[1] Ishibashi S, Ota Y, Nakamura K. Low resistivity indium-tin oxide transparent conductive films. II. Effect of sputtering voltage on electrical property of films. J. Vac. Sci. Technol., 1990, A8(3):1403～1406

[2] Kojima M, Kato H, Imai A et al.. Electronic conduction of tin oxide thin films prepared by chemical vapor deposition. J. Appl. Phys., 1988, 64(4):1902～1905

[3] Chaudhuri U, Ramkumar K, Satyam M. Electrical conduction in a tin-oxide-silicon interface prepared by spray phrolysis. J. Appl. Phys., 1989, 66(4):1748～1752

[4] Manifacier J C. Thin metallic oxides as transparent coductors. Thin Solid Films, 1982, 90(3):297～308

[5] Kumazawa S, Shibutani S, Nishio T et al.. 15.1% highly efficient thin film CdS/CdTe solar cell. Sollar Energy Materials and Solar Cells, 1997, 49(1～4):205～212

[6] Meng L J, Dos Santos M P. Properties of indium tin oxide films prepared by rf reactive magnetron sputtering at different substrate temperature. Thin Solid Films, 1998, 322(1/2):56～62

[7] Kobayashi H, Ishida T, Nakamura K et al.. Properties of indium tin oxide films prepared by the electron beam evaporation method in relation to characteristics of indium tin oxide/silicon oxide/silicon junction solar cells. J. Appl. Phys., 1992,
72(11):5288～5293

[8] Maruyama T, Fukui K. Indium-tin oxide thin films prepared by chemical vapor deposition. J. Appl. Phys., 1991, 70(7):3848～3851

[9] Xu Jianhua, Lu Xingze, Zhou Guangpeng et al.. Electric field induced molecular reorientation in stilbazolium salt Langmuir-Blodgett monolayers. Thin Solid Films, 1998, 312(1/2):295～299

[10] Meng Lijian, dos Santos M P. Properties of indium tin oxide (ITO) films prepared by r.f. rective magnetron sputtering at different pressures. Thin Solid Films, 1997, 303(1/2):151～155