[1] . DSCM 中摄像机光轴与物面不垂直引起的误差分析[J]. 清华大学学报:自然科学版, 2006, 46(11): 1930-1932.

    . Errors caused by misalignment of the optical camera axis and the object surface in the DSCM[J]. Journal of Tsinghua University:Sci&Tech, 2006, 46(11): 1930-1932.

[2] . 二维视觉测量中光轴与载物台垂直度调节方法[J]. 北京机械工业学院学报, 2006, 21(3): 35-38.

    . A method of verticality adjusting between optical axis and carrier in Two-Dimensional vision measurement[J]. Journal of Beijing Institute of Machinery, 2006, 21(3): 35-38.

[3] 骆新新，刘秉琦，孙东平. 关于激光测距机光轴平行性校正方法的改进 [J]. 应用光学，2009，30(3)：519-522.

    LUO Xin-xin，LIU Bing-qi，SUN Dong-ping. Improvement of optical axis parallelism correction for laser range finder [J]. Journal of Applied Optics，2009，30(3)：519-522.

[4] Murata N，Nosato H，Furuya T，et al. An automatic multi-objective adjustment system for optical axes using genetic algorithms[C]// Proceedings of the 5th International Conference on Intelligent Systems Design and Applications，2005： 546-551.

[5] . Auto-adjustment of the Objective Lens Neutral Position in Optical Disc Drives[J]. IEEE Transactions on Consumer Electronics(0098-3063), 2007, 53(4): 1463-1468.

[6] 章毓晋. 图像工程 [M]. 北京：清华大学出版社，2007.

    ZHANG Yu-jin. Image Engineering [M]. Beijing：Tsinghua University Press，2007.

[7] 张广军. 视觉测量 [M]. 北京：科学出版社，2008.

    ZHANG Guang-jun. Vision Measurement [M]. Beijing：Science Press，2008.

[8] Harris C，Stephens M. A Combined Corner and Edge Detector[C]// Proceedings of the 4th Alvey Vision Conference， Manchester，1988：147-151.

[9] . Subpixel Measurements Using a Moment-Based Edge Operator[J]. IEEE Transactions on Pattern Analysis and Machine Intelligence(S0162-8828), 1989, 11(12): 1293-1309.

[10] . 基于空间矩的角特征提取[J]. 控制与决策, 2005, 20(3): 325-328.

    . Corner detection based on spatial moment[J]. Control and Decision, 2005, 20(3): 325-328.