[1] 胡凤兰. 互换性与技术测量基础[M]. 北京: 高等教育出版社, 2005. 5.

    Hu Fenglan. Interchangeability and Technology Measurement Fundamental[M]. Beijing: Higher Education Press, 2005. 5.

[2] 杨永强, 卢建斌, 王迪, 等. 316L不锈钢选区激光熔化快速成型非水平悬垂面研究[J]. 材料科学与工艺, 2011, 19(6): 94-99.

    Yang Yongqiang, Lu Jianbin, Wang Di, et al.. A study of 316L stainless steel non-horizontal overhanging surface in selective laser melting[J]. Material Science & Technology, 2011, 19(6): 94-99.

[3] 宋长辉, 杨永强, 叶梓恒, 等. 基于选区激光熔化快速成型的自由设计与制造进展[J]. 激光与光电子学进展, 2013, 50(8): 080026.

    Song Changhui, Yang Yongqiang, Ye Ziheng, et al.. Development of freeform design and manufacturing based on selective laser melting[J]. Laser & Optoelectronics Progress, 2013, 50(8): 080026.

[4] 苏旭彬. 基于选区激光熔化的功能件数字化设计与直接制造研究[D]. 广州: 华南理工大学, 2011.

    Su Xubin. Study on Digital Design and Direct Fabrication of Functional Parts Based on Selective Laser Melting[D]. Guangzhou: South China University of Technology, 2011.

[5] 杨永强, 罗子艺, 苏旭彬, 等. 不锈钢薄壁零件选区激光熔化制造及影响因素研究[J]. 中国激光, 2011, 38(1): 0103001.

    Yang Yongqiang, Luo Ziyi, Su Xubin, et al.. Study on process and effective factors of stainless steel thin-wall parts manufactured by selective laser melting[J]. Chinese J Lasers, 2011, 38(1): 0103001.

[6] 卢建斌, 杨永强, 王迪, 等. 选区激光熔化成型悬垂面质量的影响因素分析[J]. 激光技术, 2011, 35(2): 148-151.

    Lu Jianbin, Yang Yongqiang, Wang Di, et al.. Analysis of affecting factors of overhanging surface quality by selective laser melting [J]. Laser Technology, 2011, 35(2): 148-151.

[7] 刘洋, 杨永强, 王迪, 等. 激光选区熔化成型免组装机构的间隙特征研究[J]. 中国激光, 2014, 41(11): 1103007.

    Liu Yang, Yang Yongqiang, Wang Di, et al.. Study on the clearance feature of non-assembly mechanism manufactured by selective laser melting[J]. Chinese J Lasers, 2014, 41(11): 1103007.

[8] 王迪, 刘睿诚, 杨永强. 激光选区熔化成型免组装机构间隙设计及工艺优化[J]. 中国激光, 2014, 41(2): 0203004.

    Wang Di, Liu Ruicheng, Yang Yongqiang. Clearance design and process optimization of non-assembly mechanisms fabricated by selective laser melting[J]. Chinese J Lasers, 2014, 41(2): 0203004.

[9] 刘利. 光固化快速成型制件的精度研究[D]. 大连: 大连理工大学, 2005.

    Liu Li. Study on the Part Precision of Rapid Prototyping of Stereo Lithography Apparatus[D]. Dalian: Dalian University of Technology, 2005.

[10] 邹国林. 熔融沉积制造精度及快速模具制造技术的研究[D]. 大连: 大连理工大学, 2002.

    Zou Guolin. Study on Precision of FDM and Rapid Tooling Based on FDM & LOM[D]. Dalian: Dalian University of Technology, 2002.

[11] 吴伟辉, 杨永强, 卫国强. 选区激光熔化快速成型制造精密金属零件技术[J]. 中国激光, 2007, 34(增刊): 175-179.

    Wu Weihui, Yang Yongqiang, Wei Guoqiang. Direct manufacturing of precision metal parts by selective laser melting[J]. Chinese J Lasers, 2007, 34(S1): 175-179.

[12] 王迪, 杨永强, 吴伟辉. 光纤激光选区熔化316L不锈钢工艺优化[J]. 中国激光, 2009, 36(12): 3323-3329.

    Wang Di, Yang Yongqiang, Wu Weihui. Process optimization for 316L stainless steel by fiber laser selective melting[J]. Chinese J Lasers, 2009, 36(12): 3323-3329.

[13] 付立定. 不锈钢粉末选择性激光熔化直接制造金属零件研究[D]. 武汉: 华中科技大学, 2008.

    Fu Liding. Investigation into Manufacturing Metal Parts Direct from Stainless Steel Powders via Selective Laser Melting[D]. Wuhan: Huazhong University of Science & Technology, 2008.

[14] J P Kruth, B Vandenbroucke, J Van Vaerenbergh, et al.. Benchmarking of different SLS/SLM processes as rapid manufacturing techniques[J]. Int Conf Polymers & Innovations (PMI), 2005.

[15] K A Mumtaz, N Hopkinson. Selective laser melting of thin wall parts using pulse shaping[J]. Journal of Material Processing Technology, 2010, 210(2): 279-287.

[16] I Yadroitsev, Ph Bertrand, I Smurov. Parametric analysis of the selective laser melting process[J]. Applied Surface Science, 2007, 253(19): 8064-8069

[17] G A O Adam, D Zimmer. Design for additive manufacturing- element transitions and aggregated structures[J]. CIRP Journal of Manufacturing Science & Technology, 2014, 7(1): 20-28.

[18] J G Zhou, D Herscovici, C C Chen. Parametric process optimization to improve the accuracy of rapid prototyped stereolithography parts[J]. International Journal of Machine Tools and Manufacture, 2000, 40(3): 363-379.

[19] Y Tang, H Y Loh, Y S Wong, et al.. Direct laser sintering of a copper-based alloy for creating three-dimensional metal parts[J]. Journal of Materials Processing Technology, 2003, 140(1): 368-372.

[20] 王雷, 钦兰云, 佟明, 等. 快速成型制造台阶效应及误差评价方法[J]. 沈阳工业大学学报, 2008, 30(2): 318-321.

    Wang Lei, Qin Lanyun, Tong Ming, et al.. Multistip-like behavior and error evaluation method in rapid prototyping manufacturing [J]. Journal of Shenyang University of Technology, 2008, 30(2): 318-321.