[1] Pfalzner S. 惯性约束聚变导论［M］.北京: 原子能出版社,2011: 1-5.(Pfalzner S. An introduction to inertial confinement fusion. Beijing: Atomic Energy Press, 2011: 1-5)

[2] Wilson D C, Bradley P A, Hoffman N M, et al. The development and advantages of beryllium capsules for the National Ignition Facility［J］. Physics of Plasmas, 1998, 5(5): 1953-1959.

[3] 张占文.惯性约束聚变中的双壳层靶制备技术基础研究［D］.绵阳: 中国工程物理研究院, 2007: 1-20.(Zhang Zhanwen. Fabrication technology of double shell targets for inertial confinement fusion. Mianyang: China Academy of Engineering Physics, 2007: 1-20)

[4] 张占文,漆小波,李波.惯性约束聚变点火靶候选靶丸特点及制备研究进展［J］.物理学报, 2012, 61: 145204.(Zhang Zhanwen, Qi Xiaobo ,Li Bo.Properties and fabrication status of capsules for ignition targets in inertial confinement fusion experiments. Acta Physica Sinica, 2012, 61: 145204)

[5] Lindl J D, Amendt P, Berger R L, et al. The physics basis for ignition using indirect-drive targets on the National Ignition Facility［J］. Physics of Plasmas, 2004, 11(2): 339-491.

[6] Haan S W, Herrmann M C, Amendt P A. Update on specifications for NIF ignition targets, and their rollup into an error budget［J］. Fusion Science and Technology, 2006, 49(4): 553-557.

[7] Hardy H L. Beryllium disease: A clinical perspective［J］. Environmental Research, 1980, 21(1): 1-9.

[8] 谭佳梅,张鹏程,周上祺. 铍与铜合金热等静压扩散连接研究进展［J］.材料导报, 2007, 21(5): 213-216.(Tan Jiamei, Zhang Pengcheng, Zhou Shangqi. Progress in research on HIP diffusion bonding of Be/Cu-alloy. Materials Review, 2007, 21(5): 213-216)

[9] 许德美,秦高梧,李峰,等.BeO杂质形态与分布对金属铍力学性能的影响［J］.中国有色金属学报, 2011, 21(4): 769-776.(Xu Demei, Qin Gaowu, Li Feng, et al. Effects of morphology and distribution of BeO impurity on mechanical properties of metal beryllium. The Chinese Journal of Nonferrous Metals, 2011, 21(4): 769-776)

[10] 罗炳池,罗江山,李恺,等. Be薄膜制备及其生长动力学性质研究［J］.稀有金属材料与工程, 2012, 41(9): 1684-1688.(Luo Bingchi, Luo Jiangshan, Li Kai, et al.Preparation of Be thin films and the growth dynamic characteristics. Rare Metal Materials and Engineering, 2012, 41(9): 1684-1688)

[11] 罗炳池,李恺,张吉强,等.纳米晶Be薄膜制备及晶粒细化研究［R］//惯性约束聚变科技年报: 下册. 2012: 68-71.(Luo Bingchi, Li Kai, Zhang Jiqiang, et al. Investigation on grain refinement and fabrication of nanocrystalline Be films//Annals of Inertial Confinement Fusion: Part Ⅱ, 2012: 68-71)

[12] Strobel G L, Haan S W, Munro D H, et al. Yield and hydrodynamic instability versus absorbed energy for a uniformly doped beryllium 250eV ignition capsule［J］. Physics of Plasmas, 2004, 11(10): 4695-4700.

[13] Lundgren E H. Fabrication of pressurized 2mm beryllium targets for ICF experiment［J］. Fusion Science and Technology, 2007, 51(4): 576-580.

[14] Haan S W, Amendt P A, Callahan D A. Update on specifications for NIF ignition targets［J］. Fusion Science and Technology, 2007, 51(4): 509-513.

[15] Haan S W, Salmonson J D, Clark D S, et al. NIF ignition target requirements, margins, and uncertainties: status february 2010［J］. Fusion Science and Technology, 2011, 59(1): 1-7.

[16] Xu H, Alford C S, Cooley J C, et al. Beryllium capsule coating development for NIF targets［R］. GA-A25674 2007.

[17] Moreno K A, Eddinger S, Fong J. Overview of National Ignition Facility capsule metrology［J］. Fusion Science and Technology, 2009, 55(4): 349-355.

[18] Xu H, Alford C, Chason E, et al. Thick beryllium coatings by ion assisted magnetron sputtering［J］. Journal of Materials Research, 2012, 27(5): 822-828.

[19] Kdas K, Vitos L, Johansson B, et al. Structural stability of β-beryllium［J］. Physical Review B, 2007, 75: 035132.

[20] Young B K, Huang H, Wu H W, et al. Thin oxides as a Cu diffusion barrier for NIF Be ablator capsules［R］. De-AC52-06NA 27279, 2012.

[21] McEachern R. Tailoring material properties of sputtered beryllium［R］. LDRD Final Report: 97-ERD-129, 1999.

[22] Jankowski A F, Wall M A, Van Buuren A W, et al. From nanocrystalline to amorphous structure in beryllium based coatings［J］. Acta Materialia, 2002, 50(19): 4791-4800.

[23] McElfresh M, Gunther J, Alford C, et al. Fabrication of beryllium capsules with copper-doped layers for NIF targets: a progress report［J］. Fusion Science and Technology, 2006, 49(4): 786-795.

[24] Hoope M L, Castillo E. Polishing of beryllium capsules to meet NIF specifications［J］. Journal de Physique, 2006, 4(133): 895-898.

[25] Czechowicz D G, Chen C J, Dorman J A, et al. Investigation to remove domes from plastic shells by polishing［J］. Fusion Science and Technology, 2007, 51(4): 600-605.