[1] 林凯莉, 杨武雄, 吕俊霞, 等. 2198-T851铝锂合金激光焊接工艺研究［J］. 中国激光, 2014, 41(1): 0103007.

    Lin Kaili, Yang Wuxiong, Lü Junxia, et al. Laser beam welding study of 2198-T851 aluminum-lithium alloy［J］. Chinese J Lasers, 2014, 41(1): 0103007.

[2] 蔡 华. 薄板2524高强铝合金光纤激光焊接接头组织及力学性能研究［D］. 北京: 北京工业大学, 2013.

    Cai Hua. Microstructural and mechanical properties of fiber laser beam welded thin sheet 2524 high strength aluminum alloy［D］. Beijing: Beijing University of Technology, 2013.

[3] 董皕喆, 杨武雄, 吴世凯, 等. 高强铝合金壁板结构T型接头辅助热源变形控制数值分析［J］. 中国激光, 2015, 42(8): 0803002.

    Dong Bizhe, Yang Wuxiong, Wu Shikai, et al. Numerical analysis on the deformation controlling of T-joint LBW with auxiliary heat source for high strength aluminum alloy［J］. Chinese J Lasers, 2015, 42(8): 0803002.

[4] Pakdil M, Cam G, Kocak M, et al. Microstructural and mechanical characterization of laser beam welded AA6056 Al-alloy［J］. Materials Science & Engineering A, 2011, 528(24): 7350-7356.

[5] Nélias D, Jullien J F, Deloison D. Experimental investigation and finite element simulation of laser beam welding induced residual stresses and distortions in thin sheets of AA 6056-T4［J］. Materials Science and Engineering: A, 2010, 527(12): 3025-3039.

[6] Bayraktar F S, Staron P, Kocak M, et al. Analysis of residual stress in laser welded aerospace aluminum T-joints by neutron diffraction and finite element modeling［C］. Materials Science Forum, 2008, 571: 355-360.

[7] Behler K, Beyer E, Wolf N, et al. Method for welding at high processing speed with polarized laser beam［C］. Proceedings of European Conference on Laser Treatment of Materials, 1990: 721-730.

[8] 左铁钏. 高强铝合金的激光加工［M］. 2版. 北京: 国防工业出版社, 2008: 133-137.

    Zuo Tiechuan. Laser materials processing of high strength aluminum alloys［M］. 2nd edition. Beijing: National Defense Industry Press, 2008: 133-137.

[9] Nishimoto K, Fujii H, Katayama S. Laser pressure welding of Al alloy and low C steel［J］. Science and Technology of Welding and Joining, 2006, 11(2): 224-231.

[10] Nishimoto K, Okumotoa Y, Haranoand T, et al. Laser pressure welding of aluminium and galvannealed steel［J］. Welding International, 2009, 23(10): 734-743.

[11] Nishimoto K, Haranoand T, Okumotoa Y, et al. Mechanical properties of laser-pressure-welded joint between dissimilar galvannealed steel and pure aluminium［J］. Welding International, 2009, 23(11): 817-823.

[12] 安 娜, 张心怡, 王启明, 等. 2060铝锂合金光纤激光填丝焊接工艺研究［J］. 中国激光, 2014, 41(10): 1003009.

    An Na, Zhang Xinyi, Wang Qiming, et al. Fiber laser welding of 2060 aluminum-lithium alloy with filler wire［J］. Chinese J Lasers, 2014, 41(10): 1003009.

[13] 李 飞, 邹江林, 孔晓芳, 等. 高功率光纤激光-TIG复合焊接实验研究［J］. 中国激光, 2014, 41(5): 0503004.

    Li Fei, Zou Jianglin, Kong Xiaofang, et al. Experimental research on high power fiber laser-TIG hybrid welding［J］. Chinese J Lasers, 2014, 41(5): 0503004.

[14] 魏 菁, 王 欢, 石少坚, 等. 10CrSiNiCu船用高强钢光纤激光焊接接头组织和性能［J］. 中国激光, 2016, 43(3): 0303003.

    Wei Jing, Wang Huan, Shi Shaojian, et al. Microstructure and properties of fiber laser wire welded joints of 10CrSiNiCu high strength shipbuilding steel［J］. Chinese J Lasers, 2016, 43(3): 0303003.

[15] 邹江林. 高功率光纤激光深熔焊接特性研究［D］. 北京: 北京工业大学, 2014.

    Zou Jianglin. Investigation on characterization of deep penetration welding with high power fiber laser welding［D］. Beijing: Beijing University of Technology, 2014.