尾纤模块研磨轨迹的仿真及实验研究
张轩, 陈淑英, 李慧鹏, 宋凝芳. 尾纤模块研磨轨迹的仿真及实验研究[J]. 半导体光电, 2016, 37(2): 197.
ZHANG Xuan, CHEN Shuying, LI Huipeng, SONG Ningfang. Simulation and Experiment Study of Pigtail Module Grinding Track[J]. Semiconductor Optoelectronics, 2016, 37(2): 197.
[1] 张维叙.光纤陀螺及其应用\[M\]. 北京：国防工业出版社，2008.
Zhang Weixu.Fiber-optic Gyroscope and Its Applications\[M\].Beijing: National Defence Industry Press,2008.
[2] Zhu W,Wang X H,Badzian A R, et al.New diamond science and technology\[C\]// RMS Inter. Conf. Proc.,1991:821-826.
[3] Luo Yongfeng.Research on alighment technology of direct-coupling IOC with fiber coil for high precision FOG\[D\].Beijing: Beijing University of Aeronautics and Astronautics,2009:1-15.
[4] Petermann K. Intensity-dependent nonreciprocal phase shift in fiber-optic gyroscopes for light sources with low coherence\[J\].Opt. Lett.,1982,7(12):623-625.
[5] 扎其斯基·J.玻璃与非静态材料\[M\]. 北京： 科学出版社, 2001.
Raqiski J.Glass and Non-static Materials\[M\]. Beijing: Science Press,2001.
[6] Huang H,Chen W K, Yin L, et al. Micro/meso ultra precision grinding of fibre optic connectors\[J\]. Precision Engin., 2004(28):95-105.
[7] Chang K Y,Song Y H, Lin T R. Analysis of lapping and polishing of gauge block\[J\]. The Inter. J. Adv. Manufacturing Technol., 2002,20(6):414-419.
[8] 刘德福，段吉安，钟掘.光纤连接器端面研磨装置运动分析\[J\].光学精密工程，2006,14(2):159-166.
[9] 吴昌林，王韦，李强，等.基于Preston方程的不锈钢曲面抛磨工艺参数分析\[J\]. 机械制造与自动化，2012,41(4):102-105.
Wu Changlin,Wang Wei, Li Qiang, et al. Analysis of polishing processing parameters of stainless steel curved surface based on preston equation\[J\]. Jiangsu Machine Building & Automation, 2012,41(4):102-105
张轩, 陈淑英, 李慧鹏, 宋凝芳. 尾纤模块研磨轨迹的仿真及实验研究[J]. 半导体光电, 2016, 37(2): 197. ZHANG Xuan, CHEN Shuying, LI Huipeng, SONG Ningfang. Simulation and Experiment Study of Pigtail Module Grinding Track[J]. Semiconductor Optoelectronics, 2016, 37(2): 197.
PDF全文
