[1] 焦敬品, 李勇强, 杜礼, 等. 板结构裂纹兰姆波阵列复合成像方法研究[J]. 仪器仪表学报, 2016, 3703: 593-601.

    Jiao Jingpin, Li Yongqiang, Du Li, et al. Study on the compound imaging method for crack detection in plate structure using array of Lamb waves [J]. Chinese Journal of Scientific Instrument, 2016, 3703: 593-601. (in Chinese)

[2] 邓锐, 陈志远. 基于GTN模型对金属材料韧性断裂的模拟[J]. 国外电子测量技术, 2015, 34(2): 78-81．

    Deng Rui, Chen Zhiyuan. Numerical investigation for ductile fracture of metal based on GTN model [J]. Foreign Electronic Measurement Technology, 2015, 34(2): 78-81．(in Chinese)

[3] 冯辅周, 张超省, 闵庆旭, 等． 超声红外热像技术中金属平板裂纹的生热特性[J]．红外与激光工程, 2015, 44（5）: 1456-1461．

    Feng Fuzhou, Zhang Chaosheng, Min Qingxu, et al． Heating characteristics of metal plate crack in sonic IR imaging [J]．Infrared and Laser Engineering, 2015, 44(5): 1456-1461．(in Chinese)

[4] 秦雷, 刘俊岩, 龚金龙, 等． 超声红外锁相热像技术检测金属板材表面裂纹[J]．红外与激光工程, 2013, 42（5）: 1123-1130．

    Qin Lei, Liu Junyan, Gong Jinlong, et al. Testing surface crack defects of sheet metal with ultrasonic lock-in thermography [J]. Infrared and Laser Engineering, 2013, 42(5): 1123-1130． (in Chinese)

[5] 周德强, 王俊, 张秋菊, 等. 铁磁性构件缺陷的脉冲涡流检测传感机理研究[J]. 仪器仪表学报, 2015, 3605: 989-995.

    Zhou Deqiang, Wang Jun, Zhang Qiuju, et al. Research on sensing mechanism of ferromagnetic component flaw using pulsed eddy current testing [J]. Chinese Journal of Scientific Instrument, 2015, 3605: 989-995. (in Chinese)

[6] 付剑津,雷银照. 铁磁平板参数的正弦涡流检测方法研究[J]. 仪器仪表学报, 2016, 3703: 617-622.

    Fu Jianjin, Lei Yinzhao. Study on sinusoidal eddy current test method for ferromagnetic plate parameters [J]. Chinese Journal of Scientific Instrument, 2016, 3703: 617-622. (in Chinese)

[7] Wang Xun, Jin Wanping, Zhang Cunlin, et al. Actuality & evolvement of infrared thermal wave nondestructive imaging technology [J]. Nondestructive Testing, 2004, 26(10): 497-501.

[8] Zainal Abidin I, Tian G Y, Wilson J, et al. Quantitative evaluation of angular defects by pulsed eddy current thermography [J]. NDT and International, 2010, 43(7): 537-546.

[9] Zenzinger G, Bamberg J, Satzger W, et al. Thermographic crack detection by eddy current excitation [J]. Nondestructive Testing and Evaluation, 2007, 22(2-3): 101-111.

[10] Liu F, Yang S, Leng C, et al. Simulation on quantitative analysis of crack inspection by using eddy current stimulated thermography [J]. New Technology & Application, Far East Forum on Nondestructive Evaluation/testing, 2013: 59-64.

[11] 常东, 左宪章, 田贵云,等. 裂纹方向对脉冲涡流激励热成像的影响[J]. 上海交通大学学报, 2013, 47(5): 779-785.

    Chang Dong, Zuo Xianzhang, Tian Guiyun, et al. Analysis of the crack orientation effect on pulsed eddy current stimulated thermography [J]. Journal of Shagnhai Jiao Tong University, 2013, 47(5): 779-785. (in Chinese)

[12] 孙晓莹, 侯德鑫, 叶树亮. 平行激励下脉冲涡流热成像响应规律的研究[J]. 激光与红外, 2015, 45(4): 393-399

    Sun Xiaoying, Hou Dexin, Ye Shuliang. Research on response of pulse eddy current thermography under parallel excitation [J]. Laser & Infrared, 2015, 45(4): 393-399. (in Chinese)

[13] Parker W J, Jenkins R J, Butler C P, et al. Flash method of determining thermal diffusivity, heat capacity, and thermal conductivity [J]. Journal of Applied Physics, 1961, 32(9): 1639-1684.

[14] Carlaw H S, Jaeger J C. Conduction of Heat in Solids [M]. New York: Osford University Press, 1959.