[1] Green M A. The passivated emitter and rear cell (PERC): From conception to mass production[J]. Progress in Photovoltaics Research & Applications, 2015, 143: 190-197.

[2] Kim M, Kim D, Kim D, et al. Analysis of laser-induced damage during laser ablation process using picosecond pulse width laser to fabricate highly efficient PERC cells[J]. Solar Energy, 2014, 108: 101-106.

[3] Lin D, Abbott M, Lu P H, et al. Incorporation of deep laser doping to form the rear localized back surface field in high efficiency solar cells[J]. Solar Energy Materials & Solar Cells, 2014, 130: 83-90.

[4] 王春梅. 硼扩散片制备技术研究[D]. 天津: 天津大学, 2008: 13-16.

    Wang Chunmei. Study on boron diffused silicon wafers[D]. Tianjin: Tianjin University, 2008: 13-16.

[5] Kluska S, Granek F. High-efficiency silicon solar cells with boron local back surface fields formed by laser chemical processing[J]. IEEE Electron Device Letters, 2011, 32(9): 1257-1259.

[6] Das A, Kim D S, Nakayashiki K, et al. Boron diffusion with boric acid for high efficiency silicon solar cells[J]. Journal of the Electrochemical Society, 2010, 157(6): 684-687.

[7] Vinodkumar M, Korot K, Limbachiya C, et al. Screening-corrected electron impact total and ionization cross sections for boron trifluoride (BF3) and boron trichloride (BCl3)[J]. Journal of Physics B, 2008, 41(24): 245202.

[8] Kim M, Kim D, Kim D, et al. Impact of laser pulse width on laser ablation process of high performance PERC cells[J]. Solar Energy, 2014, 110: 208-213.

[9] 刘春阳， 孙立东， 傅星， 等. 355 nm 纳秒脉冲激光在硅表面照射形成微结构及其荧光检测[J]． 中国激光， 2010， 37(8)： 2139-2142.

    Liu Chunyang, Sun Lidong, Fu Xing, et al. Si microstructure fabricated by 355 nm nanosecond pulsed laser and its fluorescence microscopy study[J]. Chinese J Lasers, 2010, 37(8): 2139-2142.

[10] 王克甫， 张秋慧. 高能纳秒激光烧蚀单晶硅的微观结构[J]. 激光杂志, 2012, 33(5): 36-37.

    Wang Kefu, Zhang Qiuhui. The ablation microstructures of mono crystalline silicon by high power nanosecond laser[J]. Laser Journal, 2012, 33(5): 36-37.

[11] Bhr M, Heinrich G, Stolberg K P, et al. Ablation of dielectrics without substrate damage using ultra-short-pulse laser systems[C]. Proceedings of the 25th EUPVSEC, Valencia, 2010: 2490-2496.

[12] 杨焕， 黄珊， 段军， 等. 飞秒与纳秒激光刻蚀单晶硅对比研究[J]. 中国激光, 2013, 40(1): 0103003.

    Yang Huan, Huang Shan, Duan Jun, et al. Contrastive study on laser ablation of single-crystal silicon by 1030 nm femtosecond laser and 355 nm nanosecond laser[J]. Chinese J Lasers, 2013, 40(1): 0103003.

[13] 金方圆， 陈波， 鄂书林， 等. 皮秒激光烧蚀Al膜的理论分析与实验验证[J]. 发光学报, 2014, 35(6): 754-760.

    Jin Fangyuan, Chen Bo, E Shulin, et al. Theory analysis and experiment verification on picosecond laser ablation of Al film[J]. Chinese Journal of Luminescence, 2014, 35(6): 754-760.

[14] 侯敏. 短脉冲及超短脉冲激光硅表面微加工研究[D]. 天津: 天津大学, 2008: 9-22.

    Hou Min. Study of micromachining on silicon using short and ultrashort laser pulse[D]. Tianjin: Tianjin University, 2008: 9-22.

[15] Goldstein A N. The melting of silicon nanocrystals: Submicron thin-film structures derived from nanocrystal precursors[J]. Applied Physics A, 1996, 62(1): 33-37.

[16] 董世运， 马运哲， 徐滨士， 等. 激光熔覆材料研究现状[J]. 材料导报, 2006, 20(6): 5-9.

    Dong Shiyun, Ma Yunzhe, Xu Binshi, et al. Current status of material for laser cladding[J]. Materials Review, 2006, 20(6): 5-9.

[17] Hong J, Wang W, Shi B, et al. Screen-printed Si paste for localized B doping in a back surface field[J]. IEEE Electron Device Letters, 2015, 36(1): 8-10.

[18] 刘强， 李扬聪， 周昕， 等. 激光脉冲输出能量与脉冲宽度相互关系特性实验研究[J]. 激光杂志, 2009, 30(1): 20-21.

    Liu Qiang, Li Yangcong, Zhou Xin, et al. Study the relationship characteristic between laser′ s signal pulse energy and skeleton in experiment[J]. Laser Journal, 2009, 30(1): 20-21.

[19] 李俊昌. 激光的衍射及热作用计算[M]. 北京： 科学出版社， 2002: 58-68.

[20] 陈家璧， 彭润玲. 激光原理及应用[M]. 北京： 电子工业出版社， 2010: 63-69.

[21] 鲍钢飞. 基础物理学[M]. 北京： 高等教育出版社， 2007: 420-430.