切削用量对铝靶表面质量的影响
谢军, 黄燕华, 杜凯, 袁光辉, 郑凤成, 黄丽珍, 朱磊. 切削用量对铝靶表面质量的影响[J]. 强激光与粒子束, 2005, 17(11): 1693.
XIE Jun, HUANG Yan-hua, DU Kai, YUAN Guang-hui, ZHENG Feng-cheng, HUANG Li-zhen, ZHU Lei. Effect of cutting conditions on surface roughness of aluminum target[J]. High Power Laser and Particle Beams, 2005, 17(11): 1693.
[1] Fu S Z, Gu Y, Wu J, et al. Laser-driven shock stability in Al and shock compressibilities of Fe up to 0.8 TPa and SiO2 up to 0.4 TPa[J]. Phys Plasmas,1995, 2(9): 3461-3465.
[2] 傅思祖, 黄秀光, 吴江, 等. 利用"神光-Ⅱ"激光装置多路光束叠加直接驱动下的冲击波平面性及稳定性[J]. 强激光与粒子束, 2003, 15(6):572-572.
Fu S Z, Huang X G, Wu J, et al. Planarity and stability of shock driven directly by multi-beam laser from "Shengguang-Ⅱ" laser facility. High Power Laser and Particle Beams, 2003, 15(6): 572-572
[3] 顾援, 倪元龙, 王刚勇, 等.激光驱动高压冲击波的实验观察[J]. 物理学报, 1988, 37(10):1690-1693.
Gu Y, Ni Y L, Wang G Y, et al. Experimental observation of laser driven high pressure shock waves. Acta Physica Sinica, 1988, 37(10): 1690-1693
[4] Gu Y, Fu S Z, Wu J, et al. Equations of state studies at SILP by laser-driven shock waves[J]. Laser and Particle Beams,1996, 14(2): 157-169.
[5] Cauble R, Phillion D W, Hoover T J, et al. Demonstration of 0.75 Gbar planar shocks in X-ray driven colliding foils[J]. Physical Review Letters,1993, 70(14): 2102-2105.
[6] Evans A M, Freeman N J, Graham P, et al. Hugoniot EOS measurements at Mbar pressures[J]. Laser and Particle Beams,1996, 14(2): 113-123.
[7] Rothman S D, Evans A M, Eagleton R T, et al. Material properties experiments using the AWE high power laser,HELEN[J]. Impact Engineering, 1999, 23: 803-810.
[8] Rothman S D, Evans A M, Graham P, et al. Measurement of the lead principal Hugoniot at ~800 kbar by indirect laser drive[J]. Physics D: Applied Physics, 2002, 35: 3021-3026.
[9] 王先逵. 精密加工技术实用手册(M). 北京: 机械工业出版社, 2001.
Wang X K. Practical handbook of precision machining technology, Beijing: China Machine Press, 2001
[10] Ikawa N, Donaldson R R, Komanduri R, et al. Ultra-precision metal cutting-the past,the present and the future[J]. Annals of the CIRP,1991, 40(2):587-594.
[11] Ikawa N, Shimada S, Tanaka H. Minimum thickness of cut in micromachining [J]. Nanotechnology, 1992, 3(1): 6-9.
[12] 周泽华.金属切削原理(M). 上海:上海科学技术出版社,1993. 45-184.
Zhou Z H. Principles of metal cutting. Shanghai: Shanghai Scentific and Technical Publishers,1993. 45-184
谢军, 黄燕华, 杜凯, 袁光辉, 郑凤成, 黄丽珍, 朱磊. 切削用量对铝靶表面质量的影响[J]. 强激光与粒子束, 2005, 17(11): 1693. XIE Jun, HUANG Yan-hua, DU Kai, YUAN Guang-hui, ZHENG Feng-cheng, HUANG Li-zhen, ZHU Lei. Effect of cutting conditions on surface roughness of aluminum target[J]. High Power Laser and Particle Beams, 2005, 17(11): 1693.