[1] 杨洁颖, 吕毅, 张春波, 等. 飞行器用透波材料及天线罩技术研究进展[J]. 宇航材料工艺, 2015, 45(4): 6-9.

    Yang J Y, Lü Y, Zhang C B, et al. Improvements of microwave transparent composites and aircraft radome[J]. Aerospace Materials & Technology, 2015, 45(4): 6-9.

[2] 李仲平. 热透波机理及热透波材料进展与展望[J]. 中国材料进展, 2013, 32(4): 193-202.

    Li Z P. Major advancement and development trends in study of hot-wall microwave-transparency mechanisms and high-temperature microwave-transparent materials[J]. Materials China, 2013, 32(4): 193-202.

[3] 吴臣武, 黄晨光, 陈光南. 局部热载荷诱导热障涂层界面分层断裂问题[J]. 中国科学: 技术科学, 2011, 41(1): 49-54.

    Wu C W, Huang C G, Chen G N. Interface delamination of the thermal barrier coating subjected to local heating[J]. Scientia Sinica: Technological, 2011, 41(1): 49-54.

[4] 陈卓, 张晖, 袁端鹏, 等. 基于CO2连续激光器模拟的氮化物填充聚四氟乙烯复合材料耐烧蚀性能[J]. 复合材料学报, 2015, 32(5): 1279-1285.

    Chen Z, Zhang H, Yuan D P, et al. Ablation resistance property of nitride filled polytetraflouroethylene composites based on CO2 continuous laser simulation[J]. Acta Materiae Compositae Sinica, 2015, 32(5): 1279-1285.

[5] YamamotoR, ParkerJ, BoleyC, et al. Laser-material interaction studies utilizing the solid-state heat capacity laser[C]∥20 th Annual Solid State and Diode Laser Technology Review, 2007.

[6] 赵伟娜, 黄亿辉, 宋宏伟, 等. 高功率连续激光辐照CFRP层合板热力破坏效应多尺度分析模型[J]. 中国激光, 2017, 44(6): 0602003.

    Zhao W N, Huang Y H, Song H W, et al. Multi-scale analysis model of thermal-mechanical damage effect in high-power continuous-wave laser irradiation of CFRP laminates[J]. Chinese Journal of Lasers, 2017, 44(6): 0602003.

[7] 于冬洋, 王续跃. 单层碳纤维复合材料激光多向切割的温度场模拟[J]. 激光与光电子学进展, 2017, 54(11): 111409.

    Yu D Y, Wang X Y. Temperature field simulation of single-layer carbon fiber reinforced plastics in multi-directional laser cutting[J]. Laser & Optoelectronics Progress, 2017, 54(11): 111409.

[8] 彭国良, 杜太焦, 刘峰, 等. 激光烧蚀玻璃纤维/环氧树脂复合材料的能量耦合率模拟研究[J]. 中国激光, 2014, 41(2): 0203001.

    Peng G L, Du T J, Liu F, et al. Simulation study of laser energy coupling coefficient in the process of ablating glass fiber/epoxy composites[J]. Chinese Journal of Lasers, 2014, 41(2): 0203001.

[9] 刘凯, 陈斌, 戴剑雄, 等. 环境因素对玻璃纤维增强环氧树脂基透波复合材料性能的影响[J]. 工程塑料应用, 2010, 38(10): 64-67.

    Liu K, Chen B, Dai J X, et al. Effect of environment factors on properties of glass fiber reinforced epoxy resin wave-transparent composites[J]. Engineering Plastics Application, 2010, 38(10): 64-67.

[10] 郭玉明, 颜鸿斌, 凌英, 等. 低密度烧蚀防热透波多功能复合材料的研究[J]. 玻璃钢/复合材料, 2001( 5): 33- 36.

    Guo YM, Yan HB, LingY, et al. Study of multi-function composites with low density ablation heat protection and wave transmition[J]. Fiber Reinforced Plastics/composite, 2001( 5): 33- 36.

[11] 王立君, 刘峰, 谌立新, 等. 玻璃钢激光烧蚀的微波透射性能研究[J]. 功能材料, 2010, 41(1): 39-41, 46.

    Wang L J, Liu F, Chen L X, et al. Investigation on the microwave transmission change of the laser ablation glass-fiber resin composite[J]. Journal of Functional Materials, 2010, 41(1): 39-41, 46.

[12] 宫兆合, 刘建华. 核辐射对透波材料介电性能影响[J]. 北京航空航天大学学报, 2007, 33(8): 991-993.

    Gong Z H, Liu J H. Effect of nuclear radiation on dielectric properties of wave-transmitting materials[J]. Journal of Beijing University of Aeronautics and Astronautics, 2007, 33(8): 991-993.

[13] 陈薄, 古忠涛. 导电炭黑微观结构及其应用性能[J]. 强激光与粒子束, 2015, 27(8): 287-292.

    Chen B, Gu Z T. Microstructure and application of conductive carbon black[J]. High Power Laser and Particle Beams, 2015, 27(8): 287-292.

[14] 朱永法, 宋瑞隆, 姚文清, 等. 材料分析化学[M]. 北京: 化学工业出版社, 2009: 78- 81.

    Zhu YF, Song RL, Yao WQ, et al.Analytical chemistry of materials[M]. Beijing: Chemistry Industry Press, 2009: 78- 81.