成形TC21钛合金沉积态组织研究 [J]. 稀有金属材料与工程, 2007, 36(4): 612~616
Zan Lin, Chen Jing, Lin Xin et al.. Research on microstructures of deposited TC21 titanium alloy by laser rapid forming[J]. Rare Metal Materials and Engineering, 2007, 36(4): 612~616
[11] X. H. Wu, J. Liang, J. Mei et al.. Microstructures of laser-deposited Ti-6Al-4V[J]. Materials and Design, 2004, 25(2): 137~144
[12] 陈静, 林鑫, 王涛 等. 316L不锈钢激光快速成形过程中熔覆层的热裂机理[J]. 稀有金属材料与工程, 2003, 32(3): 183~186
Chen Jing, Lin Xin, Wang Tao et al.. Hot tearing mechanism of 316L stainless steel cladding layers in process of laser rapid forming[J]. Rare Metal Materials and Engineering, 2003, 32(3): 183~186
[13] 宋建丽, 邓琦林, 胡德金 等. 激光熔覆成形316L不锈钢组织的特征与性能[J]. 中国激光, 2005, 32(10): 1441~1444
余金水, 邱长军, 周炬, 何彬, 樊湘芳. 激光快速成形304不锈钢试件组织与拉伸断口特性分析[J]. 激光与光电子学进展, 2012, 49(1): 011402. Yu Jinshui, Qiu Changjun, Zhou Ju, He Bin, Fan Xiangfang. Analysis on Microstructure and Tensile Fracture Characteristic of 304 Stainless Steel Specimens Made by Laser Rapid Forming[J]. Laser & Optoelectronics Progress, 2012, 49(1): 011402.