[1] 彭毅雯,徐伟, 罗毅, 等．TFT-LCD面影像残留改善研究［J］．液晶与显示, 2012, 27(1): 66-69.

    Peng Y W, Xue W, Luo Y, et al.Improvement of TFT-LCD area image sticking ［J］.Chinese Journal of Liquid Crystals and Displays, 2012, 27(1): 66-69.(in Chinese)

[2] 万建武.表面张力作用下的平行平板下填充流动模型研究［J］, 广州大学学报: 自然科学版, 2010, 9(5): 11-15.

    Wang J W.Study of underfill flow model between two parallel plates driven by capillary forces ［J］.Journal of Guangzhou University: Natural Science Edition,2010, 9(5): 11-15. (in Chinese)

[3] Wang J. Underfill of flip-chip on organic substrate: viscosity, surface tension and contact angle ［J］.Microelectronics Reliability,2002, 42: 293-299.

[4] Washburn E W. The dynamics of capillary flow ［J］.Physical Review,1921, 17(3): 273-283.

[5] Gamota D R,Melton C M.Advanced encapsulant materials systems for flip-chip-on-board assemblies. I. Encapsulant materials with improved manufacturing properties. II. Materials to integrate the reflow and underfilling processes ［C］.Electronics Manufacturing Technology Symposium, Austin,1996: 1-9.

[6] Pascarella N W,Baldin D F.Compression flow modeling of underfill encapsulation for low cost flip-chip assembly ［J］.IEEE Transactions on Components, Packaging, and Manufacturing Technology, Part C,1998, 21(4): 325-335.

[7] Han S,Wang K K.Analysis of the flow of encapsulant during underfill encapsulation of flip-chips ［J］.IEEE Transactions on Components, Packaging, and Manufacturing Technology, Part B,1997, 20 (4): 424-433.

[8] Schwiebert M K,Leong W H.Underfill flow as viscous flow between parallel plates driven by capillary action ［J］.IEEE Transactions on Components, Packaging, and Manufacturing Technology, Part C,1996, 19(2): 133-137.

[9] 丁祖荣.流体力学［M］.北京: 高等教育出版社, 2004: 16-22.

    Ding Z R. Hydromechanics ［M］.Beijing: Higher Education Press, 2004: 16-22.(in Chinese)

[10] 吴望一.流体力学［M］.北京: 北京大学出版社, 1982: 161-170.

    Wu W Y.Hydromechanics ［M］.Beijing: Peking University Press, 1982: 161-170. (in Chinese)