基于温度变化的涂覆型熔锥光纤传输特性
傅海威, 许士超, 乔学光, 刘颖刚, 周红, 雒明世, 邱淑伟. 基于温度变化的涂覆型熔锥光纤传输特性[J]. 中国激光, 2012, 39(3): 0305001.
Fu Haiwei, Xu Shichao, Qiao Xueguang, Liu Yinggang, Zhou Hong, Luo Mingshi, Qiu Shuwei. Coated and Tapered Fiber Transmission Characteristics Based on Temperature Variation[J]. Chinese Journal of Lasers, 2012, 39(3): 0305001.
[1] M. Lehtonen, G. Genty, H. Ludvigsen. Tapered microstructured fibers for efficient coupling to optical waveguides: a numerical study[J]. Appl. Phys. B, 2005, 81(2): 295~300
[2] 游善红, 李新碗, 殷宗敏 等. 基于熔融拉锥技术的全光纤粗波分复用器[J]. 通信技术, 2002, (12): 3~5
You Shanhong, Li Xinwan, Yin Zongmin et al.. CWDM passive components fabricated by FBT[J]. Communications Technology, 2002, (12): 3~5
[3] Zhaobing Tian, Scott S.-H. Yam, Jack Barneset et al.. Refractive index sensing with Mach-Zehnder interferometer based on concatenating two single-mode fiber tapers[J]. IEEE Photon. Technol. Lett., 2008, 20(8): 626~628
[4] J. Villatoro, V. P. Minkovich, D. Monzón-Hernández. Temperature-independent strain sensor made from tapered holey optical fiber[J]. Opt. Lett., 2006, 31(3): 305~307
[5] D. Monzón-Hernández, V. P. Minkovich, J. Villatoro. High-temperature sensing with tapers made of microstructured optical fiber[J]. IEEE Photon. Technol. Lett., 2006, 18(3): 511~513
[6] Benye Li, Lan Jiang, Sumei Wang et al.. Ultra-abrupt tapered fiber Mach-Zehnder interferometer sensors[J]. Sensors, 2011, 11(6): 5729~5739
[7] 陈智浩, 顾东华, 彭江得 等. 双锥光纤模拟理论方法[J]. 光学学报, 1999, 19(11): 1549~1555
[8] 赵楚军, 范滇元, 周萍 等. 锥形光纤的功率分布特性[J]. 中国激光, 2008, 35(3): 422~425
[9] 熊贻坤, 黄旭光. 基于熔融拉锥光纤的液体折射率传感器[J]. 光学学报, 2009, 29(7): 1956~1960
[10] 廖延彪. 光纤光学原理与应用[M]. 北京: 清华大学出版社, 2010. 41~47
Liao Yanbiao. Fiber Optics: Principles and Applications[M]. Beijing: Tsinghua University Press, 2010. 41~47
[11] 延凤平, 张良忠, 单英 等. 基于平方律和阶跃型纤芯折射率分布下光纤模场半径的数值分析[J]. 光学技术, 2000, 26(1): 66~70
Yan Fengping, Zhang Liangzhong, Shan Ying et al.. Numerical analysis of the mode filed radius for the square law and step index field[J]. Optical Technique, 2000, 26(1): 66~70
[12] J. B. Rosolem, A. A. Juriollo, M. A. Romero. S-band EDFA using standard erbium-doped fiber[J]. Electron. Lett., 2007, 43(22): 1186~1188
[13] Hirotaka Ono, Makoto Yamada, Makoto Shimizu. S-band erbium-doped fiber amplifiers with a multistage configuration: design, characterization, and gain tilt compensation[J]. J. Lightwave Technol., 2003, 21(10): 2240~2246
傅海威, 许士超, 乔学光, 刘颖刚, 周红, 雒明世, 邱淑伟. 基于温度变化的涂覆型熔锥光纤传输特性[J]. 中国激光, 2012, 39(3): 0305001. Fu Haiwei, Xu Shichao, Qiao Xueguang, Liu Yinggang, Zhou Hong, Luo Mingshi, Qiu Shuwei. Coated and Tapered Fiber Transmission Characteristics Based on Temperature Variation[J]. Chinese Journal of Lasers, 2012, 39(3): 0305001.