[1] 纪峥,邓可顺,喻永声,等.内压柱壳在激光束照射下热爆破数值模拟[J]. 应力力学学报, 2000, 17(1):23-28.
Ji Z, Deng K S, Yu Y S, et al. The thermal failure numerical simulation of internally pressured cylinder shell irradiated by laser. Journal of Applied Mechanics, 2000,17(1):23-28

[2] 纪峥,刘永刚.激光束照射下内压柱壳热爆破数值模拟[J].强激光与粒子束,1996, 8(1):99-104.
Ji Z, Liu Y G. A thermal failure numerical model of internally pressured cylinder shell under laser irradiation. High Power Laser and Particle Beams, 1996, 8(1):99-104

[3] 赵剑衡, 章冠人,刘绪发. 激光辐照下充压柱壳结构变形的数值模拟[J]. 高压物理学报,1996, 10(4):262-268.
Zhao J H, Zhang G R, Liu X F. A numerical simulation to the deformation of an internally pressured cylinder tank under intensive laser irradiation. Chinese Journal of High Pressure Physics, 1996, 10(4):262-268

[4] Li S, Cheng Y, Zhang G, et al. The failure of shells subjected to internal pressure and irradiated by CW CO2 laser beam[A]. Proc of AIAA[C]. 1994. 2641-2646.

[5] Chen Y Z. Dynamics thermal failure of the structures under laser irradiation[A]. Proc of TUTAM Symop on Impact Dyn[C]. Beijing: Peking University Press, 1994. 92-104.

[6] 谭福利,赵剑衡,李永池. 激光辐照下充压柱壳热断裂的可能性分析[J]. 强激光与粒子束, 2004, 16(8):977-980.
Tan F L, Zhao J H, Li Y C. Probability analysis on thermal fracture of the internally pressured cylinder shell irradiated by laser. High Power Laser and Particle Beams, 2004, 16(8):977-980

[7] 王伟平, 刘绪发,刘常龄. 连续波激光辐照下金属材料的二维非线性温度场研究[J].高压物理学报,1996, 10(4):269-274.
Wang W P, Liu X F, Liu C L. An investigation on CW laser induced two-dimensional nonlinear temperature field of metals. Chinese Journal of High Pressure Physics,1996, 10(4):269-274

[8] 袁红,赵剑衡,谭福利,等. 激光辐照下旋转柱壳温度场的数值模拟[J]. 强激光与粒子束,2005, 17(5):681-684.
Yuan H, Zhao J H, Tan F L, et al. Numerical simulation of the temperature distribution on a rotational cylindrical shell under laser irradiation. High Power Laser and Particle Beams, 2005, 17(5):681-684

[9] 工程材料实用手册编缉委 被 工程材料实用手册[M].北京:中国计量出版社,1988. 208.
The Editing Committee of Engineering Material Applied Manual. Engineering material practical manual. Beijing: Chinese Metrology Press, 1988