[1] 刘勇, 田保红, 刘素芹. 先进材料表面处理和测试技术［M］. 北京: 科学出版社, 2008. 107～109

    Liu Yong, Tian Baohong, Liu Suqin. Advanced Technologies of Materials Surface Processing and Testing［M］. Beijing: Science Press, 2008. 107～109

[2] 钟敏霖, 刘文今. 国际激光材料加工研究的主导领域与热点［J］. 中国激光, 2008, 35(11): 1653～1659

    Zhong Minlin, Liu Wenjin. Leading areas and hot topics on global laser materials processing research［J］. Chinese J. Lasers, 2008, 35(11): 1653～1659

[3] 敬晓定, 晁明举, 孙海勤 等. 原位生长Cr3C2-CrB复合增强镍基激光熔覆层研究［J］. 中国激光, 2009, 36(1): 231～237

    Jing Xiaoding, Chao Mingju, Sun Haiqin et al.. Investigation on in-situ synthesis of Cr3C2-CrB reinforced Ni-based composite coatings by laser cladding［J］. Chinese J. Lasers, 2009, 36(1): 231～237

[4] 张现虎, 晁明举, 梁二军 等. 激光熔覆原位生成TiC-ZrC颗粒增强镍基复合涂层［J］. 中国激光, 2009, 36(4): 998～1004

    Zhang Xianhu, Chao Mingju, Liang Erjun et al..In-situ synthesis of TiC-ZrC particulate reinforced Ni-based composite coatings by laser cladding［J］. Chinese J. Lasers, 2009, 36(4): 998～1004

[5] 孙荣禄, 杨贤金. 45钢表面激光熔覆NiCrBSi涂层的组织和摩擦磨损性能［J］. 材料工程, 2005, (8): 20～24

    Sun Ronglu, Yang Xianjin. Microstructure and tribological properties of NiCrBSi laser cladding on 45 steel substrate［J］. Material Engineering, 2005, (8): 20～24

[6] 吴萍, 姜恩永, 赵慈 等. 激光参数对Ni基熔覆层结构及耐磨性的影响［J］. 焊接学报, 2003, 24(2): 44～48

    Wu Ping, Jiang Enyong, Zhao Ci et al.. Influence of laser parameters on microstructure and tribological properties of Ni-based cladding layers［J］. Transactions of the China Welding Institution, 2003, 24(2): 44～48

[7] K. Van Acker, D. Vanhoyweghen, R. Persoons et al.. Influence of tungsten carbide particle size and distribution on the wear resistance of laser clad WC/Ni coatings［J］. Wear, 2005, 258(1-4): 194～202

[8] 吴新伟, 曾晓雁, 朱蓓蒂 等. 镍基碳化钨金属陶瓷激光熔覆层开裂性的研究［J］. 中国激光, 1997, 24(6): 570～576

    Wu Xinwei, Zeng Xiaoyan, Zhu Beidi et al.. Research on crack resistance of Ni based WC cremet laser cladding layer［J］. Chinese J. Lasers, 1997, 24(6): 570～576

[9] 李慕勤, 马臣, 尹柯 等. Ni-WC-Re组合粉喷焊层的磨损和腐蚀行为［J］. 焊接学报, 1996, 17(1): 7～12

    Li Muqin, Ma Chen, Yin Ke et al.. Abradability and corrosion resistance of spray-welding layers of Ni-WC-Re combination powder［J］. Transactions of the China Welding Institution, 1996, 17(1): 7～12

[10] 李晶, 钟敏霖, 刘文今 等. 55Mn钢表面激光熔覆原位析出颗粒增强Ni基复合涂层的组织与性能［J］. 金属热处理, 2006, 31(11): 8～12

    Li Jing, Zhong Minlin, Liu Wenjin et al.. Microstructures and properties of laser-cladding in-situ particle reinforced Ni-base composite coating on 55Mn steel［J］. Heat Treatment of Metals, 2006, 31(11): 8～12

[11] 斯松华, 徐锟, 袁晓敏 等. 激光熔覆Cr3C2/Co基合金复合涂层组织与摩擦磨损性能研究［J］. 摩擦学学报, 2006, 26(2): 125～129

    Si Songhua, Xu Kun, Yuan Xiaomin et al.. Investigation on the microstructure and tribological performance of laser cladding Cr3C2/Co based compound coating［J］. Tribology, 2006, 26(2): 125～129

[12] Huang Zhenyi, Hou Qingyu, Wang Ping. Microstructure and properties of Cr3C2-modified nickel-based alloy coating deposited by plasma transferred arc process［J］. Surface & Coatings Technology, 2008, 202(13): 2993～2999

[13] Guo Chun, Zhou Jiansong, Chen Jianmin et al.. Improvement of the oxidation and wear resistance of pure Ti by laser cladding at elevated temperature［J］. Surface & Coatings Technology, 2010, 205(7): 2142～2151