[1] SEBASTIEN L, STEVEN V P, ELLEN D S, et al.. The future of organic photovoltaic solar cells as a direct power source for consumer electronics ［J］. Solar Energy Mater. Solar Cells, 2012, 103(1):1-10.

[2] WANG Y M, WEI W, LIU X, et al.. Research progress on polymer heterojunction solar cells ［J］. Solar Energy Mater. Solar Cells, 2012, 98(1):129-145.

[3] LIANG Y Y, XU Z, XIA J B, et al.. For the bright future-bulk heterojunction polymer solar cells with power conversion efficiency of 7.4% ［J］. Adv. Energy Mater., 2010, 22(20):E135-E138.

[4] MARTIN A G, KEITH E, YONSHIHIRO H, et al.. Solar cell efficiency tables \[J\]. Prog. Photovolt. Res. Appl., 2012, 20(1):12-20.

[5] 王丽娟, 张伟, 秦海涛, 等. 溶液加工条件对聚合物体相异质结太阳能电池性能的影响 ［J］. 液晶与显示, 2013, 28(4):521-526.

    WANG L J, ZHANG W, QIN H T, et al.. Influence of solution-processed conditions on polymer bulk heterojunction solar cell performance ［J］. Chin. J. Liq. Cryst. Disp., 2013, 28(4):521-526. (in Chinese)

[6] 李卫民, 郭金川, 周彬. 溶剂挥发时间对体异质结有机太阳能电池复合特性的影响 ［J］. 发光学报, 2015, 36(4):437-442.

    LI W M, GUO J C, ZHOU B. Solvent evaporation time dependent recombination properties in bulk heterojunction organic solar cells ［J］. Chin. J. Lumin., 2015, 36(4):437-442. (in Chinese)

[7] HUANG P H, WANG Y H, KE J C, et al.. Investigation of various active layers for their performance on organic solar cells ［J］. Materials, 2016, 9(8):667.

[8] 尹丽琴， 彭俊彪. 聚合物P3HT在不同退火温度下的空穴传输特性 ［J］. 物理学报, 2009, 58(5):3456-3460.

    YIN L Q, PENG J B. Hole transport in polymer P3HT with different annealing temperatures ［J］. Acta Phys. Sinica, 2009, 58(5):3456-3460. (in Chinese)

[9] HU Z Y, ZHANG J J, ZHU Y J. High-performance and air-processed polymer solar cells by room-temperature dryinof the active layer ［J］. Appl. Phys. Lett., 2013, 102(4):043307.

[10] ZHENG Y F, GUAN Z Q, YU J S, et al.. Effect of in situ annealing on the performance of spray coated polymer solar cells ［J］. Solar Energy Mater. Solar Cells, 2013, 111:200-205.

[11] 刘冠辰, 谢小银. 氯苯和邻二氯苯及其混合物作为溶剂对P3HT/PCBM异质结活性层光电转换效率的影响 ［J］. 科学技术与工程, 2016, 16(1):13-16.

    LIU G C, XIE X Y. Solvent effects of chlorobenzene, ortho-dichlorobenzene and their mixture to performance of P3HT/PCBM-based bulk-heterojunction solar cells ［J］. Sci. Technol. Eng., 2016, 16(1):13-16. (in Chinese)

[12] SHAHEEN S E, GINLEY D S, JABBOUR G E. Organic-based photovoltaics: toward low-cost power generation ［J］. MRS Bulletin, 2005, 30(1):10-15.

[13] PEUMANS P, YAKIMOV A, FORREST S R. Small molecular weight organic thin-film photodetectors and solar cells ［J］. J. Appl. Phys., 2003, 93(7):3693-3723.

[14] BRABEC C J, CRAVINO A, MEISSNER D, et al.. Origin of the open circuit voltage of plastic solar cells ［J］. Adv. Funct. Mater., 2001, 11:34.

[15] BRABEC C J, CRAVINO A, MEISSNER D, et al.. The influence of materials work function on the open circuit voltage of plastic solar cells ［J］. Thin Solid Films, 2002, 403(2):368-372.

[16] SCHARBER M, MHLBACHER D, KOPPE M, et al.. Design rules for donors in bulk-heterojunction solar cells—towards 10% energy-conversion efficiency ［J］. Adv. Mater., 2006, 18(3):579-583.

[17] CHEN B, QIAO X, LIU C M, et al.. Effects of bulk and interfacial charge accumulation on fill factor in organic solar cells ［J］. Appl. Phys. Lett., 2013, 102(19):193302.

[18] ZHAO C, QIAO X, CHEN B, et al.. Thermal annealing effect on internal electrical polarization in organic solar cells ［J］. Org. Electron., 2013, 14(9):2192-2197.

[19] PICKETT A, MOHAPATRA A, LAUDARI A, et al.. Hybrid ZnO-organic semiconductor interfaces in photodetectors: a comparison of two near-infrared donor-acceptor copolymers ［J］. Org. Electron., 2017, 45:115-123.