[1] M. Chao, W. Wang, E. Liang et al.. Microstructure and wear resistance of TaC reinforced Ni-based coating by laser cladding［J］. Surface & Coatings Technology, 2008, 202(10): 1918～1922

[2] G. Bi, B. Schürmann, A. Gasser et al.. Development and qualification of a novel laser-cladding head with integrated sensors［J］. International Journal of Machine Tools & Manufacture, 2007, 47(3-4): 555～561

[3] 张晓伟, 刘洪喜, 蒋业华 等. Ti6Al4V合金表面激光熔覆功能复合涂层研究进展［J］. 稀有金属材料与工程, 2012, 41(1): 178～183

    Zhang Xiaowei, Liu Hongxi, Jiang Yehua et al.. Research progress of functional composite coatings on Ti6Al4V alloy surface prepared by laser cladding technique［J］. Rare Metal Materails and Engineering, 2012, 41(1): 178～183

[4] C. Navas, R. Colao, J. de Damborenea et al.. Abrasive wear behaviour of laser clad and flame sprayed-melted NiCrBSi coatings［J］. Surface & Coatings Technology, 2006, 200(24): 6854～6862

[5] R. González, M. A. García, I. Peuelas et al.. Microstructural study of NiCrBSi coatings obtained by different processes［J］. Wear, 2007, 263(1-6): 619～624

[6] S. W. Huang, M. Samandia, M. Brandt. Abrasive wear performance and microstructure of laser clad WC/Ni layers［J］. Wear, 2004, 256(11-12): 1095～1105

[7] E. Fernández, M. Cadenas, R. González et al.. Wear behaviour of laser clad NiCrBSi coating［J］. Wear, 2005, 259(7-12): 870～875

[8] H. Kashani, A. Amadeh, H. M. Ghasemi. Room and high temperature wear behaviors of nickel and cobalt base weld overlay coatings on hot forging dies［J］. Wear, 2007, 262(7-8): 800～806

[9] N. Serres, F. Hlawka, S. Costil et al.. Microstructures and mechanical properties of metallic NiCrBSi and composite NiCrBSi-WC layers manufactured via hybrid plasma/laser process［J］. Applied Surface Science, 2011, 257(12): 5132～5137

[10] 袁庆龙, 冯旭东, 曹晶晶 等. 激光熔覆镍基合金涂层微观组织研究［J］. 中国激光, 2010, 37(8): 2116～2120

    Yuan Qinglong, Feng Xudong, Cao Jingjing et al.. Research on microstructure of Ni-based alloy coating by laser cladding［J］. Chinese J. Lasers, 2010, 37(8): 2116～2120

[11] 何祥明, 刘秀波, 杨茂盛 等. 奥氏体不锈钢激光熔覆镍基复合涂层高温磨损行为［J］. 中国激光, 2011, 38(9): 0903007

    He Xiangming, Liu Xiubo, Yang Maosheng et al.. Elevated temperature tribological behaviors of laser cladding nickel-based composite coating on austenitic stainless steel［J］. Chinese J. Lasers, 2011, 38(9): 0903007

[12] C. Guo, J. Zhou, J. Chen et al.. High temperature wear resistance of laser cladding NiCrBSi and NiCrBSi/WC-Ni composite coatings［J］. Wear, 2011, 270(7-8): 492～498

[13] G. Sun, R. Zhou, P. Li et al.. Laser surface alloying of C-B-W-Cr powders on nodular cast iron rolls［J］. Surface & Coatings Technology, 2011, 205(8-9): 2747～2754

[14] 徐松华, 肖阳, 李健. 直升机发动机涡轮导向器激光修复组织性能研究［J］. 光学学报, 2010, 30(8): 2311～2316

    Xu Songhua, Xiao Yang, Li Jian. Organization property researches of the laser repair technology in the helicopter engine turbine oriented implement［J］. Acta Optica Sinica, 2010, 30(8): 2311～2316

[15] 吴朝锋, 马明星, 刘文今 等. 激光原位制备复合碳化物颗粒增强铁基复合涂层及其耐磨性的研究［J］. 金属学报, 2009, 45(8): 1013～1018

    Wu Chaofeng, Ma Mingxing, Liu Wenjin et al.. Study on wear resistance of laser cladding Fe-based composite coatings reinforced by in-situ multiple carbide particles［J］. Acta Metallurgica Sinica, 2009, 45(8): 1013～1018

[16] 吴朝锋, 马明星, 吴爱平 等. 激光原位制备颗粒增强铁基复合涂层中碳化物相的形貌分析［J］. 金属学报, 2009, 45(9): 1091～1098

    Wu Chaofeng, Ma Mingxing, Wu Aiping et al.. Morphologic characteristics of in-situ synthesized carbide particles in laser cladded Fe-based composite coatings［J］. Acta Metallurgica Sinica, 2009, 45(9): 1091～1098

