[1] 黄文美, 薛胤龙, 王莉, 等. 考虑动态损耗的超磁致伸缩换能器的多场耦合模型［J］. 电工技术学报, 2016, 31(7): 173-178.

    HUANG W M, XUE Y L, WANG L, et al.. Multi-field coupling model considering dynamic losses for giant magnetostrictive transducers［J］. Transactions of China Electrotechnical Society. 2016, 31(7): 173-178.(in Chinese)

[2] 贺学锋, 杜志刚, 赵兴强, 等. 悬臂梁式压电振动能采集器的建模及实验验证［J］. 光学 精密工程, 2011,19(8): 1771-1778.

    HE X F, DU Z G, ZHAO X Q, et al.. Modeling and experimental verification for cantilevered piezoelectric vibration energy harvester［J］. Opt. Precision Eng., 2011,19(8): 1771-1778.(in Chinese)

[3] ZHANG J H, MA S L, QIN L F. Analysis of frequency characteristics of MEMS piezoelectric cantilever beam based energy harvester［C］. Proceedings of 2015 Symposium on Piezoelectricity, Acoustic Waves, and Device Applications (SPAWDA), IEEE, 2015: 193-197.

[4] RAMEZANPOUR R, NAHVI H, ZIAEI-RAD S. Electromechanical behavior of a pendulum-based piezoelectric frequency up-converting energy harvester［J］. Journal of Sound and Vibration, 2016, 370: 280-305.

[5] 王博文, 张露予, 王鹏,等. 磁致伸缩位移传感器检测信号分析［J］. 光学 精密工程, 2016, 24(2): 358-364.

    WANG B W, ZHANG L Y, WANG P, et al.. Analysis of detection signal for magnetostrictive displacement sensor.［J］.Opt. Precision Eng., 2016, 24(2): 358-364.(in Chinese)

[6] 曹淑瑛, 桑杰, 郑加驹, 等. Galfenol悬臂梁能量采集器的机电耦合动态模型［J］. 中国电机工程学报,2015,35(21): 5623-5631.

    CAO S Y, SANG J, ZHENG J J, et al.. Mechanical-electro coupled dynamic model of Galfenol cantilever energy harvester［J］. Proceedings of the CSEE,2015,35(21): 5623-5631.(in Chinese)

[7] 王福吉, 贾振元, 刘巍, 等. 复合薄膜磁致伸缩系数求解及悬臂梁结构优化［J］. 光学 精密工程,2011,19(8): 1832-1837.

    WANG F J, JIA Z Y, LIU W, et al.. Calculation of magnetostrictive coefficient of composite thin film and structure optimization of cantilever［J］. Opt. Precision Eng., 2011,19(8): 1832-1837.(in Chinese)

[8] BOTTERON C, BRIAN D, MISHRA B, et al.. A low-cost UWB sensor node powered by a piezoelectric harvester or solar cells［J］. Sensors and Actuators A: Physical,2016(239): 127-136.

[9] KOYAMA K, SUZUKI Y, MING A, et al.. Grasping control based on time-to-contact method for a robot hand equipped with proximity sensors on fingertips［C］. Proceedings of 2015 IEEE- International Conference on Intelligent Robots and Systems. IEEE, 2015: 504-510.

[10] GUNJI D, MIZOGUCHI Y, TESHIGAWARA S, et al.. Grasping force control of multi-fingered robot hand based on slip detection using tactile sensor［C］. Proceedings of IEEE-International Conference on Robotics and Automation, IEEE, 2008: 2605-2610.

[11] KAPPASSOV Z, CORRALES J A, PERDEREAU V, et al.. Tactile sensing in dexterous robot hands — Review［J］. Robotics and Autonomous Systems, 2015,74: 195-220.

[12] LI S Q, FU L L, BARBAREE J M, et al.. Resonance behavior of magnetostrictive micro/milli-cantilever and its application as a biosensor［J］. Sensors & Actuators B: Chemical, 2009, 137(2): 692-699.

[13] 翁玲, 王博文, 孙英, 等. 磁场和应力作用下的超磁致伸缩换能器的动态模型［J］. 电工技术学报,2008,23(12): 17-22.

    WENG L, WANG B W, SUN Y, et al.. Dynamic model of giant magnetostrictive transducer under magnetic field and stress［J］. Transactions of China Electrotechnical Society. 2008,23(12): 17-22.(in Chinese)

[14] SHU L, WU G C, CHEN D F, et al.. Modeling of galfenol bending actuator considering nonlinear hysteresis and dynamic real-time control strategy［J］. Smart Materials & Structures, 2016, 25(3): 035046.

[15] CHO C, KYUH Y. Fabrication of flexible tactile force sensor using conductive ink and silicon elastomer［J］. Sensors and Actuators,A: Physical, 2016(237): 73-80.

[16] XU T Z, ZHAO L B, JIANG Z D, et al.. A high sensitive pressure sensor with the novel bossed diaphragm combined with peninsula-island structure［J］. Sensors and Actuators A: Physical, 2016(237): 66-76.

[17] 郭鑫, 热合曼·艾比布力, 王鸿雁, 等. 自增强承压圆筒结构的超高压力传感器［J］. 光学 精密工程,2013,21(12): 3152-3159.

    GUO X, RAHMAN·H, WANG H Y, et al.. Ultra-high pressure sensor with autofrettaged cylinder structure［J］. Opt. Precusion Eng., 2013,21(12): 3152-3156.(in Chinese)