[1] 黄传勇, 孙淑珍, 张中太. 生物陶瓷复合材料的研究[J]. 中国生物医学工程学报, 2000, 19(3): 281-287.(Huang Chuanyong, Sun Shuzhen, Zhang Zhongtai. Study on bioceramic composite materials. Chinese Journal of Biomedical Engineering, 2000, 19(3): 281-287)

[2] 余鑫萌, 徐宝奎, 袁发得. 二氧化锆的稳定化及其应用[J]. 中国材料进展, 2007, 26(1): 28-32.(Yu Xinmeng, Xu Baokui, Yuan Fade. Stabilizing and applications of zirconia. Materials China, 2007, 26(1): 28-32)

[3] 张鑫, 彭浩然, 张春鸣, 等. 纳米氧化锆热障涂层高温性能演变研究[J]. 热喷涂技术, 2012, 4(4): 15-19.(Zhang Xin, Peng Haoran, Zhang Chunming, et al. Evolution of high-temperature properties for nano-zirconia thermal barrier coating. Thermal Spray Technology, 2012, 4(4): 15-19)

[4] Zinatloo-Ajabshir S, Salavati-Niasari M. Facile route to synthesize zirconium dioxide (ZrO2) nanostructures: Structural, optical and photocatalytic studies[J]. Journal of Molecular Liquids, 2016, 216: 545-551.

[5] 刘晃清, 王玲玲, 秦伟平. 二氧化锆纳米材料中Eu3+的发光特性[J]. 物理学报, 2004, 53(1): 282-285.(Liu Huangqing, Wang Lingling, Qin Weiping. Luminescence of Eu3+ ons in nanocrystalline zirconia. Acta Physica Sinica, 2004, 53(1): 282-285)

[6] Song Y Q, He D H, Xu B Q. Effects of preparation methods of ZrO2 support on catalytic performances of Ni/ZrO2 catalysts in methane partial oxidation to syngas[J]. Applied Catalysis A General, 2008, 337(1): 19-28.

[7] Renuka L, Anantharaju K S, Sharma S C, et al. A comparative study on the structural, optical, electrochemical and photocatalytic properties of ZrO2 nanooxide synthesized by different routes[J]. Journal of Alloys & Compounds, 2017, 695: 382-395.

[8] 李世文, 冯国英, 李玮, 等. 电爆炸制备纳米铜粉及物相研究[J]. 强激光与粒子束, 2013, 25(9): 2408-2412.(Li Shiwen, Feng Guoying, Li Wei, et al. Preparation and phase analysis of Cu nano-powder by electrical explosion. High Power Laser and Particle Beams, 2013, 25(9): 2408-2412)

[9] Bagazeev A V, Kotov Y A, Medvedev A I, et al. Characteristics of ZrO2 nanopowders produced by electrical explosion of wire[J]. Nanotechnologies in Russia, 2010, 5(9/10): 656-664.

[10] 李世文, 冯国英, 李玮, 等. 高压击穿铜丝物相研究[J]. 物理学报, 2012, 61: 225206.(Li Shiwen, Feng Guoying, Li Wei, et al. Study on phase analysis of nanoparticles by high-voltage electrical explosion method of copper wire. Acta Physica Sinica, 2012, 61: 225206)

[11] Peng C, Wang J, Zhou N, et al. Fabrication of nanopowders by electrical explosion of a copper wire in water[J]. Current Applied Physics, 2016, 16(3): 284-287.

[12] 伍友成, 邓建军, 郝世荣, 等. 电爆炸丝法制备纳米Al2O3粉末[J]. 强激光与粒子束, 2005, 17(11): 1753-1756.(Wu Youcheng, Deng Jianjun, Hao Shirong, et al. Synthesis of Al2O3 nanopowders by electrical explosion of wires. High Power Laser and Particle Beams, 2005, 17(11): 1753-1756)

[13] Yanuka D, Kozlov M, Zinowits H E, et al. Convergence of shock waves generated by underwater electrical explosion of cylindrical wire arrays between different boundary geometries[J]. Physics of Plasmas, 2015, 22: 085004.

[14] Cho C, Choi Y W, Kang C, et al. Effects of the medium on synthesis of nanopowders by wire explosion process[J]. Applied Physics Letters, 2007, 91(14): 155.

[15] 刘隆晨, 赵军平, 张禹, 等. 氩气中铝丝电爆炸沉积能量对制备铝纳米粉体特性的影响[J]. 强激光与粒子束, 2016, 28: 105006.(Liu Longchen, Zhao Junping, Zhang Yu, et al. Effect of deposited energy of wire electrical explosion in argon on characteristics of synthesized aluminum nanopowder. High Power Laser and Particle Beams, 2016, 28: 105006)

[16] Lee Y S, Bora B, Yap S L, et al. Effect of ambient air pressure on synthesis of copper and copper oxide nanoparticles by wire explosion process[J]. Current Applied Physics, 2011, 12(1): 199-203.

[17] 周晟阳, 冯国英, 李玮, 等. 电爆炸法制备Fe3O4纳米颗粒及其物相研究[J]. 强激光与粒子束, 2016, 28: 084101.(Zhou Shengyang, Feng Guoying, Li Wei, et al. Phase analysis of Fe3O4 nanoparticles produced by electrical explosion of iron wire. High Power Laser and Particle Beams, 2016, 28: 084101)