[17] 牛薪, 晁明举, 王文丽 等. 原位生成NbC颗粒增强镍基激光熔覆层［J］. 中国激光, 2006, 33(7): 987～992

    Niu Xin, Chao Mingju, Wang Wenli et al.. In situ synthesized NbC particulate reinforced Ni-based composite coatings by laser cladding［J］. Chinese J. Lasers, 2006, 33(7): 987～992

[18] 王文丽, 晁明举, 王东升 等. 原位生成TaC颗粒增强镍基激光熔覆层［J］. 中国激光, 2007, 34(2): 277～282

    Wang Wenli, Chao Mingju, Wang Dongsheng et al.. Investigation on in-situ synthesis of TaC particulate reinforced Ni-based composite coatings by laser cladding［J］. Chinese J. Lasers, 2007, 34(2): 277～282

[19] 敬晓定, 晁明举, 孙海勤 等. 原位生长Cr3C2-CrB复合增强镍基激光熔覆层研究［J］. 中国激光, 2009, 36(1): 231～237

    Jing Xiaoding, Chao Mingju, Sun Haiqin et al.. Investigation on in-situ synthesis of Cr3C2-CrB reinforced Ni-based composite coatings by laser cladding［J］. Chinese J. Lasers, 2009, 36(1): 231～237

[20] C. Wang, H. Liu, X. Zhang et al.. Effect of laser power and heat treatment process on microstructure and property of multi-pass Ni based alloy laser cladding coating［C］. SPIE, 2010, 7843: 78430Y

[21] 王传琦, 刘洪喜, 周荣 等. 回火处理对多道Ni基熔覆涂层组织和耐蚀性能的影响［J］. 材料热处理学报, 2011, 32(7): 145～150

    Wang Chuanqi, Liu Hongxi, Zhou Rong et al.. Influence of tempering on microstructure and corrosion resistance of multi-pass Ni-based coatings on 45 steel prepared by laser cladding［J］. Transactions of Materials and Heat Treatment, 2011, 32(7): 145～150

[22] A. Hidouci, J. M. Pelletier, F. Ducoin et al.. Microstructural and mechanical characteristics of laser coatings［J］. Surface and Coatings Technology, 2000, 123(1): 17～23

[23] S. Anthonysamy, K. Ananthasiran, I. Kaliappan et al.. Gibbs energies of formation of chromium carbides［J］. Metallurgical and Materials Transaction A, 1996, 27(7): 1717～1724

[24] 李强, 雷廷权, 孟庆昌 等. 激光熔覆Ni-Cr-B-Si-C合金涂层显微组织的透射电镜研究［J］. 中国激光, 1999, 26(4): 372～378

    Li Qiang, Lei Tingquan, Meng Qingchang et al.. Transmission electron microscopy for microstructural characterization of the laser clad Ni-Cr-B-Si-C alloy［J］. Chinese J. Lasers, 1999, 26(4): 372～378

[25] 斯松华, 徐锟, 袁晓敏 等. 激光熔覆Cr3C2/Co基合金复合涂层组织与摩擦磨损性能研究［J］. 摩擦学学报, 2006, 26(2): 125～129

    Si Songhua, Xu Kun, Yuan Xiaomin et al.. Microstructure and wear performance of laser cladding Cr3C2/Co alloy composite coating［J］. Tribology, 2006, 26(2): 125～129

[26] C. H. Lee, K. O. Min. Effects of heat treatment on the microstructure and properties of HVOF-sprayed Ni-Cr-W-Mo-B alloy coatings［J］. Surface and Coatings Technology, 2000, 132(1): 49～57

[27] 王存山, 夏元良, 李刚 等. 宽带激光熔覆Ni60B+WC复合涂层的组织及性能［J］. 材料热处理学报, 2001, 22(2): 32～36

    Wang Cunshan, Xia Yuanliang, Li Gang et al.. Microstructure and properties of broad-beam laser clad Ni60B+30%WC composite coatings［J］. Transactions of Materials and Heat Treatment, 2001, 22(2): 32～36

[28] Q. Y. Hou, Z. Y. Huang, N. Shi et al.. Effects of molybdenum on the microstructure and wear resistance of nickel-based hardfacing alloys investigated using Rietveld method［J］. Journal of Materials Processing Technology, 2009, 209(6): 2767～2772

[29] 李志, 曲敬信, 吴仲行 等. 真空熔结镍基合金涂层的组织结构及其高温磨损特性［J］. 材料工程, 2000, (1): 7～12

    Li Zhi, Qu Jingxin, Wu Zhongxing et al.. Study on microstructure and high temperature wear characteristics of a vacuum melting Ni-base alloy coating［J］. Journal of Materials Engineering, 2000, (1): 7～12

[30] J. H. Chang, S. K. Tzenga, J. M. Chou et al.. Effect of dry sliding wear conditions on a vacuum induction melted Ni alloy［J］. Wear, 2011, 270(3-4): 294～301