[1] H. M. O’Bryan, J. Thomson, J. K. Plourde. A new BaO-TiO2 compound with temperature stable high permittivity and low microwave loss[J]. J. Am. Ceram. Soc., 1974, 57(10): 450-453

[2] Z. S. Macedo, A. C. Hernandes. A quantitative analysis of the laser sintering of bismuth titanate ceranmics[J]. Mater. Lett., 2005, 59(27): 3456-3461

[3] Z. S. Macedo, A. C. Hernandes. Laser sintering of Bi4Ti3O12 ferroelectric ceramics [J]. Mater. Lett., 2002, 55(44): 217-220

[4] Lingfei Ji, Yijian Jiang, Wei Wang et al.. Enhancement of the dielectric permittivity of Ta2O5 ceramics by CO2 laser irradiation [J]. Appl. Phys. Lett., 2004, 85(9): 1577-1579

[5] 洪永昌. 激光重熔镍基合金火焰喷焊层组织及性能[J]. 中国激光, 2008, 35(9): 1388-1394

    Hong Yongchang. Microstructure and performance of laser remelting Ni-based alloy sprayed-welding layers[J]. Chinese J. Lasers, 2008, 35(9): 1388-1394

[6] 高亚丽,王存山,刘红宾 等. 高功率激光熔凝AZ91HP镁合金组织和性能[J]. 中国激光, 2007, 34(7): 1019-1024

    Gao Yali, Wang Cunshan, Liu Hongbin et al.. Microstructure and properties of AZ91HP magnesium alloy treated by high power laser melting [J]. Chinese J. Lasers, 2007, 34(7): 1019-1024

[7] 郑启光. 激光加工先进技术[M]. 武汉: 华中科技大学出版社, 2002

    Zheng Qiguang. Laser Advanced Manufacture[M]. Wuhan: Huazhong University of Science and Technology Press, 2002

[8] 陆晓峰,王华明. 激光熔化沉积γ/NiMo近共晶合金的组织与耐磨性[J]. 中国激光, 2007, 34(4): 559-563

    Lu Xiaofeng, Wang Huaming. Microstructure and wear resistance of a laser melting-deposited γ/NiMo near-eutectic alloy [J]. Chinese J. Lasers, 2007, 34(4): 559-563

[9] 郭炜,李玲霞,吴霞宛 等. 掺杂稀土元素对细晶BaTiO3系统耐压及介电性能的影响[J]. 中国稀土学报, 2003, 21(2): 209-213

    Guo wei, Li Lingxia, Wu Xiawan et al.. Effect of doping rare earth on wear voltage and dielectric properties[J]. J. Rare Earth, 2003, 21(2): 209-213

[10] 郝素娥,韦永德,王进福 等. Nd2O3 添加量对BaTiO3陶瓷介电性能的影响[J]. 无机化学学报, 2002, 18(10): 1042-1043

    Hao Sue, Wei Yongde, Wang Jinfu et al.. Effect of Nd2O3 contents on dielectric properties of BaTiO3 ceramics[J]. Chinese J. Inorg. Chem., 2002, 18(10): 1042-1043