[1] 吴东江,马广义,曹先锁 等. 脉冲激光弯曲成形技术中硅片表面的形貌分析[J]. 中国激光, 2007, 34(11):1589～1593

    Wu Dongjiang, Ma Guangyi, Cao Xiansuo et al.. Analysis of silicon surface profile of pulsed laser bending processing [J]. Chinese J. Lasers, 2007, 34(11):1589～1593

[2] . Geiger, M. Merklein, M. Pitz. Laser and forming technology — an idea and the way of implementation[J]. Journal of Materials Processing Technology, 2004, 151: 3-11.

[3] 李纬民,Manfred Geiger, Frank Vollertsen. 金属板材激光弯曲成形规律的研究[J]. 中国激光, 1998, A25(9):859～864

    Li Weimin, Manfred Geiger, Frank Vollertsen. Study on laser bending of metal sheets [J]. Chinese J. Lasers, 1998, A25(9):859～864

[4] . Richard Zhang, Xianfan Xu. Laser bending for high-precision curvature adjustment of microcantilevers[J]. Appl. Phys. Lett., 2005, 86(2): 021114.

[5] . Richard Zhang, Xianfan Xu. High precision microscale bending by pulsed and CW lasers[J]. ASME, 2003, 125: 512-518.

[6] G. Dearden, C. Taylor, K. Bartkowiak. An experimental study of laser micro-forming using a pulsed Nd∶YAG laser and scanning optics [C]. Processing of the 21st International Congress on application of Laser and Electro-Optics, 2003, M409:1～10

[7] . Vollertsen, I. Komel, R. Kals. The laser bending of steel foils for microparts by the buckling mechanism — a model[J]. Modelling Simul. Mater. Sci. Eng., 1995, 3: 107-119.

[8] 管延锦,孙胜,赵国群 等. 预约束应力作用下的激光弯曲成形仿真工艺研究[J]. 中国激光, 2002, A29(8):755～758

    Guan Yanjin, Sun Sheng, Zhao Guoqun et al.. Simulation of the laser bending process of sheet metals with pre-stresses [J]. Chinese J. Lasers, 2002, A29(8):755～758

[9] 季忠,吴诗惇. 板料激光弯曲成形数值模拟[J]. 中国激光, 2001, A28(10):953～956

    Ji Zhong, Wu Shichun. FEM simulation on laser bengding of sheet metal [J]. Chinese J. Lasers, 2001, A28(10):953～956

[10] 裴继斌,张立文,张全忠 等. 扫描次数对钢板激光弯曲成形影响的模拟[J]. 中国激光, 2007, 34(12):1721～1725

    Pei Jibin, Zhang Liwen, Zhang Quanzhong et al.. Simulation on influence of scanning passes during laser bending of steel plate [J]. Chinese J. Lasers, 2007, 34(12):1721～1725

[11] . J. Cheng, S. C. Lin. An analytical model to estimate angle formed by laser[J]. Journal of Materials Processing Technology, 2001, 108: 314-319.